Oxygen uptake in relation to group size in the juveniles of a climbing perch, Anabas testudineus (Bloch)

The present work reports oxygen uptake in relation to group size in the juveniles (body weight: 0.70 to 1.30 g) of a climbing perch, Anabas testudineus (Bloch). The experiments were conducted at 21.5 +/- 1.0 degrees C using a cylindrical glass respirometer having continuous water flow system. With an increase in the number of fish at an interval of 5 from 5 to 40 in each fourth subsequent experiment, the weight specific aquatic oxygen uptake of a fish decreased from 0.192 +/- 0.030 to 0.800 +/- 0.006 ml O2 x g(-1)x(h(-1). When compared with a controlled fish, there was a reduction of 27.80% in the oxygen uptake in a group of 5 but 58.39% in a group of 40. A negative and significant correlation (r = 0.8411, p < 0.01) was calculated between oxygen uptake and group size of fishes. The investigation showed that probably due to shoaling behaviour, the aquatic oxygen uptake in the juveniles of A. testudineus always remained high in controlled fish or a fish in isolation than when they were in a group.     

Inverse Modeling for Aquatic Source and Transport Parameters Identification and its Application to Fukushima Nuclear Accident

Inverse modeling technique based on nonlinear least square regression method (LSRM) is developed for the identification of aquatic source and transport parameters. Instantaneous line source release model in two-dimensional domain and continuous point source release model in three-dimensional domain are used for the purpose. Case studies have been carried out for both types of releases to illustrate their application. Error analysis has been carried out to identify the maximum error that can be tolerated in the input concentration data used in the inverse model and to specify the minimum number of sampling points to generate such input data. The LSRM is compared with the well-established correlation coefficient optimization method for instantaneous line source release model, and good comparison is observed between them. The LSRM is used to quantitatively estimate the releases of different radionuclides into the Pacific Ocean which has resulted due to the discharge of highly radioactive liquid effluent from the affected Daiichi Nuclear Power Station at Fukushima in Japan. The measured concentrations of these radionuclides in seawater samples collected from two sampling points near Fukushima are used for the estimation. The average release works out to be 1.09?×?10¹⁶ for ¹³¹I, 3.4?×?10¹⁵ Bq for ¹³⁴Cs, and 3.57?×?10¹⁵ Bq for ¹³⁷Cs. Very good agreement is observed between the releases estimated in this study and those estimated by other different agencies.     

Analysis of the toxicogenomic effects of exposure to persistent organic pollutants (POPs) in Slovakian girls: correlations between gene expression and disease risk

The chemical composition of persistent organic pollutants (POPs) in the environment is not uniform throughout the world, and these contaminants contain many structurally different lipophilic compounds. In a well-defined study cohort in the Slovak Republic, the POP chemicals present in the peripheral blood of exposed children were chemically analyzed. The chemical analysis data revealed that the relative concentration and profile of structurally different organic pollutants, including polychlorinated biphenyls (PCBs), 2,2′-bis(4-chlorophenyl)-1,1-dichloroethylene (p,p′-DDE), 2,2′-bis(4-chlorophenyl)-1,1,1-trichloro-ethane (p,p′-DDT), hexachlorobenzene (HCB) and β-hexachlorocyclohexane (β-HCH), may vary from individual to individual, even within the same exposure area. These chemicals can be broadly classified into two groups. The first group, the PCB congeners, primarily originated from industrial compounds and their byproducts. The second group of compounds originated from or was commonly used in the agricultural sector (e.g., DDT, HCB). The objective of this study was to examine the effects of the two POP exposure profiles on gene expression. For the study population, we selected pre-pubertal girls (mean age of 46.2 ± 1.4 months) with high POP concentrations in their blood (> 75% tile of total POP) and classified them in the high ‘PCB’ group when the total PCB concentration was significantly higher than the total concentration of other POP components and in the ‘Other Than PCB’ (OTP) group, when the total PCB concentration was significantly lower than the concentration of the other major POP constituents. A matched control group of girls (< 25% tile of total POP) was selected for comparison purpose (n = 5 per group). Our aims were to determine whether there were any common effects of high POP exposure at a toxicogenomic level and to investigate how exposure may affect physiological functions of the children in two different exposure scenarios. Global gene expression analysis using a microarray (Affymetrix Gene Chip Human genome U133 Plus 2.0 Array) platform was conducted on the total RNA of peripheral blood mononuclear cells from the girls. The results were analyzed by Partek GS, Louis, MI, which identified twelve genes (ATAD2B, BIVM, CD96, CXorf39, CYTH1 ETNK1, FAM13A, HIRA, INO80B, ODG1, RAD23B, and TSGA14) and two unidentified probe sets, as regulated differentially in both the PCB and OTP groups against the control group. The qRT-PCR method was used to validate the microarray results. The Ingenuity Pathway Analysis (IPA) software package identified the possible molecular impairments and disease risks associated with each gene set. Connective tissue disorders, genetic disorders, skeletal muscular disorders and neurological diseases were associated with the 12 common genes. The data therefore identified the potential molecular effects of POP exposure on a genomic level. This report underscores the importance of further study to validate the results in a random population and to evaluate the use of the identified genes as biomarkers for POP exposure.     

Delivering Arsenic-free Drinking Water-Made Practically Possible: Continuous Scale Electrochemical Arsenic Remediation Process Furnished,based on Experimental Studies and ANN Simulation

Environment, Development and Sustainability - Arsenic (As) in groundwater has become a worldwide concern due to its high toxicity as it is classified as a potent carcinogen, when exposed to...     

Evaluating households’ preferences regarding reducing power outages in rural areas: cases in the Ganges Floodplain in Bangladesh

This paper investigates household preferences regarding an improved supply of electricity in rural Bangladesh, where the expansion of stable electricity is an urgent policy issue. The paper examines household preferences regarding reductions in the frequency and duration of power outages. It also examines prior notification mechanisms that do not necessarily provide an increased supply of electricity but that allow households to prepare for potential power failures. A questionnaire survey designed as a choice experiment was applied to households to elicit preferences. The econometric analysis reveals that villagers prefer a reduction in both the frequency and duration of power outages and a 1-day prior notification of power outages. There are slight disparities in preferences according to the season and the timing of improvements (e.g., summer or winter and all day or peak hours). Thus, the present study may be beneficial for policymakers when considering the provision of electricity supply improvements in rural areas in exchange for slight increases in electricity tariffs.     

Study of the biouptake of labeled single-walled carbon nanotubes using fluorescence-based method

Single-wall carbon nanotubes (CNT) are one of the most attractive engineered nanomaterials due to their unique electrical, mechanical and thermal properties, and potential use in a variety of commercial products. Due to their small size, CNT could become easily airborne and reach the various environmental compartments and eventually the food chain and humans. However, the environmental fate processes and health impacts of CNT are not clear. This study investigated a method for the quantitative measurement of carbon nanotube (CNT) in natural media such soil and benthic organism tissues. Fluorescence dye Nile blue was used for noncovalent labeling of CNT to enable their fluorescence detection. Labeled nanotubes were successfully detected in soil samples as well as in worm tissue. We were also able to detect the presence of labeled carbon nanotubes in worms exposed for 1 week to CNT-laden soil, which indicates CNT may transfer through environmental food web. The method allows for laboratory measurements of CNT mass transfer and partitioning into various environmental systems.