Immune response of earthworms (Lumbricus terrestris, Eisenia andrei and Aporrectodea tuberculata) following in situ soil exposure to atmospheric deposition from a cement factory

In order to reduce their energy costs, many cement plants use fuel product substitutes (old tyres and used oil). The combustion of these products generates a metal increase (e.g. Cu, Cd, Pb and Zn) in the atmospheric emissions. After their release, these elements are deposited into the environment and could eventually accumulate up to concentrations of concern. At the Saint-Laurent cement factory (Joliette, QC, Canada), maximum deposition of these elements occurs in the direction of prevailing winds (North-East). We evaluated the potential impact of these depositions upon the immune system of three earthworm species (Lumbricus terrestris, Eisenia andrei and Aporrectodea tuberculata) exposed in a natural environment. The exposure sites were 0.5, 1.0, and 2.0 km downwind from the cement factory, along with an upwind reference site. The immune parameters studied were the cell viability and phagocytic potential of the immune cells (coelomocytes). For both L. terrestris and E. andrei, after 7 d exposure, none of the measured parameters showed significant differences among the sites. On the other hand, for the indigenous worm A. tuberculata, in the most exposed zone (at 0.5 km), we observed an increase in cell viability and phagocytic potential. This increase could possibly be attributed to physicochemical effects such as the alkaline pH of the soil, or alternatively, it could result from beneficial effects induced by an increased calcium supply.     

Stratospheric temperature monitoring using a vibrational Raman lidar. Part 1: aerosols and ozone interferences

Lidar measurements of temperature for the upper troposphere and lower stratosphere are commonly derived by the Raman technique. Lidar signals derived from vibrational Raman processes have been subjected to numerous simulation tests to examine their sensitivity to the presence of aerosols and ozone in the atmosphere. The influence of aerosols characteristics (wavelength dependence of aerosol extinction and particle phase function) and of ozone concentration on Raman temperature profiles is estimated. Simulations indicate large temperature deviations for post-volcanic conditions. For a Raman backscatter at 607 nm, bias is below 1 K for a total optical depth less than 9 x 10(-3) in the case of a stratospheric contamination and less than 6 x 10(-3) for a tropospheric contamination. The effect of aerosols depends on phase function and a few parameters such as altitude, optical depth and the shape of the high-altitude cloud. The wavelength dependence of aerosol extinction has some influence only for severe post-volcanic conditions (Scattering Ratio, SR >2). For a Raman backscatter at 387 nm, bias is larger and can be significant even in background aerosol conditions. Changes in the ozone density profile lead to significant Raman temperature deviations only for some specific conditions. Results suggest that both aerosol and ozone corrections are necessary to obtain an accuracy better than the 1 K requested for most atmospheric applications.     

New Multi-Scale Hybrid System Based on Maple Wood Flour and Nano Crystalline Cellulose: Morphological,Mechanical and Physical Study

In the first part of this work, composites based on polypropylene (PP) and maple wood flour (MF) were prepared by melt compounding using twin-screw extrusion followed by compression molding. The morphological and mechanical properties of the composites were analyzed for three samples: PP, MF/PP and MF/PP containing maleic anhydride grafted polypropylene (MAPP) as coupling agent. The results showed that MF/PP composites have improved mechanical properties, especially tensile modulus (+33 %), with only 8 % increase in density. The addition of MAPP further improved the mechanical properties, in particular tensile modulus (up to 51 %), which could be related to better fiber/matrix adhesion. In the second step, nano crystalline cellulose (NCC) was added to all samples to produce NCC-MF/PP hybrid composites. From the mechanical analysis performed, the hybrid composites with MAPP have improved properties, especially tensile (+53 %) and flexural (+40 %) moduli. These results confirmed that multi-scale hybrid NCC-MF composites can substantially improve the mechanical properties of polyolefins with limited increase in density (14 %) leading to high specific properties.     

Are rapid population estimates accurate? A field trial of two different assessment methods

Emergencies resulting in large-scale displacement often lead to populations resettling in areas where basic health services and sanitation are unavailable. To plan relief-related activities quickly, rapid population size estimates are needed. The currently recommended Quadrat method estimates total population by extrapolating the average population size living in square blocks of known area to the total site surface. An alternative approach, the T-Square, provides a population estimate based on analysis of the spatial distribution of housing units taken throughout a site. We field tested both methods and validated the results against a census in Esturro Bairro, Beira, Mozambique. Compared to the census (population: 9,479), the T-Square yielded a better population estimate (9,523) than the Quadrat method (7,681; 95% confidence interval: 6,160-9,201), but was more difficult for field survey teams to implement. Although applicable only to similar sites, several general conclusions can be drawn for emergency planning.     

Impacts of quarrying activities on the environment and livelihood of people in Border II sub-location,Nyando sub-county,Kisumu County,Kenya

The aim of the study was to assess the impacts of quarrying activities on the environment and livelihood of people in the Border II sub-location. Primary data was collected through questionnaires, Key Informant Interviews, Focus Group Discussion, laboratory analysis and observations. Whereas, secondary data was obtained from Landsat satellite images, journals, articles, books and reports. The acquired data were analyzed using excel and Arc GIS; and presented into tables and figures. The Land use/cover change analysis from the satellite images of the area showed that quarry lands have increased by 5.2 Ha (0.26%). Quarrying activities in the area were perceived to have both positive and negative impacts on the livelihood of people and the environment. Some of the most serious environmental problems were; dust pollution (82%), noise (76%), land degradation (74%), vegetation loss (60%) and vibration (52%). Whereas, negative socioeconomic impacts were; building cracks (54%), injuries (36%), school dropouts (35%), roads damages (33%), child labor (31%) and crop effects (30%). Moreover, 45% of the area residents and 44% of the quarry workers have experienced health problems related to quarrying activities. Nevertheless, there was a significant relationship between quarrying activities and the environmental as well as human health problems in the area (p<0.05). The positive impacts identified are; employment, roads improvement, security, CSR, building materials, business opportunities, among others. To mitigate the negative impacts, the quarry operators should develop and implement an Environmental and Social management Plan, including fair compensation of the project which affect a person, relocation of near homes, environmental pollution control, public participation, scaling down blasting activities, and strict policies compliance and enforcement.     

A SIPHON GAGE FOR MONITORING SURFACE-WATER LEVELS1

A device that uses a siphon tube to establish a hydraulic connection between the bottom of an onshore standpipe and a point at the bottom of a water body was designed and tested for monitoring surface-water levels. Water is added to the standpipe to a level sufficient to drive a complete slug of water through the siphoning tube and to flush all air out of the system. The water levels in the standpipe and the water body equilibrate and provide a measurable static water surface in the standpipe. The siphon gage was designed to allow quick and accurate year-round measurements with minimal maintenance. Currently available devices for monitoring surface-water levels commonly involve time-consuming and costly installation and surveying, and the movement of reference points and the presence of ice cover in cold regions cause discontinuity and inaccuracy in the data collected. Installation and field testing of a siphon gage using 0.75-in-diameter polyethylene tubing at Ashumet Pond in Falmouth, Massachusetts, demonstrated that the siphon gage can provide long-term data with a field effort and accuracy equivalent to measurement of ground-water levels at an observation well.     

Decontamination of Fly Ash and Used Lime from Municipal Waste Incinerator Using Thiobacillus ferrooxidans

Thiobacillus ferrooxidans to leach metals from APCR to render them nonhazardous. The multistage solubilization process involves an alkaline aqueous phase that removes some Pb. In the second phase, the APCR are acidified to pH 4 with H₂SO₄, then inoculated with a bacterial culture that has been acclimated in the presence of 2% Fe (FeCl₃). Several rinses and decantings achieve removal of the leachable metals. The final step involves the addition of Ca(H₂PO₄)₂ and an increase in the treatment pH prior to the final filtration. Viability of thiobacilli in APCR was poor. Despite this problem, the removal of Pb was 35.9%, 46.0%, and 68.7% (for APCR containing 1594, 3026, and 5038 mg Pb/kg, respectively), which demonstrates greater metal removal with increased APCR contamination. Zn removal varied from 68.2% (8273 mg Zn/kg APCR) to 79.5% (16,873 mg Zn/kg APCR), which was positively correlated to the level of residue contamination, whereas Cu was removed in the proportions of 26.9% (495 mg Cu/kg APCR) to 68.2% (465 mg Cu/kg APCR). Cadmium removal appeared to be independent of the level of Cd in the APCR; Cd was removed to the greatest degree, with a variation of 92.0% (129 mg Cd/kg APCR) to 94.7% (267 mg Cd/kg APCR). The treated APCR were tested using four different leachate tests. The APCR released 43 mg Pb/liter during contact with water, and 7.40 mg Cd/liter during TCLP [the toxicity characterization leaching procedure of the United States Environmental Protection Agency (US EPA)]. After biological treatment, the leachate from TCLP was within the acceptance criteria of the US EPA, if the pH of the APCR was increased to pH 5 after the biological treatment. In the case of the Transport Canada leaching test, a betterment of the process is required in order to satisfy the stringent regulatory level of 0.5 mg Cd/liter (0.68 and 0.57 mg/liter).     

Ecological risk assessment of metal and hydrocarbon pollution in sediments from an urban tropical estuary: Tijuca lagoon (Rio de Janeiro,Brazil)

Environmental Science and Pollution Research - Urban tropical lagoons are often impacted by eutrophication, metal, and polycyclic aromatic hydrocarbon (PAH) contamination, but the toxicity of their...     

Indigenous capacity for collaboration in Canada’s energy,forestry and mining sectors: research metrics and trends

This paper examines patterns in recently published research addressing Indigenous capacity for collaborative natural resource development in Canada’s forestry, energy, and mining sectors. As Indigenous involvement in natural resource development increases, so too does the body of associated scholarship. We gathered information on several core metrics (year of publication, authorship, and gender, author affiliation, journal titles, citation counts and impacts factors, and keywords) to analyze research output, trends, and gaps. Our bibliometric analysis of 49 articles from peer-reviewed journals confirms that Indigenous natural resource development and capacity research has steadily increased over the past decade in terms of the number and range of papers, authors, institutions, and cases examined. Research output peaked in 2013 and 2015. Authorship is distributed evenly between male and female lead researchers, with teams located across southern Canada, with highest concentrations in urban population centers of British Columbia, Manitoba, and Ontario. In contrast, the research sites are located in more northern, rural, and remote locations. That communities and projects under study are not currently matched with sites of research capacity raises questions about capacity building and the nature of research “on” versus “with” Indigenous peoples. Policies and programs designed to enhance Indigenous involvement and capacity must address these asymmetries in order to be representative, effective, and responsive to current Indigenous priorities.     

Observation Procedures Characterizing Occupational Physical Activities: Critical Review

The first objective of this paper is to compare the observation procedures proposed to characterize physical work. The second objective is to examine the following 3 methodological issues: reliability, observer training, and internal validity. Seventy-two papers were reviewed, 38 of which proposed a new or modified observation grid. The observation variables identified were broken down into 7 categories as follows: posture, exertion, load handled, work environment, use of feet, use of hands, and activities or tasks performed. The review revealed the variability of existing procedures. The examination of methodological issues showed that observation data can be reliable and can present an adequate internal validity. However, little information about the conditions necessary to achieve good reliability was available.