Overview of the relationship between organizational and workplace factors and injury rates

This paper summarizes data from ten studies examining the relationship between organizational and workplace factors and injury rates. The studies were identified from a systematic literature search, as well as from other sources, and were included if they reported comparisons among at least 20 workplaces. Factors that were examined in at least two studies were identified. Their relationship with injury rates was determined. It was not possible to make quantitative comparisons between studies. We looked for ‘consistency’ or ‘contradiction’ in the relationships. Among the variables ‘consistency’ associated with lower injury rates were: empowerment of the workforce (in general matters); delegation of safety activities; and an active role (in health and safety) of top management. Among the ‘contradictory’ variables were the level and use of discipline for safety violations; and several others that were contradictory only in subgroups of the same study. We discuss the limitations of synthesizing results from the diverse studies.     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

Industrial relations,worksite stress reduction,and employee well-being: A participatory action research investigation

The workplace has become the locus of many stress management and stress reduction interventions. However, little attention has focused on how worksite factors affect the implementation and impact of such interventions. In this paper, we investigate the effect of new versus traditional industrial relations practices on the impact of a worksite stress reduction program in a manufacturing setting. More specifically, a participatory action research (PAR) stress project is described and evaluated in two different labor–management relations contexts. One organization is characterized by the emerging ’new‘ industrial relations system where labor–management relations incorporate elements of joint problem-solving. The other organization has a more traditional approach where labor–management relations are formally adversarial. Results indicate that the labor–management relations context did influence the impact of the stress project. Involvement in the PAR stress project enhanced employee participation in decision-making in both contexts. However, involvement in the stress project enhanced employees' perceptions of the climate for participation only in the organization with more cooperative industrial relations. Increases in coworker support and decreases in depressive symptoms were associated with involvement in the PAR stress project in the organization with more adversarial industrial relations.     

Releases of phosphate fertilizer industry in the surrounding environment: Investigation on heavy metals and polonium-210 in soil

Distribution of Cu,Zn,Pb,Cr,Ni,Mn concentrations and the activity of polonium-210 in the surrounding area of a phosphate fertilizer industry located on the eastern coast of the Mediterranean Sea has been determined.Nineteen sampling sites were distributed around the industrial zone on a surface area of about 100,000 m2.Atomic absorption spectroscopy and Alpha spectroscopy were used to quantify the heavy elements and polonium-210,respectively.Investigation on a particle scale was conducted by TEM and SEM coupled to EDX and X-ray cartography to determine the nature of heavy elements carriers and their distribution.Heavy elements were mainly concentrated inside the particle size fraction 50 μm.Their levels decreased with distance increasing from the industry.According to the reference soil,enrichment factors were about 10,15,32 and 100 times for Zn,Pb,Cu,and Cr,respectively inside the particle size fraction 50 μm on the closest sites to the industry.The main contaminant sources were transport and storage of row materials and the free release of phosphogypsum waste.Heavy elements were entrapped inside agglomerates of sulfates,phosphates and iron oxihydroxides in a di used shape.Polonium-210 with an enrichment factor of about 56,showed the same behavior of the spatial distribution of the trace elements.     

Enhanced and irreversible sorption of pesticide pyrimethanil by soil amended with biochars

Biochar derived from partial combustion of vegetation is ubiquitous and potentially effective in sequestration of environmental contaminants.Biochars were prepared by burning of red gum(Eucalyptus spp.) woodchips at 450 and 850°C(labeled as BC450 and BC850).These two biochars were found to possess markedly different properties in terms of surface area and porosity.Short-term equilibration tests(24 hr) were conducted to assess the sorption-desorption behavior of pyrimethanil in the soil amended with various amounts of biochar of each type,with a special focus on the desorption behavior of the sorbed pesticide through four times successive desorption by dilution.Sorption coefficient and isotherm nonlinearity of the amended soils progressively increased with the content of biochar in the soil.Biochar BC850 with higher surface area and microporosity showed a stronger effect on the reversibility of sorption pesticide.The soils amended with 5% BC450 and 1% BC850 had nearly the same sorption capacity for pyrimethanil;however,their desorption processes were very different with 13.65% and 1.49% of the sorbed pesticide being released,respectively.This study suggested that biochar in soil could be an important factor for immobilization of a pesticide and thus affecting its environment fate in soil.     

Improving construction site safety through leader-based verbal safety communication

Background

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. Method: A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n = 1,693 interviews), construction site safety level (correct vs. incorrect, n = 22,077 single observations), and safety climate (seven dimensions, n = 105 questionnaires) are measured over a period of up to 42 weeks. Results: Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures. Conclusions: Coaching construction site foremen to include safety in their daily verbal exchanges with workers has a significantly positive and lasting effect on the level of safety, which is a proximal estimate for work-related accidents. It is recommended that future studies include coaching and feedback at all organizational levels and for all involved parties in the construction process. Building client regulations could assign the task of coaching to the client appointed safety coordinators or a manager/supervisor, and studies should measure longitudinal effects of coaching by following foremen and their work gangs from site to site.     

TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.