Synergetic integration of laccase and versatile peroxidase with magnetic silica microspheres towards remediation of biorefinery wastewater

In this study, a tailor-made biocatalyst consisting of a co-immobilized lignolytic enzyme cascade on multi-functionalized magnetic silica microspheres (MSMS) was developed. Physical adsorption was the most promising strategy for the synthesis of individual immobilized laccase (IL), immobilized versatile peroxidase (IP), as well as co-immobilized laccase (Lac) and versatile peroxidase (VP) with an enzyme activity recovery of about 79, 93, 27, and 27.5%, respectively. Similarly, the biocatalytic load of 116, 183, 23.6, and 31 U/g was obtained for IL, IP, and co-immobilized Lac and VP, respectively. The co-immobilized enzyme system exhibited better pH stability than the free and individual immobilized system by retaining more than 100% residual activity at pH 7.0 after a 150-h incubation; whereas, the thermal stability and kinetics of the co-immobilized biocatalyst were not much improved. IL and IP could be recycled for 10 cycles after which they retained 31 and 44% of their initial activities. Co-immobilized Lac and VP were reused for ten consecutive cycles at the end of which Lac activity was depleted, and 37% of VP activity was left. Free enzymes, IL, IP, co-immobilized Lac, and VP were applied to biorefinery wastewater (BRW) in a batch study to investigate the transformation of phenolic contaminants over a period of 5 days. The major classes of phenolic constituents in terms of their order of removal in a Lac-VP system was phenol >2-chlorophenol > trichlorophenol > dichlorophenol > cresols > dimethylphenol >2 methyl- 4, 6-dinitrophenol > 4-nitrophenol > tetrachlorophenols > pentachlorophenol. The free enzymes and individually immobilized enzymes resulted in 80% dephenolization in 5 days. By contrast, the co-immobilized biocatalyst provided rapid dephenolization yielding the same 80% removal within 24 h and 96% removal of phenols in 60 h after which the system stabilized, which is the major advantage of the co-immobilized biocatalyst.

Open image in new window

? Graphical abstract

     

Evaluating multi-stakeholder perceptions of project impacts: a participatory value-based multi-criteria approach

This paper describes a participatory multi-stakeholder impact assessment approach based on the concept of a value tree (VT), generated using the value focused thinking method (VFT) developed by Keeney (1992 Keeney, R. 1992. Value-focused thinking, Cambridge, MA: Harvard University Press.  [Google Scholar]). This approach allows stakeholders to specify impact parameters to be evaluated, which in the context of the VT, are organized as goals, objectives and alternatives. The approach is implemented in two phases: Phase I is designed to formulate stakeholders' collective VT following VFT concepts and the cognitive mapping method, and Phase II is a participatory valuation approach based on the VT formed in Phase I. The VT and the VFT concepts are adopted as tools to capture different stakeholders' values, goals and perceptions. The resulting VT is structured as a hierarchy between goals and objectives, and a network consisting of relationships, linkages and cross-impacts of the different alternatives and objectives. The hierarchy and network structure enables stakeholders to decompose complex assessment problem into ‘smaller’ units, which makes for easier and clearer assessment context, without ignoring linkages of the units or assessment elements. The second phase allows stakeholders to express their preferences with respect to each assessment element, through a voting system that ultimately leads to measures of importance or relative weights associated with each element. A modified Analytic Hierarchy Process (called Analytic Network Process) was used to distill relative weights from the voting results. Results obtained from a case study in a Zimbabwean community forest show that the proposed approach is easy to implement and can address questions about whether a project can lead to a positive change in attitudes, and whether the changes actually lead to a propensity to adopt alternatives that the project supports (e.g. conservation-oriented alternatives).     

Size-resolved effective density of submicron particles during summertime in the rural atmosphere of Beijing, China

Particle density is an important physical property of atmospheric particles.The information on high time-resolution size-resolved particle density is essential for understanding the atmospheric physical and chemical aging processes of aerosols particles.In the present study,a centrifugal particle mass analyzer(CPMA) combined with a differential mobility analyzer(DMA) was deployed to determine the size-resolved effective density of 50 to 350 nm particles at a rural site of Beijing during summer 2016.The measured particle effective densities decreased with increasing particle sizes and ranged from 1.43 to 1.55 g/cm~3,on average.The effective particle density distributions were dominated by a mode peaked at around 1.5 g/cm~3 for 50 to350 nm particles.Extra modes with peaks at 1.0,0.8,and 0.6 g/cm3 for 150,240,and 350 nm particles,which might be freshly emitted soot particles,were observed during intensive primary emissions episodes.The particle effective densities showed a diurnal variation pattern,with higher values during daytime.A case study showed that the effective density of Aitken mode particles during the new particle formation(NPF) event decreased considerably,indicating the significant contribution of organics to new particle growth.     

Scattering cross-section emission factors for visibility and radiative transfer applications: military vehicles traveling on unpaved roads

Emission factors for particulate matter (PM) are generally reported as mass emission factors (PM mass emitted per time or activity) as appropriate for air quality standards based on mass concentration. However, for visibility and radiative transfer applications, scattering, absorption, and extinction coefficients are the parameters of interest, with visibility standards based on extinction coefficients. These coefficients (dimension of inverse distance) equal cross-section concentrations, and, therefore, cross-section emission factors are appropriate. Scattering cross-section emission factors were determined for dust entrainment by nine vehicles, ranging from light passenger vehicles to heavy military vehicles, traveling on an unpaved road. Each vehicle made multiple passes at multiple speeds while scattering and absorption coefficients, wind velocity and dust plume profiles, and additional parameters were measured downwind of the road. Light absorption of the entrained PM was negligible, and the light extinction was primarily caused by scattering. The resulting scattering cross-section emission factors per vehicle kilometer traveled (vkt) range from 12.5 m2/vkt for a slow (16 km/ hr), light (1176 kg) vehicle to 3724 m2/vkt for a fast (64 km/hr), heavy (17,727 kg) vehicle and generally increase with vehicle speed and mass. The increase is approximately linear with speed, yielding emission factors per vkt and speed ranging from 4.2 m2/(vkt km/hr) to 53 m2/(vkt km/hr). These emission factors depend approximately linearly on vehicle mass within the groups of light (vehicle mass < or =3100 kg) and heavy (vehicle mass >8000 kg) vehicles yielding emission factors per vkt, speed, and mass of 0.0056 m2/(vkt km/hr kg) and 0.0024 m2/(vkt km/hr kg), respectively. Comparison of the scattering cross-section and PM mass emission factors yields average mass scattering efficiencies of 1.5 m2/g for the light vehicles and of 0.8 m2/g for the heavy vehicles indicating that the heavy vehicles entrain larger particles than the light vehicles.     

Spatial distribution of fossil fuel derived CO2 over India using radiocarbon measurements in crop plants

Examining the contribution of fossil fuel CO₂to the total CO₂changes in the atmosphere is of primary concern due to its alarming levels of fossil fuel emissions over the globe,specifi cally developing countries.Atmospheric radiocarbon represents an important observationa constraint and utilized to trace fossil fuel derived CO₂(CO_2ff) in the atmosphere.For the firs time,we have presented a detailed analysis on the spatial distribution of fossil fuel der...     

Improving the dynamic response of frequency and power in a wind integrated power system by optimal design of compensated superconducting magnetic energy storage

The frequency deviation and power fluctuation need to be controlled in a wind-integrated power system (WIPS) for keeping the balance between system power generation and demand, which support the quality and stability of overall power system. The present paper addresses this problem while concerning the integration of intermittent wind power and load disturbance into the WIPS. With this intent, it proposes the compensated superconducting magnetic energy storage (CSMES) system with proportional integral derivative (PID) controller for improving the frequency and power deviation profile. A novel swarm intelligence-based artificial bee colony (ABC) algorithm is used for optimal design of PID-CSMES system. Robustness of the proposed ABC-based PID-CSMES control strategy is tested in WIPS under various disturbance patterns of load and wind power. To demonstrate the improved dynamic response, their simulation results are compared with particle swarm optimization-based PID-CSMES, PID with SMES, and only PID controller technique. The performance indices and transient response characteristics of frequency and power deviation are used to evaluate and compare the accuracy and efficiency of each controller. Stability of various system configurations is analyzed using eigenvalue location. Comparing the results of different controller in WIPS indicates a substantial improvement in the dynamic response of system frequency and power deviations by utilizing the proposed control strategy.     

An effective dietary survey framework for the assessment of total dietary arsenic intake in Bangladesh: Part-A—FFQ design

Groundwater contaminated with arsenic (As), when extensively used for irrigation, causes potentially long term detrimental effects to the landscape. Such contamination can also directly affect human health when irrigated crops are primarily used for human consumption. Therefore, a large number of humans are potentially at risk worldwide due to daily As exposure. Numerous previous studies have been severely limited by small sample sizes which are not reliably extrapolated to large populations or landscapes. Human As exposure and risk assessment are no longer simple assessments limited to a few food samples from a small area. The focus of more recent studies has been to perform risk assessment at the landscape level involving the use of biomarkers to identify and quantify appropriate health problems and large surveys of human dietary patterns, supported by analytical testing of food, to quantify exposure. This approach generates large amounts of data from a wide variety of sources and geographic information system (GIS) techniques have been used widely to integrate the various spatial, demographic, social, field, and laboratory measured datasets. With the current worldwide shift in emphasis from qualitative to quantitative risk assessment, it is likely that future research efforts will be directed towards the integration of GIS, statistics, chemistry, and other dynamic models within a common platform to quantify human health risk at the landscape level. In this paper we review the present and likely future trends of human As exposure and GIS application in risk assessment at the landscape level.     

Investigation on physical properties of nanobubbled water using gas water circulation method: Environmental perspective

The objective of this present study is to examine the effect of nanobubbles on the physical properties improvement in the chosen water sample. So far, the research outcomes stated that the physical properties could be enhanced by addition of nanoparticles, but very few studies were performed with nanobubbles. The unique properties of nanobubbles (70–120 nanometers) explain their use in a wide range of engineering fields. Simple method for producing nanobubbles in a variety of aqueous solutions along with examples of their use is outlined in this work. Global environmental issues, including the deterioration and depletion of water supply are driving today's need for water treatment technology. As a solution, the use of micro- and nano-bubble (MNB) technologies in wastewater treatment has evolved. This page discuss the fundamentals of water treatment research, including their stability of bubbles, manufacturing processes, and chemical and physical features.     

Valorization of granite production dust in development of rich and lean cement mortar

Journal of Material Cycles and Waste Management - Granite mining, cutting and processing generates huge amount of waste which is dumped in open landfills. The objective of this research is to...