Measurement of metal bioaccessibility in vegetables to improve human exposure assessments: field study of soil–plant–atmosphere transfers in urban areas,South China

The quality of cultivated consumed vegetables in relation to environmental pollution is a crucial issue for urban and peri-urban areas, which host the majority of people at the global scale. In order to evaluate the fate of metals in urban soil–plant–atmosphere systems and their consequences on human exposure, a field study was conducted at two different sites near a waste incinerator (site A) and a highway (site B). Metal concentrations were measured in the soil, settled atmospheric particulate matter (PM) and vegetables. A risk assessment was performed using both total and bioaccessible metal concentrations in vegetables. Total metal concentrations in PM were (mg kg^?1): (site A) 417 Cr, 354 Cu, 931 Zn, 6.3 Cd and 168 Pb; (site B) 145 Cr, 444 Cu, 3289 Zn, 2.9 Cd and 396 Pb. Several total soil Cd and Pb concentrations exceeded China’s Environmental Quality Standards. At both sites, there was significant metal enrichment from the atmosphere to the leafy vegetables (correlation between Pb concentrations in PM and leaves: r = 0.52, p < 0.05) which depended on the plant species. Total Cr, Cd and Pb concentrations in vegetables were therefore above or just under the maximum limit levels for foodstuffs according to Chinese and European Commission regulations. High metal bioaccessibility in the vegetables (60–79 %, with maximum value for Cd) was also observed. The bioaccessible hazard index was only above 1 for site B, due to moderate Pb and Cd pollution from the highway. In contrast, site A was considered as relatively safe for urban agriculture.     

PBDEs and PCDD/Fs in surface soil taken from the Taizhou e-waste recycling area,China

The emerging issue of electronic wastes (e-waste) and the associated environmental problems has gained considerable attention from the scientific community in recent decades. In the present study, the levels of polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the surface soil obtained from the Taizhou e-waste recycling area of China were investigated. Also the correlation among these chemicals and previously published data of heavy metals, polycyclic aromatic hydrocarbons, and polychlorinated biphenyls was analysed. We determined that the pollution levels of eight PBDEs congeners were serious, ranging from 27.9 to 3128.4 μg/kg. The concentration of PCDD/Fs was in the range of 218.3–3122.2 pg/g with a mean value of 659.5 pg/g. The PBDEs were not well-correlated with organic pollutants (PAHs and PCBs) in soil, whereas PCDD/Fs exhibited a significant positive correlation with the PCBs. The higher levels of persistent organic pollutants may pose potential adverse effects to soil quality and human beings and needs to be properly managed and remediated.     

Development of a complex-based flow injection spectrophotometric method for determination of the herbicide pinoxaden in environmental samples

A flow injection (FI) spectrophotometric method for the determination of the herbicide pinoxaden (PXD) has been proposed. PXD was converted in alkaline media with hydroxylamine hydrochloride to the hydroxamate salt. The salt was reacted with iron(III) chloride, and the absorbance of the red colored tris iron hydroxamate complex was measured at 500?nm using a FI system. The method was found to be linear between 0.5 and 40?mg?L^?1 with a molar absorptivity of 1.53?×?10^4?L?mol^?1?cm^?1. The limit of detection and limit of quantification were found to be 0.1?±?0.01?mg?L^?1 and 0.6?±?0.05?mg?L^?1, respectively. Any interference of fenoxaprop-p-ethyl (FE) was avoided by the separation of PXD by liquid chromatography with a mixture of dichloromethane and n-hexane (1?:?1) as eluent. The method was applied to the determination of PXD in soil, water, and wheat grains with percent recoveries of 98?±?2, 100?±?2, and 98?±?5, respectively. Sample throughput of 60 samples per hour was achieved under optimized conditions.     

Extraction,isolation, and identification of various environment friendly components from cock's comb (Celosia argentea) leaves for allelopathic potential

In this study, the aqueous extract of leaves of the plant cock's comb (Celosia argentea) was fractioned into five batches using n-hexane, dichloromethane, ethyl acetate, and n-butanol, respectively. High performance liquid chromatography analysis of the methanol re-dissolved residues of 3 polar fractions, including dichloromethane, ethyl acetate, and n-butanol separately which exhibited altogether 12 compounds identified as 4-hydroxycinnamic acid (p-coumaric acid), 4-hydroxybenzoic acid, protocatechuic acid, caffeic acid, m-coumaric acid, gallic acid, 4-hydroxybenzaldehyde, m-hydroxybenzaldehyde, 2,4-dihydroxybenzoic acid, pyrogallol, 3,5-dihydroxybenzoic acid, and genetic acid was categorized by retention time using known compounds. Similarly, the mass confirmation of most of the identified compounds was achieved by injecting 20 µl of composite sample of these three polar fractions into liquid chromatography–mass spectrometry. Similarly, the physiochemical analysis of C. argentea aqueous extract showed the presence of various constituents such as phenols, flavonoids, tannins, and glycosides. All four organic fractions were examined for phytotoxicity against Lepidium sativum. Analysis of variance showed significant differences among these fractions against germination and growth of L. sativum. Further allelopathic effects appeared to be concentration dependent. Thus, C. argentea may prove effective as a substitute of herbicides to control the weeds like L. sativum from attacking crops and to protect the environment from the health hazard effects of herbicides.     

Assessment of key parameters in municipal solid waste management: a prerequisite for sustainability

Municipal solid waste management was studied for 1 year in a representative urban area of Lahore city for environmental sustainability. The effects of financial status of the household and the seasonal variations on generation rate and compositions of municipal solid waste (MSW) were determined. MSW generation rate and the economic status of the households were positively correlated (p < 0.05). Seasonal variations observed were significant only for organics (p = 0.001), plastics (p = 0.008) and food waste fractions (p = 0.009) in MSW. Response surface regression model developed and analysed by Minitab-15® showed that the interaction of season and different economic zones of the town on the MSW generation rate was non-significant (p = 0.334). Elemental and heating value analyses of the mixed organic fractions in kitchen waste had carbon 47.93%, hydrogen 6.20%, nitrogen 2.24%, sulphur 0.23%, oxygen 39.01%, and C and N ratio 27.78. Findings concluded that food waste was 56% of total MSW with 71.03% moisture content and a modest heating value of 5566 J/g. Existing temporary storage capacity of MSW is 51% of the total MSW generated considering the weighted MSW generation rate of 0.57 kg/person/day calculated in this study. Composting could be a possible final disposal option due to high moisture and organic content and can be studied in future research. Development of a transfer station, introduction of home composting programmes and awareness towards proper segregation and reduction of waste at the household level is suggested to attain sustainability in the MSW management system.     

Estimation and validation of biomass of a mountainous agroecosystem by means of sampling,spectral data and QuickBird satellite image

Biomass estimation in agroecosystems (AESs) is important to understand their role in carbon exchange for a sustainable environment. We used field spectra and sampled biomass of an AES including cultivated and abandoned croplands to develop a simple biomass estimation model. The digital number (DN) of a QuickBird (QB) satellite image was converted to a reflectance factor using the dark object subtraction method and the spectral reflectance of asphalt. The relationship between the reflectance factor of field-based spectra and the QB image obtained in early July 2007 was insignificant in the blue (R ² = 0.15) and green (R ² = 0.18) bands but was significant (p < 0.05) in the red (R ² = 0.57) and near-infrared (NIR, R ² = 0.45) bands in the AES. Better correlations were obtained between field-based and QB-based vegetation indices (VIs). The best correlations were obtained with the normalized difference vegetation index (NDVI) (R ² = 0.97, p < 0.001) and the ratio vegetation index (RVI) (R ² = 0.99, p < 0.001). Biomass was significantly correlated with both field-based NDVI and RVI (R ² = 0.79 and 0.72, respectively, p < 0.001). Although RVI saturated at higher biomass densities (>600 g m^?2), NDVI showed a linear relationship. Other field-based VIs showed poorer correlations with biomass. The model was evaluated by incorporating it into high-resolution QB images to obtain the observed biomass. The relationship between field-estimated and QB-observed biomass appeared to be a one-to-one linear relationship (R ² = 0.79). Thus, models using field spectra and sampled biomass can be applied to QB images for remote estimation of biomass in an AES.     

Anaerobic co-digestion of municipal solid organic waste with melon residues to enhance biodegradability and biogas production

Management of solid organic waste has become a major challenge in developing countries. Raw solid organic waste can be converted into biogas through anaerobic digestion; however, the efficiency of the process is influenced by various factors including the composition of the substrate. The present study was designed with the objective of enhancing the biodegradability of the organic fraction of municipal solid waste (OFMSW) and biogas production through co-digestion of the substrate with melon residues. The study was conducted in batch mode in four phases. The results revealed that an addition of melon waste at the rate of 300?g?kg^?1 OFMSW substantially increased the biodegradation rate and biogas production compared to OFMSW alone. The removal of up to 57.2?% volatile solids and a carbon to nitrogen (C/N) ratio of 15.9 was achieved at a 60?% water level when the digestion mixture was treated with inocula collected from partially-degraded food waste. The findings of this study reveal that melon residues could be used as a potential co-substrate to enhance the biodegradability of OFMSW and biogas production.     

Phosphorus sorption and availability in soils amended with animal manures and sewage sludge

Soils that receive large applications of animal wastes and sewage sludge are vulnerable to releasing environmentally significant concentrations of dissolved P available to subsurface flow owing to the gradual saturation of the soil's P sorption capacity. This study evaluated P sorption (calculated from Langmuir isotherms) and availability of P (as CaCl2-P and resin P) in soils incubated for 20 d with poultry litter, poultry manure, cattle slurry, municipal sewage sludge, or KH2PO4, added on a P-equivalent basis (100 mg P kg(-1)). All the P sources had a marked negative effect on P sorption and a positive effect on P availability in all soils. In the cattle slurry- and KH2PO4-treated soils, the decreases in P sorption maximum (19-66%) and binding energy (25-89%) were consistently larger than the corresponding decreases (7-41% and 11-30%) in poultry litter-, poultry manure-, and sewage sludge-treated soils. The effects of cattle slurry and KH2PO4 on P availability were, in most cases, larger than those of the other P sources. In the poultry litter, poultry manure, and sewage sludge treatments, the increase in soil solution P was inversely related (R2 = 0.75) to the input of Ca from these relatively high Ca (13.5-42 g kg(-1)) sources. Correlation analyses implied that the magnitude of the changes in P sorption and availability was not related to the water-extractable P content of the P sources. Future research on the sustainable application of organic wastes to agricultural soils needs to consider the non-P- as well as P-containing components of the waste.     

Probing the potential of polyester for CO2 capture

Global warming, the major environmental issue confronted by humanity today, is caused by rising level of green house gases. Carbon capture and storage technologies offer potential for tapering CO2 emission in the atmosphere. Adsorption is believed to be a promising technology for CO2 capture. For this purpose, a polyester was synthesized by polycondensation of1,3,5-benzenetricarbonyl trichloride and cyanuric acid in pyridine and dichloromethane mixture. The polymer was then characterized using FT-IR, TGA, BET surface area and pore size analysis, FESEM and CO2 adsorption measurements. The CO2 adsorption capacities of the polyester were evaluated at a pressure of 1 bar and two different temperatures（273 and 298 K）.The performance of these materials to adsorb CO2 at atmospheric pressure was measured by optimum CO2 uptake of 0.244 mmol/g at 273 K. The synthesized polyester, therefore, has the potential to be exploited as CO2 adsorbent in pre-combustion capture process.     

Sludge granulation and e ciency of phase separator in UASB reactor treating combined industrial e uent

Sludge granulation and the effect of gas-liquid-solid separator （GLSS） design on the efficiency of upflow anaerobic sludge blanket （UASB） and upflow anaerobic sludge filter （UASF） reactors, operating at HRTs ranging from 3 to 12 h was investigated. VSS/TS ratio gradually increased in both the reactors with increasing sludge age （from 0.5 to more than 0.7 for UASB reactor and 0.012 to 0.043 for UASF reactor）. X-Ray diffraction analysis of the UASF sludge showed the presence of expanding clays revealing its additional absorption capability. Fuoraphyllite and albite precipitation related to excellular polymers of the microbial shell structure, showed the extended growth of microorganisms during sludge granulation. A gradual decrease （82%-69%） in COD removal with decreasing HRT was apparent in UASF reactor. In case of UASB reactor, this decrease was marginal because addition of GLSS device significantly improved （14%-20%） the overall efficiency of the UASB reactor. GLSS enhanced the efficiency of the UASB reactor by increasing the settleability of suspended particles and accelerating the coagulation of colloidal particles due to the velocity gradient.