气体中毒窒息事故的环境应急监测

以株洲市攸县某矿业公司"5·7"重大中毒窒息事故的环境应急监测为例，详细阐述了该事故开展应急监测的全过程。针对锁定污染因子、查找污染源、判断污染团的扩散趋势以及监控敏感点的安全等监测目的设计监测方案。通过监测数据分析确定事故特征因子为CO，其周边环境空气中浓度随着与抽风口距离的增加而快速下降，监测到附近居民区环境空气质量未受事故影响。     

大气环境质量综合评价加权灰色关联模型的建立与应用

利用灰色理论建立大气环境质量综合评价加权灰色关联模型 ,运用污染贡献率确定权重系数。与其它评价模型相比 ,加权灰色关联模型还具有排序功能 ,实例表明该模型是简便有效的     

土壤石油类(红外法)标样制作方法的研究

对我国环境监测用于土壤矿物油污染监测所必备的标准样品制作方法作了探索,尤其对该类标样的液-固态吸附饱和及其浓度平衡关系作了探讨,从理论上保证标样的均匀性和稳定性,为标样最后的定值分析提供依据.     

不同区域城市空气O3和PM2.5累积速率时序模型

利用2017—2018年全国7个区域10个典型城市环境空气O₃和PM_2.5浓度数据，统计污染物累积速率，进而采用回归方法拟合污染物浓度及其累积速率的时间序列模型，分析不同区域污染物时序变化特征差异。结果表明：不同区域O₃浓度时序曲线拟合程度总体高于PM_2.5，石家庄O₃拟合程度最高，西安PM_2.5拟合程度最高。以07：00、14：00分别作为O₃、PM_2.5模拟起点是24 h中的最优模型。不同城市夏季O₃小时浓度时序变化曲线均为单峰形态，O₃浓度及累积速率峰值出现时间可能由城市所处经度决定，太原O₃累积最快，西安O₃消解最快。各城市间冬季PM_2.5小时浓度及其累积速率时序变化曲线形态差异较大，沈阳PM_2.5累积和消解均最快。与浓度相比，城市环境空气O₃和PM_2.5累积速率与光照、扩散条件等有更好的时间相关性。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

乌鲁木齐市餐饮业油烟污染的调查及防治初探

通过对乌鲁木齐市20家餐饮业油烟污染的调查分析，结果表明，乌鲁木齐市餐饮业油烟污染严重，并提出了防治措施。     

南水北调东平湖水质变化趋势分析研究

采用了季节性肯达尔法水质趋势分析方法,分析了1984～2000年东平湖水质的变化情况,目前东平湖水质一般为Ⅴ类、Ⅵ类,个别年份为超Ⅴ类,氨氮平均值历年变化不大,一般均符合Ⅰ Ⅲ类水质,挥发酚和砷含量甚小,各年均符合Ⅰ类水。     

深圳市几种空气污染物浓度日变化特征分析

通过对深圳市2002年8月至2003年8月五种空气污染物浓度日变化特征、相互关系及不同天气条件下的变化,与人们活动的关系等进行分析,试图找出深圳空气污染的主要成因及变化规律,为环境规划决策提供科学依据。     

固定化微生物处理有机污染物的研究进展

综述了近年来固定化微生物技术用于有机污染物治理中的最新进展，这些有机污染物包括难降解有机污染物（酚类、芳香烃类等）及其它化合物（DMP、甲硫醇恶臭气体、制药废水等）。此外，对藻类固定化技术作了简介，并对固定化技术的应用前景及存在问题进行了评述。     

毛细管气相色谱法测定烟草中有机氯农药残留

研究了烟草中六六六及滴滴涕异构体含量的气相色谱分析方法.样品以石油醚 丙酮在索氏提取器中提取,提取液以浓硫酸净化.采用DB-5弹性石英毛细管柱分离样品,GC-ECD检测农药六六六、滴滴涕的残留量.方法的线性范围为2.27×10-13～7.66×10-11g;最小检测量为1.3×10-8～3.0×10-7 μg,加标平均回收率为95.3%～103.3%,RSD为2.8%～4.5%.