Management of MSW in Spain and recovery of packaging steel scrap

Packaging steel is more advantageously recovered and recycled than other packaging material due to its magnetic properties. The steel used for packaging is of high quality, and post-consumer waste therefore produces high-grade ferrous scrap. Recycling is thus an important issue for reducing raw material consumption, including iron ore, coal and energy. Household refuse management consists of collection/disposal, transport, and processing and treatment - incineration and composting being the most widely used methods in Spain. Total Spanish MSW production exceeds 21 million tons per year, of which 28.1% and 6.2% are treated in compost and incineration plants, respectively. This paper presents a comprehensive study of incineration and compost plants in Spain, including a review of the different processes and technologies employed and the characteristics and quality of the recovered ferrous scrap. Of the total amount of packaging steel scrap recovered from MSW, 38% comes from compost plants and 14% from incineration plants. Ferrous scrap from incineration plants presents a high degree of chemical alteration as a consequence of the thermal process to which the MSW is subjected, particularly the conditions in which the slag is cooled, and accordingly its quality diminishes. Fragmentation and magnetic separation processes produce an enhancement of the scrap quality. Ferrous scrap from compost plants has a high tin content, which negatively affects its recycling. Cleaning and detinning processes are required prior to recycling.     

电化学间接氧化法处理H2S气体的研究

采用填料塔对铁盐溶液吸收H2S 的过程进行了初步研究,考察了气液比、填料层高度、吸收温度、Fe^3 浓度,进气H2S浓度和H^ 浓度等因素对H2S去除率的影响。结果表明,气液比、 填料层高度和吸收温度对吸收效率的影响比较显著。通过正交试验选出最佳工艺条件,在此工艺条件下H2S的去除率 接近100％。     

Sorption of Some Rare Earth Elements from Acidic Solution onto Poly(acrylic acid–co-acrylamide/16, 16-dimethylheptadecan-1-amine) Composite

Journal of Polymers and the Environment - In this study, Acrylic acid (AA), acrylamide (AM), and 16,16-dimethylheptadecan-1-amine (PJM-T) were copolymerized using gamma irradiation with 60Co...     

Architects' perspectives on construction waste reduction by design

The construction, demolition and excavation waste arising in England was estimated at 91 million tonnes in 2003. The current thinking on construction waste minimisation is heavily focussed on several issues relating to physical construction waste and recycling guides. Indeed, much had been published on ways to improve on-site waste management and recycling activities but very few attempts made to address the effect of design practices on waste generation. However, there is a consensus in the literature that the architect has a decisive role to play in helping to reduce waste by focussing on designing out waste. This paper examines previous studies on architects' approach towards construction waste minimisation; and by means of a postal questionnaire, investigates: the origins of waste; waste minimisation design practices in the UK; and responsibilities and barriers within the UK architectural profession. The findings reveal that waste management is not a priority in the design process. Additionally, the architects seemed to take the view that waste is mainly produced during site operations and rarely generated during the design stages; however, about one-third of construction waste could essentially arise from design decisions. Results also indicate that a number of constraints, namely: lack of interest from clients; attitudes towards waste minimisation; and training all act as disincentives to a proactive and sustainable implementation of waste reduction strategies during the design process.     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Synthesizing alternative sequences via a P-graph-based approach in azeotropic distillation systems

The present work proposes a P-graph based approach capable of systematically generating all combinatorially feasible alternative sequences for both continuous and batch azeotropic distillation systems when the feeds, products, and operating units and their concomitant intermediate materials are known. To facilitate synthesis, a highly effective method has been established to identify processing or operating units necessary for constructing azeotropic-distillation systems by means of first principles and logical sequencing of such units. The materials represented in the space of the residue curve map are partitioned into lumped materials bounded by thermodynamic boundaries and pinches, e.g. distillation boundaries and liquid–liquid phase equilibrium envelope. Subsequently, the operating units are identified on the basis of these lumped materials. The proposed approach automatically discards the operating units and intermediates whose inclusion will lead to infeasible sequences. The efficacy of the approach is illustrated with a realistic example.     

Screening method for locating groundwater monitoring wells

The traditional approach to characterizing the extent of groundwater contamination is often phased over a period of several years. A screening method has been developed that allows the investigation process to be reduced to a single phase. Existing data are used to develop a preliminary estimate of the extent of contamination, which is refined by the screening method using groundwater data collected and analyzed in the field. The screening method is applicable at sites with volatile organic compound contamination. Groundwater samples are collected using direct push or drill rig assisted methods, and the groundwater headspace gas is analyzed for the contaminant of interest. The refined estimate is used to locate all of the groundwater monitoring wells necessary to finalize the estimate of the extent of contamination. Therefore, only one investigation phase is required, and time and cost savings are realized with respect to the traditional multiphase approach. The screening method was successfully applied at a CERCLA site in Nebraska with two distinct plumes of TCE-contaminated groundwater. The Nebraska remedial investigation was completed approximately 18 months earlier than the estimated completion of a comparable phased investigation, with a corresponding cost reduction estimated at approximately 10 percent. If data from the screening method were used instead of data from monitoring wells, the estimated cost savings would be over 50 percent. Additional applications and evaluations may lead to industry and regulatory acceptance of the method as a primary characterization tool.     

Fertilizer Management in Watersheds of Two Ramsar Wetlands and Effects on Quality of Inflowing Water

Two field experiments were carried out in the watersheds of two Ramsar wetland areas, Lakes Koronia and Volvi (area A) and Lakes Mikri and Megali Prespa (area B), to study the effect of application of N fertilizer on wheat yields, the quality of runoff water, and the quality of stream water. The treatments were a combination of two methods of fertilizer application (total amount in fall, and 2/3 in fall + 1/3 in spring) at three rates (0, 100, and 200 kg N/ha) with four replications. Concentrations of NH₄ ⁺, NO₃ ⁻, NO₂ ⁻, P, and Cl⁻ and pH were determined in all water samples. Runoff water quality was not influenced by fertilizer application in either area. Chemical parameters for water did not differ along the selected watercourses in area B, while in area A they were higher in the samples taken near Lake Koronia than in the samples taken upstream, indicating that the watercourses are polluted downstream by nonagricultural sources. The differences in wheat yields between the 100 and 200 kg N/ha application rates were not high. These results call for better fertilizer management in order to achieve better yields and to diminish the possibility to have negative effects to the environment.