Electrochemical degradation of chlorophenoxy and chlorobenzoic herbicides in acidic aqueous medium by the peroxi-coagulation method

The degradation of 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) as chlorophenoxy herbicides, as well as of 3,6-dichloro-2-methoxybenzoic acid (dicamba) as chlorobenzoic herbicide, has been studied by peroxi-coagulation. This electrochemical method yields a very effective depollution of all compounds in acidic aqueous medium of pH 3.0 working under pH regulation, since they are oxidized with hydroxyl radicals produced from Fenton's reaction between Fe(2+) and H(2)O(2) generated by the corresponding Fe anode and O(2)-diffusion cathode. Their products can then be removed by mineralization or coagulation with the Fe(OH)(3) precipitate formed. Both degradative paths compete at low currents, but coagulation predominates at high currents. The peroxi-coagulation process of dicamba at I>or=300 mA leads to more than 90% of coagulation, being much more efficient than its comparative electro-Fenton treatment with a Pt anode and 1 mM Fe(2+), where only mineralization takes place. For the chlorophenoxy compounds, electro-Fenton gives a slightly lower depollution than peroxi-coagulation, because more easily oxidable products are produced. Oxidation of chlorinated products during peroxi-coagulation is accompanied by the release of chloride ion to the solution. The efficiency of this method decreases with increasing electrolysis time and current. The decay of all herbicides follows a pseudo-first-order reaction, with a similar constant rate for 4-CPA, MCPA, 2,4-D and 2,4,5-T, and a higher value for dicamba.     

Metal equilibration in laboratory-contaminated (spiked) sediments used for the development of whole-sediment toxicity tests

The equilibration and bioavailability of metals in laboratory-contaminated sediments have been investigated in order to provide better guidance on acceptable procedures for spiking sediments with metals for use in the development of whole-sediment toxicity tests. The equilibration rates of Cd, Cu, Ni and Zn spiked into three estuarine surface sediments with varying properties were investigated. Changes to sediment pH, redox potential, porewater and acid-soluble metals, acid-volatile sulfide and bacterial activity during equilibration, effects of temperature and disturbances following equilibration are reported. The addition of metals to sediments caused major decreases in pH and increases in redox potential as metals displaced iron(II) into the porewaters and added metals and iron (following oxidation) were hydrolyzed. The rates of equilibration of metals in porewaters varied considerably and were dependent on sediment and metal properties. For the oxic/sub-oxic sediments studied, metal-spikes of Cd, Cu, Ni and Zn appeared near equilibrium after 25-45, 10-15, 30-70 and 20-40 days, respectively. Acid-soluble metal concentrations decreased during the equilibration period indicating that the metals become more strongly associated with the sediments with time (less bioavailable). Bacterial activity was greatest in the sediment equilibrated at pH 7 and decreased following the addition of metals. During the equilibration period, bacterial activity increased in sediments equilibrated at pH 6, remained low in sediments at pH 8 and varied erratically in sediments at pH 7. Spiked sediments were shown to equilibrate more slowly at lower temperatures resulting in high porewater metal concentrations. Disturbances to equilibrated sediments because of sample manipulation caused significant iron(II) oxidation and losses of metals from porewaters. The importance of documenting spiking and equilibration procedures and carefully measuring and reporting sediment parameters is highlighted so that contaminant bioavailability and exposure pathways can be interpreted and organism sensitivity accurately determined. Recommendations are given for the preparation of metal-spiked sediments for toxicity testing purposes.     

Change in Fish Fauna as Indication of Aquatic Ecosystem Condition in Río Grande de Morelia–Lago de Cuitzeo Basin, Mexico

Chirostoma charari and C. compressum, and they are presumed extinct. Twelve (63%) of the remaining species had declines in distribution. Sixteen (80%) of the 20 localities sampled had lost species. The greatest declines occurred in Lago de Cuitzeo proper and in the lower portion of the Río Grande de Morelia watershed. Species losses from the lake were attributable to drying and hypereutrophication of the lake because of substantial reductions in the amount and quality of tributary inputs, whereas losses from the Río Grande de Morelia watershed were the result of pollution from agricultural, municipal, and industrial sources, especially in the region around the city of Morelia. Three localities in the upper portion of the Río Grande de Morelia watershed—Cointzio reservoir, La Mintzita spring, and Insurgente Morelos stream—contained most of the remaining fish species diversity in the basin and deserve additional protection. Fish faunal changes indicated major declines in the health of aquatic ecosystems in the Morelia–Cuitzeo basin.     

Failure rate evaluation with influencing factors

A new methodology for failure rate evaluation with influencing factors is proposed. A quantitative part allows integrating potential available data from feedback. Then, a qualitative analysis deals with influencing factors such as design, environment, and use to provide more coherent and argued results. The main idea is to use some criteria to fix the failure rate within a prior interval, according to the influencing factor states. To this end, the system is broken up into main component groups. When a component group is susceptible to an influencing factor, its baseline failure rate is multiplied by the relevant influencing coefficient. A seven-step methodology is presented to define the model, identify and rate the influencing factors, set indicator functions taking the uncertainties into account, and calculate the influencing coefficients. The proposed methodology is global enough to be usable for a large number of safety instrumented systems and influencing factors. For example, an application regarding safety pressure relief valves is given. The prospect is for more efficient risk management by acting both on systems and influencing factors.     

Physico-chemical characterization of Residual Household Waste for energy recovery in insular territories: Case study of Reunion Island

Waste-to-energy is a promising approach to face the current challenge of waste overproduction in Reunion Island, a French territory. In this particular context of an isolated and tropical territory, it is essential to study the properties of potential feedstocks to choose the most appropriate conversion process. This article reports on the composition of Residual Household Waste from Reunion Island and its physico-chemical parameters. Twelve representative samples of Residual Household Waste were subjected to thermal and elemental analysis. The results showed that their composition had a significant influence on the physico-chemical properties, including calorific value. Residual Household Waste from the selective sorting (rich in wood, plastic, and sanitary textiles) as well as dry mixed RHW are the most interesting for energy recovery. Due to their high volatile matter and high carbon content, and their low moisture content, these types of waste have a high calorific value exceeding 18 MJ/kg. Furthermore, the RHW sample comply with the environmental and health criteria applied by French regulations concerning halogen and heavy metal. Thus, it seems that Residual Household Waste can be an alternative to conventional fuels used in incineration or pyro-gasification processes. However, the study also points the need for a pre-treatment process for these wastes. Indeed, it is necessary to sort them correctly in order to avoid the risks of pollution and important maintenance. And more importantly, drying beforehand is unavoidable to improve combustibility and obtain optimal energy conversion.     

Application of lead isotopic methods to the study of the anthropogenic lead provenance in Spanish overbank floodplain deposits

Changes in the principal sources of Pb in overbank sediment profiles have been documented for two Spanish areas by using Pb isotopes and Pb concentrations. These locations (Madrid and Tinto–Odiel basin) represent two of the most contaminated regions in Spain. The Community of Madrid is characterized by heavy industrial and urban activity, focused mainly in Madrid City. The Tinto–Odiel basin drains the Iberian Pyrite Belt, which hosts many polymetallic massive sulphides and is heavily affected by mining activities in their headwaters. It has been proven that the influence of anthropogenic activity is reflected in these overbank deposits by variations in Pb concentrations that, in general, correlate with shifts in the ²⁰⁶Pb/²⁰⁷Pb ratio. Rivas profile (downstream of Madrid) was found to be the most anthropogenically influenced site. The sediments within this profile which were recently deposited (170 ± 40 years BP) have the least radiogenic signatures. ²⁰⁶Pb/²⁰⁷Pb ratios ranged between 1.1763 and 1.1876 indicating significant contributions of anthropogenic Pb. In contrast, profiles upstream of Madrid possess an average ²⁰⁶Pb/²⁰⁷Pb ratio of 1.2272. It is difficult to clearly identify the most prominent source as the sediments appear to be characterized by an input from several sources. The floodplain profiles in the Tinto–Odiel basin exhibit uniform ²⁰⁶Pb/²⁰⁷Pb ratios ranging from 1.1627 (Odiel river) to 1.1665 (Tinto river). These ratios are similar to the ones possessed by sulphide ores in the area and differ from the ratios of other nonmineralized formations in the basin, indicating that mining activities are the primary, if not sole, source of Pb to the sediments.     

Ecological niche segregation among five toothed whale species off the NW Iberian Peninsula using ecological tracers as multi-approach

This study aims to assess niche segregation among the five main toothed whales that frequent the NW Iberian Peninsula waters: the common dolphin, the harbour porpoise, the bottlenose dolphin, the striped dolphin and the long-finned pilot whale. We used cadmium (Cd) and stable isotope ratios (δ¹³C and δ¹⁵N) as ecological tracers to assess degree of segregation in diet/trophic level and in foraging habitat, over various time-scales. δ¹³C values highlighted different habitats, while Cd concentrations highlighted feeding differences between oceanic and neritic species. Moreover, δ¹⁵N values suggest different trophic levels of prey targeted within oceanic and neritic species. Hence, results revealed long-term ecological segregation among five toothed whales that coexist in the NWIP and demonstrated the ability of ecological tracers to discriminate ecological niches among closely related species.     

Activity patterns and predatory behavior of an intertidal nemertean from rocky shores: Prosorhochmus nelsoni (Hoplonemertea) from the Southeast Pacific

Understanding the impact of environmental stressors on predator activity is a prerequisite to understanding the underlying mechanisms shaping community structure. The nemertean Prosorhochmus nelsoni is a common predator in the mid-intertidal zone on rocky shores along the Chilean coast, where it can reach very high abundances (up to 260 ind m⁻²) in algal turfs, algal crusts, barnacle crusts, and mixed substrata. Tidal and diurnal scans revealed that the activity of P. nelsoni is primarily restricted to night and early-morning low tides and is relatively low when air temperatures are high. On average, larger worms crawled faster than smaller worms, with their maximum velocity being influenced by substratum type. Their estimated rate of predation is 0.092 prey items nemertean⁻¹ day⁻¹, just below the laboratory rate of ~0.2 amphipods nemertean⁻¹ day⁻¹ previously estimated for this species. P. nelsoni consumes a diverse spectrum of prey items (i.e., amphipods, isopods, decapods, barnacles, and dipterans) and is possibly exerting a significant influence on its prey populations. We suggest that the opportunistic predatory behavior of this intertidal predator is caused by the trade-off between immediate persistence (e.g., avoidance of desiccation) and long-term survival through successful foraging.     

Influence of a dominant consumer species reverses at increased diversity

Theory and experiments indicate that changes in consumer diversity affect benthic community structure and ecosystem functioning. Although the effects of consumer diversity have been tested in the laboratory and the field, little is known about effects of consumer diversity in the subtidal zone, one of the largest marine habitats. We investigated the grazing effects of sea urchins on algal abundance and benthic community structure in a natural subtidal habitat of the Galápagos Islands. Three species of urchins (Eucidaris, Lytechinus, and Tripneustes) were manipulated in inclusion cages following a replacement design with three levels of species richness (one, two, and three species) with all possible two-species urchin combinations. Identity was the main factor accounting for changes in the percentage of substrate grazed and benthic community structure. Two out of the three two-species assemblages grazed more than expected, suggesting a richness effect, but analyses revealed that this increased grazing was due to a sampling effect of the largest and commercially valued urchin species, Tripneustes. Benthic community structure in treatments with Eucidaris, Lytechinus, and Tripneustes alone was significantly different at the end of the experiment, suggesting that resource use differentiation occurred. Communities in Tripneustes enclosures were characterized by abundant crustose coralline algae and grazed substrate, while those without it contained abundant green foliose algae (Ulva sp.). An unexpected emergent property of the system was that the most species-rich urchin assemblage underyielded, grazing less than any other assemblage with Tripneustes, effectively reversing its dominant influence observed in the two-species treatments. While further experiments are needed to discern the mechanisms of underyielding, it may be related to changing interspecific interactions as richness increases from two to three species or to density-dependent Tripneustes grazing. This study highlights the general importance of evaluating consumer richness effects across the entire range of species richness considered, as the performance of the most species-rich consumer assemblage could not be predicted by manipulations of intermediate levels of consumer species richness.