Effect of impeller type and agitation on the performance of pilot scale ASBR and AnSBBR applied to sanitary wastewater treatment

The objective of this work was to assess the effect of agitation rate and impeller type in two mechanically stirred sequencing batch reactors: one containing granulated biomass (denominated ASBR) and the other immobilized biomass on polyurethane foam (denominated AnSBBR). Each configuration, with total volume of 1 m³, treated 0.65 m³ sanitary wastewater at ambient temperature in 8-h cycles. Three impeller types were assessed for each reactor configuration: flat-blade turbine impeller, 45°-inclined-blade turbine impeller and helix impeller, as well as two agitation rates: 40 and 80 rpm, resulting in a combination of six experimental conditions. In addition, the ASBR was also operated at 20 rpm with a flat-blade turbine impeller and the AnSBBR was operated with a draft tube and helix impeller at 80 and 120 rpm. To quantify how impeller type and agitation rate relate to substrate consumption rate, results obtained during monitoring at the end of the cycle, as well as the time profiles during a cycle were analyzed. Increasing agitation rate from 40 rpm to 80 rpm in the AnSBBR improved substrate consumption rate whereas in the ASBR this increase destabilized the system, likely due to granule rupture caused by the higher agitation. The AnSBBR showed highest solids and substrate removal, highest kinetic constant and highest alkalinity production when using a helix impeller, 80 rpm, and no draft tube. The best condition for the ASBR was achieved with a flat-blade turbine impeller at 20 rpm. The presence of the draft tube in the AnSBBR did not show significant improvement in reactor efficiency. Furthermore, power consumption studies in these pilot scale reactors showed that power transfer required to improve mass transfer might be technically and economically feasible.     

Ozone-induced foliar injury in saplings of Psidium guajava 'Paluma' in São Paulo, Brazil

Psidium guajava 'Paluma' was evaluated under field conditions as a tropical bioindicator species of ozone (O(3)). Three exposures of 90 days each were performed (June 21, 2004-March 19, 2005). In each one of them, saplings of 'Paluma' (n=30) were exposed to ambient air at a site in S?o Paulo (Brazil) with high ozone concentrations, and in a greenhouse with charcoal-filtered air. Ozone-like visible foliar injuries were observed during the winter, spring and summer exposures, when AOT40 reached 6166ppbh, 3504ppbh and 4828ppbh, respectively. No injuries were observed in the plants kept under filtered air. The injuries consisted in red stippling on adaxial leaf surfaces. They did not cover the veins and appeared first in older leaves, becoming more intense as the exposure period increased. Injury incidence, severity, and the cumulative exposure threshold at injury onset varied among the exposure periods. AOT40 explained partly the incidence, severity and leaf injury index LII (r(2)=0.52, 0.39, 0.38, respectively, p=0.002). The results confirm the potential of the species as an O(3)-sensitive bioindicator.     

Spontaneous ultra-weak light emissions from wheat seedlings are rhythmic and synchronized with the time profile of the local gravimetric tide

Semi-circadian rhythms of spontaneous photon emission from wheat seedlings germinated and grown in a constant environment (darkened chamber) were found to be synchronized with the rhythm of the local gravimetric (lunisolar) tidal acceleration. Time courses of the photon-count curves were also found to match the growth velocity profile of the seedlings. Pair-wise analyses of the data—growth, photon count, and tidal—by local tracking correlation always revealed significant coefficients (P?>?0.7) for more than 80% of any of the time periods considered. Using fast Fourier transform, the photon-count data revealed periodic components similar to those of the gravimetric tide. Time courses of biophoton emissions would appear to be an additional, useful, and innovative tool in both chronobiological and biophysical studies.     

The smartline approach to coastal vulnerability and social risk assessment applied to a segment of the east coast of Rio de Janeiro State, Brazil

A growing awareness of increasing trends in coastal erosion and flooding due to climate change is triggering a demand for the rapid assessment of the potential responses of the coastlines around the world, principally in locations where human occupation is especially endangered. Investigations of present and future physical vulnerability and associated social risk have, therefore, become crucial for coastal management. In order to provide a quick and simple methodology for the identification of vulnerable coastal segments, Sharples (2006) has proposed a mapping methodology, called the smartline approach, which consists of representing, by means of simple lines, a geomorphic classification of the hinterland, backshore and beaches. The aim of this paper is to apply the smartline approach to coastal vulnerability assessment with inclusion of social data. The results show that this methodology is appropriate for the indication of coastal segments with varying degrees of vulnerability to erosion and flooding and for the appraisal of the resulting social risk.     

Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers

This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.     

Synthesis of an organic–inorganic composite from calcium carbonate and Kraft lignin and its use as carrier material for controlled release of semiochemical agents

Environmental Science and Pollution Research - The control of pests in agricultural systems is currently based on the widespread use of pesticides that efficiently control pests but have negative...     

Comparative toxicity of effluents processed by different treatments in V79 fibroblasts and the algae Selenastrum capricornutum

The efficacy of ozonation and of photocatalysis processing in the treatment of pulp mill ECF (elementary chlorine free) bleaching and textile effluents was evaluated by determining total organic carbon reduction (TOC) and the toxicity. The chronic toxicity of the effluents was evaluated by the ability to inhibit the growth of algae Selenastrum capricornutum. Cultured hamster V79 fibroblasts were used to assess the cytotoxicity of effluents submitted to different detoxification processes. Two endpoints were measured in V79 cells: 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) reduction and neutral red uptake (NRU). Both treatment processes were able to reduce the TOC, although ozonization was less effective for pulp mill ECF bleaching. The pulp mill ECF bleaching and textile effluents reduced the growth of S. capricornutum by 39% and 27%, respectively. However, at the highest concentration tested, the textile effluents treated by photochemical process for 60 min showed increased cytotoxicity in V79 cells compared to the untreated effluent when assessed by the NRU and MTT reduction assays (increases of 30% and 40%, respectively). Pulp mill ECF bleaching effluent treated by ozonization had a similar cytotoxicity to that of untreated effluent in the NRU assay. In contrast, the MTT reduction assay indicated that effluents treated with ozone were around 20% more cytotoxic than untreated effluents. These results show that cultured fibroblasts may be useful for studying cellular responses to pollutants and may be included in tests to monitor the efficiency of effluent detoxification processes.     

Changes in levels of essential elements in suckling rats exposed to zinc and mercury

The effect of mercury and its interaction with zinc on the content of essential metals in tissues from neonate rats was investigated. Three-day-old Wistar rats were treated with saline or 27 mg kg(-1)d(-1) ZnCl2 (s.c.) for five consecutive days. From the 8th to the 12th day of life, the rats received one daily dose of saline or 5.0 mg kg(-1) HgCl2 (s.c). Twenty-four hours after the last injection liver, kidneys and blood were collected for metal quantification. The HgCl(2) exposure induced alterations on metal levels, such as increase of Fe, Hg and Zn in liver, decrease of Fe and Mg and increase of Cu and Hg contents in kidneys. The Hg exposure also increased Hg levels in the blood. The treatment with ZnCl2, administered previously to HgCl2, partially prevented the increase of Fe in the liver, and not only prevented the decrease of renal Mg but also increased it to levels higher than those found in control group. The Zn-Hg rats also presented higher renal Cu levels, and showed partially lower blood and hepatic Hg levels and higher renal Hg levels. The pre-administration of Zn caused no severe alterations in levels of essential metals (Cu, Fe, Mg and Mn). In short, Zn appears to be an alternative treatment of Hg poisoning in young animals in comparison to chelating drugs since these have low metal selectivity.     

Preparation and characterization of activated carbon from a new raw lignocellulosic material: Flamboyant (Delonix regia) pods

Activated carbons were prepared from flamboyant pods by NaOH activation at three different NaOH:char ratios: 1:1 (AC-1), 2:1 (AC-2), and 3:1 (AC-3). The properties of these carbons, including BET surface area, pore volume, pore size distribution, and pore diameter, were characterized from N₂ adsorption isotherms. The activated carbons obtained were essentially microporous and had BET surface area ranging from 303 to 2463 m² g⁻¹.¹³C (CP/MAS and MAS) solid-state NMR shows that the lignocellulosic structures were completely transformed into a polycyclic material after activation process, thermogravimetry shows a high thermal resistance, Boehm titration and Fourier-transform infrared spectroscopy allowed characterizing the presence of functional groups on the surface of activated carbons. Scanning electron microscopy images showed a high pore development. The experimental results indicated the potential use of flamboyant pods as a precursor material in the preparation of activated carbon.