Are white-crowned sparrow badges reliable signals?

Status badges, such as crown plumage, mediate intraspecific interactions. The reliability of crown morphology as a status badge in male mountain white-crowned sparrows (Zonotrichia leucophrys oriantha) is uncertain. We examined morphological and physiological correlates of the proportion of crown that was white (“crown-white”) in 178 male mountain white-crowned sparrows during the 2008–2009 breeding seasons. Using a paired experimental design, we presented territory-holding males with white-enhanced and white-reduced decoys and recorded aggressive behaviors. To assess physiological constraints on signal bluffing, a subsample of birds was captured and released after manipulating natural crowns to simulate bluffed white-enhanced or white-reduced crowns; corticosterone concentrations were assayed from blood drawn upon recapture and after a restraint-induced stressor. We found a significant positive association between crown-white and a measure of body size—tarsus length—which is an established indicator of resource-holding potential. In the decoy challenge, males responded more aggressively toward white-enhanced than white-reduced decoys. In the hormone experiment, white-enhanced birds had higher baseline corticosterone levels, whereas white-reduced birds had similar concentrations to controls. Furthermore, white-enhanced birds had an attenuated restraint-induced corticosterone response, while white-reduced birds mounted a significantly larger increase in corticosterone than controls. Taken together, these findings indicate that crown-white is a reliable status badge of resource-holding potential in male mountain white-crowned sparrows during the breeding season.     

Use of ethylenediurea (EDU) to ameliorate ozone effects on purple coneflower (Echinacea purpurea)

Purple coneflower plants (Echinacea purpurea) were placed into open-top chambers (OTCs) for 6 and 12 weeks in 2003 and 2004, respectively, and exposed to charcoal-filtered air (CF) or twice-ambient (2x) ozone (O3) in 2003, and to CF, 2x or non-filtered (NF), ambient air in 2004. Plants were treated with ethylenediurea (EDU) weekly as a foliar spray. Foliar symptoms were observed in >95% of the plants in 2x-treated OTCs in both years. Above-ground biomass was not affected by 2x treatments in 2003, but root and total-plant biomass decreased in 2004. As a result of higher concentrations of select cell wall constituents (% ADF, NDF and lignin) nutritive quality was lower for plants exposed to 2x-O3 in 2003 and 2004 (26% and 17%, respectively). Significant EDU x O3 interactions for concentrations of cell wall constituents in 2003 indicated that EDU ameliorated O3 effects on nutritive quality. Interactions observed in 2004 were inconsistent.     

Integrated approach to PCE‐impacted site characterization,site management,and enhanced bioremediation

Tetrachloroethene (PCE)‐ and trichloroethene (TCE)‐impacted sites pose significant challenges even when site characterization activities indicate that biodegradation has occurred naturally. Although site‐specific, regulatory, and economic factors play roles in the remedy‐selection process, the application of molecular biological tools to the bioremediation field has streamlined the assessment of remedial alternatives and allowed for detailed evaluation of the chosen remedial technology. The case study described here was performed at a PCE‐impacted site at which reductive dechlorination of PCE and TCE had led to accumulation of cis‐dichlorethene (cis‐DCE) with concentrations ranging from approximately 10 to 100 mg/L. Bio‐Trap® samplers and quantitative polymerase chain reaction (qPCR) enumeration of Dehalococcoides spp. were used to evaluate three remedial options: monitored natural attenuation, biostimulation with HRC®, and biostimulation with HRC‐S®. Dehalococcoides populations in HRC‐S‐amended Bio‐Traps deployed in impacted wells were on the order of 10³ to 10⁴ cells/bead but were below detection limits in most unamended and HRC‐amended Bio‐Traps. Thus the in situ Bio‐Trap study identified biostimulation with HRC‐S as the recommended approach, which was further evaluated with a pilot study. After the pilot HRC‐S injection, Dehalococcoides populations increased to 10⁶ to 10⁷ cells/bead, and concentrations of cis‐DCE and vinyl chloride decreased with concurrent ethene production. Based on these results, a full‐scale HRC‐S injection was designed and implemented at the site. As with the pilot study, full‐scale HRC‐S injection promoted growth of Dehalococcoides spp. and stimulated reductive dechlorination of the daughter products cis‐DCE and vinyl chloride. © 2008 Wiley Periodicals, Inc.     

Measurements of groundwater velocity in discrete rock fractures

Estimating groundwater velocity in fracture networks using a Darcy or cubic law calculation is complicated by the wide distribution of fracture aperture often found in these systems and by the difficulty in measuring hydraulic head in discrete fracture features. Although difficult to conduct in a fractured rock setting, the point dilution method can be utilized to collect direct measurements of groundwater velocity in individual fractures. To compare measured against calculated velocities, more than 100 point dilution experiments were conducted within a 35 x 35 m area of a single fracture and in discrete fracture features within a fracture network at a larger scale. The dilution experiments were conducted by isolating a fracture feature in a borehole, measuring the hydraulic aperture, and measuring the decay of an injected tracer due to the advective groundwater flux across the fracture. Groundwater velocity was estimated using the hydraulic aperture and the rate of decay of the injected tracer. Estimates of the local hydraulic gradient were calculated via the cubic law using the velocity estimate and the hydraulic aperture. The results of the tests conducted in the single fracture show variable (1 to 33 m/day) but on average higher velocities in comparison to that measured during a natural gradient tracer experiment conducted previously (in which the effects of matrix diffusion were accounted for) and to that which would be calculated using the cubic law. Based on these results, it was determined that the best estimate of the average groundwater velocity, at the scale of the measurement area used for the cubic law calculations, could only be obtained using the largest apertures in the aperture distribution. Variability of the velocity measurements was also observed over time. Increases in velocity were attributed to the effect of rainfall although concurrent increases in hydraulic gradient were not detected (likely within the tolerance of the measuring devices). The groundwater velocities measured in the fracture network varied over a wider range than at the scale of the single fracture (from 2 to 388 m/day). No correlation, however, was observed between the size of the fracture aperture and measured velocity.     

Evaluating intervention options to achieve environmental benefits in the residential sector

Government intervention schemes in the form of policy instruments and financial incentives or rebates can have a major influence on the adoption of technologies by residential consumers to reduce their natural resource consumption and greenhouse gas emissions. However, the pattern and rate of consumer uptake of voluntary schemes are not always well-understood or easily taken into account in future scenarios analyses. This paper presents an innovative extension of the Bass diffusion model that has been integrated with multi-criteria analysis to enable explicit consideration and balancing of the impacts of technology cost, financial benefits, demographic suitability and household income on the likelihood of adoption. This ‘Intervention Options’ model is formulated into a constrained integer programming problem to allow optimisation of the size and timing of government rebates to maximise adoption rate and, ultimately, environmental benefits. The model’s capability is demonstrated using an Australian case study of 25,000 households, and historical information on the uptake of solar hot water and solar photovoltaic panels in Brisbane, Queensland. Case study results reveal new insights and important context-relevant trends that could assist policy makers to substantially improve the effectiveness of intervention schemes to achieve environmental goals within desired budgets.     

The effect of phosphogypsum on greenhouse gas emissions during cattle manure composting

Phosphogypsum (PG), a by-product of the phosphate fertilizer industry, reduces N losses when added to composting livestock manure, but its impact on greenhouse gas emissions is unclear. The objective of this research was to assess the effects of PG addition on greenhouse gas emissions during cattle feedlot manure composting. Sand was used as a filler material for comparison. The seven treatments were PG10, PG20, PG30, S10, S20, and S30, representing the rate of PG or sand addition at 10, 20, or 30% of manure dry weight and a check treatment (no PG or sand) with three replications. The manure treatments were composted in open windrows and turned five times during a 134-d period. Addition of PG significantly increased electrical conductivity (EC) and decreased pH in the final compost. Total carbon (TC), total nitrogen (TN), and mineral nitrogen contents in the final composted product were not affected by the addition of PG or sand. From 40 to 54% of initial TC was lost during composting, mostly as CO(2), with CH(4) accounting for <14%. The addition of PG significantly reduced CH(4) emissions, which decreased exponentially with the compost total sulfur (TS) content. The emission of N(2)O accounted for <0.2% of initial TN in the manure, increasing as compost pH decreased from alkaline to near neutral. Based on the total greenhouse gas budget, PG addition reduced greenhouse gas emissions (CO(2)-C equivalent) during composting of livestock manure by at least 58%, primarily due to reduced CH(4) emission.     

Occurrence and fate of pharmaceuticals and personal care products (PPCPs) in biosolids

Each year, large quantities of pharmaceuticals and personal care products (PPCPs) are used worldwide. Once conveyed to wastewater treatment plants, PPCPs can remain unchanged or undergo partial or complete transformation during wastewater treatment processes before discharge into the environment via effluent and biosolids for land application. Biosolids can be a major sink for some PPCPs. Previous investigations have indicated that land application of biosolids may be a potential important route through which PPCPs enter the environment. However, no information is available on exactly how closely the concentrations of PPCPs in the environmental media are related to the land application of PPCP-containing biosolids. This paper reviews currently available information on the occurrence of PPCPs in biosolids, methods of analysis, the potential fate of PPCPs in biosolids-applied soils, and composting as a potential means for removal of PPCPs from biosolids.     

Biodegradability of a Selected Range of Polymers and Polymer Blends and Standard Methods for Assessment of Biodegradation

Synthetic polymers are important to the packaging industry but their use raises aesthetic and environmental concerns, particularly with regard to solid waste accumulation problems and the threat to wildlife. Some concerns are addressed by attention to problems associated with source reduction, incineration, recycling and landfill. Others are addressed by the development of new biodegradable polymers either alone or in blends. Materials used for biodegradable polymers include various forms of starch and products derived from it, biopolyesters and some synthetic polymers. Starch is rapidly metabolised and is an excellent base material for polymer blends or for infill of more environmentally inert polymers where it is metabolised to leave less residual polymer on biodegradation. This should help to improve the environmental impact of waste disposal. A number of standard methods have been developed to estimate the extent of biodegradability of polymers under various conditions and with a variety of organisms. They tend to be used mainly in the countries where they were developed but there is much overlap between the standards of different countries and wide scope for development of consistent and international standards.     

Evaluating the “Catch‐Can” Test for Measuring Lawn Sprinkler Application Rates1

Abstract: The effectiveness of measuring lawn sprinkler application rates using the catch‐can test was evaluated. A survey of sources recommending the catch‐can test for measuring application rates show that catch‐can test procedures differ in the collector type, collector placement, number of collectors, and test duration. Analyses of catch‐can tests were performed to address these procedural differences, with emphasis on the type and number of collectors required to provide a reasonable level of confidence in test results. The accuracy of the catch‐can test generally improves as the number of randomly placed collectors increases. In order to achieve an accuracy of ±25% for 90 out of 100 catch‐can tests, the number of randomly placed collectors required ranged from 6 to over 50 for hand‐move systems, while for in‐ground systems, the number of randomly placed collectors required ranged from 2 to 8, depending on the pressure and percent overlap of the water distribution pattern. As long as a reasonable number of collectors were used when performing a catch‐can test, no consistent differences were observed in catch‐can test results due to type of collectors when using tuna fish cans, soup cans, or coffee mugs.     

Acid-generating salts and their relationship to the chemistry of groundwater and storm runoff at an abandoned mine site in southwestern Indiana, U.S.A.

Cation distributions in twenty samples of acid-generating salts were compared to those in groundwater and storm runoff from a coal-refuse deposit in an effort to identify source-product relationships. Two mineral suites, one primarily composed of melanterite, rozenite and szomolnokite, and the other composed almost entirely of copiapite, were found to be most abundant at the study site. Comparisons of cation distributions in salts with those in water samples lead to an hypothesis that a copiapite-rich suite precipitated from vadose-zone ground-water that was brought to the surface by evaporative forcing. The copiapite-rich suite, which contained larger concentrations of aluminum, calcium and zinc that the melanterite-rozenite-szomolnokite mineral suite, was the primary source of solutes in captured storm runoff. An analysis of samples collected during a summer thunderstorm indicated that the chemistry of surface runoff varied little with time or with distance downstream. The cation distributions in samples of groundwater indicated that iron-rich pore waters observed near the surface in late autumn may have influenced water chemistry in the deeper portions of the unsaturated zone during the 1989 recharge season. The results of this study show that the solutes produced by the two observed salt suites can be distinguished by their mole percent iron and that the source-product relationships can explain observed variability in mine drainage chemistry at the study site.