Assessment of physicochemical characteristics of Ganga Canal water quality in Uttarakhand

Assessment of physicochemical parameters of Ganga Canal water was carried out during 2012–2013 at Haridwar (Uttarakhand) with two different sites, i.e., Bhimgoda Barrage (site 1—control site) and Bahadrabad (site 2—contaminated site), where canal water flows with loads of pollution from highly commercial and industrial areas. During investigation, maximum turbidity (287.72 ± 56.28 JTU), total solids (1167.60 ± 303.90 mg l^?1), free CO₂ (1.88 ± 0.22 mg l^?1), total hardness (60.14 ± 1.13 mg l^?1), pH (7.1 ± 0.13), nitrate (0.048 ± 0.010), nitrite (0.019 ± 0.001), biochemical oxygen demand (2.866 ± 1.098), chemical oxygen demand (6.8 ± 2.61) and phosphate (0.087 ± 0.015), while minimum velocity (1.71 ± 0.19 ms^?1), transparency (0.12 ± 0.08 m) and dissolved oxygen (7.95 ± 0.44 mg l^?1) were recorded in monsoon season at site 2 in comparison with site 1. The mean values of these parameters were compared with WHO and ISI standards and found significant differences (p < 0.05) in the mean values of turbidity, total solids, pH, dissolved oxygen, free CO₂ and total hardness with sampling sites. The turbidity of both the sites 1 and 2 was recorded above the permissible limit. Turbidity of site 2 is much higher than of site 1, so it is counted as more polluted. The values of the studied parameters were more during monsoon season and summer season at site 2 as compared to site 1. The results indicated that most of the physicochemical parameters from Ganga Canal system were within or at periphery in comparison with permissible limit of ISI and WHO for drinking water and therefore may be suitable for domestic purposes, but it requires perceptible consideration due to intense changes in climate and increase in pollution.     

Predicting Streambed Sediment and Water Column Escherichia coli Levels at Watershed Scale

A sub‐model for the Soil and Water Assessment Tool (SWAT) is developed to predict Escherichia coli levels in the streambed sediment as well as in the water column. New formulations to estimate the levels of E. coli in streambed sediment and the water column are derived. These equations include calculations of E. coli resuspension from the streambed sediment to the water column, E. coli deposition from the water column to the streambed sediment, E. coli growth in the streambed sediment and the water column, and instream E. coli routing. These formulations were programmed in FORTRAN and integrated into SWAT. The modified SWAT model was applied to Squaw Creek Watershed, Iowa, to predict E. coli levels in the stream. Escherichia coli concentrations in the streambed sediment and the water column were monitored extensively in this watershed, and observations were used to verify the model predictions. The model proposed here can predict E. coli concentrations in streambed sediment as well as in the water column. Approximately 58% of the predictions of E. coli levels in the bed sediment were within 1 order of magnitude from the observed value, and in the water column 83% of the predictions of E. coli levels were within 1 order of magnitude. Results suggest that the proposed model will help predictions of instream bacterial contamination.     

Modelling fertility: an application of count regression models

Often the lifecycle data occur as count of the vital events and are recorded as integers. The purpose of this article is to model the fertility behavior based on religious, educational, economic, and occupational characteristics. The responses of classified groups according to these determinants are examined for significant influence on fertility using Poisson regression model (PRM) based on the National Family Health Survey -3 dataset. The observed and predicted probabilities under PRM indicate modal value of two children for the Poisson distribution modeled data. Presence of dominance of two child in the data motivates the authors to adopt multinomial regression model (MRM) in order to link fertility with various socioeconomic indicators responsible for fertility variation. Choice of the explanatory factors is limited to the availability of data. Trends and patterns of preference for birth counts suggest that religion, caste, wealth, female education, and occupation are the dominant factors shaping the observed birth process. Empirical analysis suggests that both the models used in the study perform similarly on the sample data. However, fitting of MRM by taking birth count of two as comparison category shows improved Akaike information criterion and consistent Akaike information criterion values. Current work contributes to the existing literature as it attempts to provide more insight into the determinants of Indian fertility using Poisson and MRM.     

Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip

In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip.     

Indicator-Based Approach for Assessing the Vulnerability of Freshwater Resources in the Bagmati River Basin,Nepal

To assess the vulnerability of water resources in the Bagmati River Basin in Nepal, this paper adopts an indicator-based approach wherein vulnerability is expressed as a function of water stress and adaptive capacity. Water stress encompasses indicators of water resources variation, scarcity, and exploitation and water pollution, whereas adaptive capacity covers indicators of natural, physical, human resource, and economic capacities. Based on the evaluation of eleven indicators, which were aggregated into eight vulnerability parameters, an increasingly stressful situation and lack of adaptive capacity became evident. Considerable spatial variation in indicator values suggests differential policy options. While the northern parts need attention to reduce pollution loading and conserve vegetation cover, the southern parts need improvements in physical capacity, i.e. water infrastructures. The comprehensive and easily interpretable findings of the study are expected to help decision makers reach sound solutions to reduce freshwater resources vulnerability in the Bagmati River Basin, Nepal. With its inherent flexibility, the approach has demonstrated its potential for application in different times and areas for monitoring and comparison purposes.     

Effect of nickel-stresses on uptake, pigments and antioxidative responses of water lettuce, Pistia stratiotes L

Water lettuce plants were exposed to various concentrations (0, 0.01,0.1, 1.0 and 10.0 ppm) of nickel as nickel sulphate in nutrient medium. The effect of graded nickel (Ni +2) concentrations on visible symptoms of toxicity, pigments (chlorophyll a, b and total) and antioxidative attributes were evaluated. Plants exposed to high nickel (1.0 and 10.0 ppm) showed visible toxicity symptoms, such as wilting, chlorosis in young leaves, browning of root tips and broken off roots, observed at 6 days after treatment. Nickel was accumulated more in root (863.3 microg g-1 dry weight) than leaves (116.2 microg g-1 dry weight) at 6 days of treatment. Nickel exposure decreased chlorophyll a, b and total chlorophyll contents. Relative water content decreased at high nickel (1.0 and 10.0 ppm).Antioxidants, such as proline content and peroxidase activity increased with increase in nickel concentrations, whereas, other carotenoids and protein contents at 1.0 ppm and activity of catalase at 10 ppm of nickel were decreased. The low level of nickel stimulates photosynthetic pigments and antioxidative attributes. The study may be helpful in phytoremedial strategies and biological indication of nickel toxicity in aquatic plants.     

Characterization of two metal resistant Bacillus strains isolated from slag disposal site at Burnpur, India

Two strains of Bacillus sp. resistant to arsenate and lead designated as AsSP9 and PbSP6, respectively were isolated from the slag disposal site. They were identified to be related to Bacillus cereus cluster on the basis of 16S rDNA based sequence analysis and phenotypic characteristics. Both were rod-shaped (AsSP9, 2-5 microm and PbSP6, 2-4 microm), aerobic, salt tolerant (2-8% NaCI), endospore forming bacteria with minor differences like the AsSP9 showed sporangial bulging and PbSP6 had positive lipase activity. The temperature range for their growth was 20-40 degrees C and pH range 6.0-9.0 with an optimum temperature of 37 degrees C and pH of 7 for both strains. The principal nitrogen sources forAsSP9 and PbSP6 were DL-Tryptophan and L-Phenylalanine, respectively. The suitable carbon source forAsSP9 was lactose and for PbSP6 sucrose. The heavy metal accumulation efficiency was found to be 0.0047 mg g(-1) of dry mass forAsSP9 and 0.686 mg g(-1) of dry mass for PbSP6.     

Histopathological alterations in hepatopancreas of Gafrarium divaricatum exposed to xylene, benzene and gear oil-WSF

Gafrarium divaricatum were exposed to xylene (4.25 and 8.50 mg l(-1)), benzene (4.35 and 8.70 mg l(-1)) and gear oil-WSF (1 and 2%) for 30 days. Chronic exposure of clams to the pollutants resulted in loss of bubbling epithelium, reduction in cytoplasm volume and density, fusion of cell membranes and nuclei forming darkly stained area at basal part of the cells. Disintegration of basement membrane due to damaged epithelial cells, disruption of inner lining of tubule, formation of necrotic spaces, separation of epithelial cells from basement membrane, increase in internal luminar area, complete necrosis of epithelial cells as well as occurrence of cell debris in between the tissue were also observed in the clams due to chronic exposure of the toxicants.     

Discussion of “Mahmodinia,S., & Javan,M. (2021). Vortical structures,entrainment and mixing process in the lateral discharge of the gravity current. Environmental Fluid Mechanics, 21(5), 1035–1067”

Environmental Fluid Mechanics - The authors of the discussed paper presented an interesting study of the lateral gravity currents for the different flow conditions. The authors showed the...