Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Mesoporous carbon nanospheres derived from agro-waste as novel antimicrobial agents against gram-negative bacteria

Environmental Science and Pollution Research - Porous carbon nanospheres were synthesized from agro-waste garlic peels by a one-pot facile and easy to scale-up pyrolysis method. Surface morphology...     

Fixed-bed adsorption of Malachite Green onto binary solid mixture of adsorbents: seashells and eggshells

In this work, continuous removal of Malachite Green from aqueous solution by adsorption was investigated using a laboratory scale fixed-bed column packed with binary solid mixture of seashell powder (SSP) and eggshell powder (ESP). The effects of initial dye concentration, feed flow rate, bed height, and the SSP?:?ESP ratio in the binary solid mixture on the breakthrough characteristics were studied. The breakthrough time decreased with increase in the flow rate and the initial dye concentration. The breakthrough time also varied greatly with change in bed height. The breakthrough time increased from 17.2?h to 34.5?h with increase in bed height from 6?cm to 12?cm. The breakthrough time was significantly affected by the change in the SSP?:?ESP ratio in the binary mixture. The breakthrough time decreased with increase in the SSP ratio in the binary mixture. In order to determine the column kinetic parameters, three different column kinetic models, namely Adams–Bohart, Bed Depth Service Time (BDST), and Yoon–Nelson models were fitted to the dynamic flow experimental data. The BDST model showed good agreement with the experimental results at all the process parameters studied. Results suggest that this novel approach of simultaneous utilization of adsorbents can be adopted for the treatment of dye-bearing effluents.     

Oxidation of As（Ⅲ） by potassium permanganate

The oxidation of As（Ⅲ） with potassium permanganate was studied under conditions including pH, initial As（Ⅲ） concentration and dosage of Mn（Ⅶ）. The results have shown that potassium permanganate was an effective agent for oxidation of As（Ⅲ） in a wide pH range. The pH value of tested water was not a significant factor affecting the oxidation of As（Ⅲ） by Mn（Ⅲ）. Although theoretical redox analyses suggest that Mn（Ⅶ） should have better performance in oxidization of As（Ⅲ） within lower pH ranges, the experimental results show that the oxidation efficiencies of As（Ⅲ） under basic and acidic conditions were similar, which may be due to the adsorption of As（Ⅲ） on the Mn（OH）2 and MnO2 resulting from the oxidation of As（Ⅲ）.     

Cogeneration potential in Indian sugar mills: a case study

The Indian sugar industry has massive potential for the cogeneration of electrical power. The sugar manufacturing process generates bagasse as a byproduct from cane-crushing. This bagasse can be used as a fuel for the boilers employed in steam raising for the process use and cogeneration. In this study, the potential for power cogeneration in a typical plant under the existing boiler-turbine configuration has been estimated. An alternative configuration requiring capital investment in machinery has also been studied. The cost of cogenerating power, including the cost of fuel, operations and capital services wherever necessary, has been calculated for both these cases, using a linear optimisation method. The exercise allows for the use of multiple fuels, namely bagasse and coal, for cogeneration throughout the year including the cane-crushing season and the off-season. The per unit supply price of cogenerated power thus computed has been compared with the utility's own cost with a view to selling the surplus cogenerated power to the grid.     

Influence of culture media and environmental factors on mycelial growth and sporulation of Lasiodiplodia theobromae (Pat.) Griffon and Maubl

Lasiodiplodia theobromae, a common tea (Camellia sinensis) pathogen, usually does not sporulate or sporulates poorly in common media, which makes spore production difficult. In this study the effects of culture media, carbon source, nitrogen source, temperature, pH and light on mycelial growth and sporulation were evaluated. Among several carbon sources tested, glucose and sucrose were found superior for growth. Potassium nitrate supplemented media showed maximum growth amongst the tested inorganic nitrogen sources while peptone produced maximum growth among the tested organic nitrogen sources. Tea root extract supplemented potato dextrose agar medium was found to be the most suitable for mycelial growth and sporulation of L. theobromae. The fungus grow at temperatures ranging from 40 to 36 degrees C, with optimum growth at 28 degrees C and no growth was noted at 40 degrees C. There was no significant effect of different light period on growth of L. theobromae, but light enhanced sporulation. The fungus grow at pH 3.0-8.0 and optimum growth was observed at pH 6.0. Tea root extract supplemented potato dextrose agar medium with pH 6.0 was the most suitable for production of conidia of L. theobromae at 28 degrees C. Hence this media may be recommended for inoculum production for further studies.     

Screening of wheat varieties and associated bacterial population in old alluvial soil of Burdwan, West Bengal

In order to screen out the best variety of wheat (Triticum aestivum) out of eight varieties (viz., HP 1633, BW 11, NW 1014, Sonalika, HUW 468, K 9107, HP 1731 and HUW 234), a field experiment was conducted (from Dec. 2002 to April 2003) in a randomized block design replicated thrice at Crop Research and Seed Multiplication Farm, Burdwan University, West Bengal, India. Various morpho physiological parameters viz., plant population, length of shoot and root, leaf area index (LAI), crop growth rate (CGR), leaf area ratio (LAR), leaf area duration (LAD), net assimilation rate (NAR), yield attributes viz., length of panicles, number of grains per panicle, grain yield, straw yield, pigment content in flag leaf (chlorophyll a, b and total chlorophyll and carotenoid content) were estimated and analyzed statistically Soil bacterial populations were also estimated in the fallow land before sowing of seeds and after harvesting of crop. The HUW 468 variety records higher grain yield, maximum panicle length and maximum chlorophyll b and total chlorophyll content.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

Stability of pentobarbital in soil

Intravenous injection of barbiturates, particularly pentobarbital (5-ethyl-5-pentan-2-yl-1,3-diazinane-2,4,5-trione), is a widely used method to euthanize large animals such as horses. However, one concern with this method is the fate of pentobarbital after the disposal of the carcass. As tissues decompose, pentobarbital may leach into the soil and from there migrate to groundwater. A method using methanol extraction, solid phase concentration, and liquid chromatography (LC/MS) has been developed to measure pentobarbital in soils. Recovery of pentobarbital from soil averaged approximately 85% from different soil types including topsoil, potting soil, sand, stall sweepings, and loam. The method was capable of detecting pentobarbital levels of 0.1 ppm. A calibration curve was constructed with a linear range of 1 ppm to 100 ppm. The limit of quantification was 0.5 ppm. The rate of degradation of pentobarbital in sand, topsoil, and potting soil was measured over a 17-week period. At the end of week 17, approximately 17% of the pentobarbital remained in the sand, 19% remained in the topsoil, and 10% remained in the potting soil. While there was a significant decrease in the pentobarbital recovered from the soil, there were still detectable amounts of pentobarbital present in the soil after 17 weeks. To determine the importance of bacterial degradation, the three soil types were autoclaved before addition of pentobarbital. After autoclaving, no degradation of pentobarbital was observed in sand and one topsoil sample, while there was no difference in the degradation of pentobarbital in autoclaved potting soil versus potting soil that had not undergone autoclaving.