Improvement of the antifouling characteristics in a bioreactor of polypropylene microporous membrane by the adsorption of Tween 20

Surface modification by physical adsorption of Tween 20 was accomplished on polypropylene microporous membranes (PPMMs). Attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FT-IR) and scanning electron microscope (SEM) were used to characterize the chemical and morphological changes on the membrane surfaces. Water contact angles and relative pure water fluxes were measured. The data showed that the hydrophilic performance for the modified membranes increased with the increase in the adsorption amount of Tween 20 onto the surface or into the pores of polypropylene microporous membranes. To test the antifouling property of the membranes by the adsorption of Tween 20 in a membrane bioreactor (MBR), filtration for active sludge was performed using synthetic wastewater. With the help of the data of water fluxes and the FE-SEM photos of the modified PPMMs before or after operating in a MBR for about 12 d, the PPMMs with monolayer adsorption of Tween 20 showed higher remained flux and stronger antifouling ability than unmodified membrane and other modification membranes studied.     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.     

风能资源评估系统开发与应用

开发风能资源、利用风力发电在我国虽然只有数十年，但其发展却很快，风能作为可再生的清洁能源也越来越受到重视。风能资源评估作为风电资源开发的前提，是风力机选址的关键。介绍了以Visual Basic为开发工具，利用SQL Server为数据库开发而成的风能资源评估系统的结构和特点。经实践证明，本系统缩短了风能资源评价周期，提高了数据处理可靠性。     

九龙江流域水体有机污染物背景调查方法

阐述了九龙江流域水体有机污染物背景调查的重要性和必要性,比较详细地论述了调查方案的制定方法、分析方法的确立、监测过程中的质量控制和质量保证措施等。     

广州市32种水产品的Se含量特征分析

通过酸消解,原子荧光-氢化物发生法测定了广州市部分市售水产品中Se的含量,由标准物质(GBW 08551猪肝)和回收率控制检测质量.结果表明,不同水产品中Se含量有较大差异,含量范围为(34.-1117.)×10-9,平均含量为(345.±149.)×10-9,不同类型水产品中Se含量变化特征是:甲壳类(544.±107.)×10-9＞海水鱼类(392.±86.)×10-9＞软体类(244.±89.)×10-9＞淡水鱼类(238.±97.)×10-9.     

云南白秧坪铜银矿床Cu、Ag迁移形式探讨

在野外地质研究的基础上,采用地球化学热力学方法研究了Cu、Ag的迁移形式。研究结果表明,铜在热液中主要以CuCl42-、Cu(H2O)42+、Cu(S2O3)46-、CuS46-、Cu(HS)42-、Cu(SbS3)410-形式迁移;银在热液中主要以AgCl2-、Ag(S2O3)23-、Ag(HS)2-、AgS23-、Ag(SbS3)25-形式迁移。铜银矿床是在含矿热液物理化学条件发生改变的情况下铜银化合物发生解析作用而成。     

剩余污泥的电化学稳定实验研究

研究了电化学法对城市剩余污泥稳定化的影响。结果表明,以钛涂钌电极为阳极、不锈钢板为阴极,在极板间距为2cm,电压为20V,曝气量为3L/h的条件下,电解20min,其挥发性悬浮物质(VSS)去除效率可达39%,加酸调节pH值至4左右时,其电解效率则可达40%以上,同时,污泥病原体达到未检出水平。     

利用粉煤灰处理造纸中段废水的实验研究

采用保定热电厂粉煤灰处理某小型造纸厂中段废水,考察了粉煤灰处理造纸中段废水的效果,结果表明废水pH值为12、灰水接触时间为2h、原水COD(浓度为1200mg/L)稀释3、水灰比15:1、粉煤灰粒径71～100μm,粉煤灰含碳量为15%时,造纸中段废水中COD的去除率可达到76.2%～89.7%.     

超滤处理含聚污水过程中通量衰减机理的研究

研究了超滤处理含聚合物污水过程中操作压力、膜面流速、聚合物浓度、料液流变性、阻力等影响因素对膜通量的影响,并进行理论分析,揭示了通量衰减机理.研究结果表明,通量衰减的机理是聚合物的浓差极化和凝胶层的形成,其次是原油和无机物对膜孔的堵塞.     

关注全球气候变化,提高抵御气候灾害的能力

我国是个受全球季风气候影响较大的国家。受全球气候变暖的影响,云南梅里雪山的明永冰川已发生后退现象,西双版纳也已出现一些变化的前兆。为维护生态安全,云南省应统筹好人与自然和谐相处的关系,防止人为决策失误造成的区域性生态系统结构的破坏,同时要加强有关气候变化对云南影响的预警研究。