醋酸酯生产线物料输送泵的选型与污染物排放量的关系

以钱塘江上游某化工企业的醋酸酯生产线为例,通过分析物料输送泵优化技改前后的工艺流程和污染物排放情况,从而佐证化工行业物料输送泵的选型与污染物排放量是密切相关的,可以达到指导该类项目的环境影响评价和清洁生产审核,同时也能为企业的节能减排提供一定的技术依据。     

杭州市生态补偿机制的实践

建立生态补偿机制已成为社会共识,各级政府就开展生态补偿进行了多种形式的探索与实践,流域下游地区对上游地区予以适当经济补偿作为解决区域之间社会经济失衡、保护流域水资源生态安全问题的重要手段和迫切需要。本文综述了杭州市生态补偿机制,主要分析了生态补偿专项资金的实践效果及现存问题,并提出进一步完善的对策措施,旨在对中国生态补偿机制的建立和完善提供借鉴。     

LaBO3钙钛矿催化剂的VOCs催化燃烧特性

采用共沉淀法制备了LaBO3(B=Cr、Fe、Mn、Co、Ni)钙钛矿催化剂,并用XRD、BET、H2-TPR、O2-TPD等手段对其进行了表征,考察了催化剂对苯、甲苯、乙酸乙酯和丙酮的催化燃烧性能.结果表明,Cr、Fe钙钛矿晶相中存在少量的La2CrO6和La2O3杂晶相,破坏了其活性结构.Mn、Co、Ni则能与La形成完善的钙钛矿晶相,且表现出优良的催化性能,其中LaMnO3为阳离子缺陷结构,存在较丰富的晶格氧,更适合催化燃烧C—H键键能较高和难以活化的有机分子(如苯);LaCoO3、LaNiO3属于阴离子缺陷钙钛矿结构,存在更丰富的表面氧,更适合催化燃烧易在低温下活化的含氧类有机分子(如乙酸乙酯、丙酮).     

Oxidation of kerosene components in a soil matrix by a dielectric barrier discharge reactor

This paper discusses some aspects of the kerosene components oxidation in a soil matrix by a dielectric barrier discharge reactor at atmospheric pressure. The total kerosene components abatement can reaches 90% for an energy density of 960 J g_soil^?1. The analyses of the discharge cell outlet gas reveals that CO_x and hydrocarbon compounds selectivity is close to 10%. A semi-quantitative approach by GC-FID shows that the carbon content in the oxidized compounds in soil is about 20% of the carbon content in the initial kerosene components. The polar species formed in soil are a mixture of aliphatic and aromatic molecules containing alcohol and carboxylic acid groups. The process of kerosene oxidation in soil matrix is more promoted than kerosene desorption followed by an oxidation in gas phase.     

20Cr1Mo1VTiB汽机主汽门螺栓断裂失效分析

针对一起汽机主汽门螺栓断裂失效案例,对20Cr1Mo1VTiB材质进行了化学成分、力学性能、金相组织试验分析。试验分析结果表明:由于制造过程中热加工或热处理工艺不当,造成螺栓金相组织异常、冲击性能低下,在汽机运行工况下发生断裂失效。     

我国长江中下游平原典型稻田含碳温室气体通量变化特性

近年来关于碳排放研究的内容越来越受到重视,我国提出了在2030年实现碳达峰的战略目标,因此对我国温室气体排放监测的研究显得非常重要.基于涡度相关法对我国长江中下游区域典型稻田生长季的CO2和CH4通量进行监测分析,结果发现整个观测阶段稻田CO2通量呈"U"型曲线,整体表现为汇,分蘖期开始出现负值,抽穗期降到最低,通量平...     

酰胺类除草剂对铜绿微囊藻的生长影响及氧化损伤效应

酰胺类除草剂的广泛使用对水生生态环境构成了潜在风险。为探究其对藻类的毒性作用,以铜绿微囊藻为对象,分别从藻类生长和氧化损伤效应角度探讨了甲草胺、乙草胺和丁草胺对铜绿微囊藻的毒性影响。实验结果显示,酰胺类除草剂对藻类的影响存在明显的滞后效应和剂量–效应关系,低浓度暴露组刺激藻类增长,高浓度表现为抑制作用;3种酰胺类除草剂增加了铜绿微囊藻的氧化压力,并随着暴露时间的延长和浓度的增加而增强。其中,藻体内过氧化脂质降解产物丙二醛(MDA)含量明显增加,同时超氧化物歧化酶(SOD)和过氧化物酶(POD)活性也显著增强。经96 h暴露后,甲草胺(32.0 mg·L~(-1))、乙草胺(32.0 mg·L~(-1))和丁草胺(15.0 mg·L~(-1))暴露溶液中相对MDA含量分别为138%、204%和154%,相对SOD活性分别为116%、87%和115%,相对POD活性分别475%、278%和627%。结合生物量及氧化损伤效应实验结果可知,3种除草剂对铜绿微囊藻的毒性大小顺序为丁草胺乙草胺甲草胺。     

Catalytic activity of noble metal nanoparticles toward hydrodechlorination: influence of catalyst electronic structure and nature of adsorption

In this study, stabilized Pd, Pt and Au nanoparticles were successfully prepared in aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping agent. These metal nanoparticles were then tested for catalytic hydrodechlorination toward two classes of organochlorinated compounds (vinyl polychlorides including trichloroethylene (TCE), tetrachloroethylene (PCE), and alkyl polychlorides including 1,1,1-trichloroethane (1,1,1-TCA), and 1,1,1,2-tetrachloroethane (1,1,1,2-TeCA)) to determine the rate-limiting steps and to explore the reaction mechanisms. The surface area normalized reaction rate constant, k_SA, showed a systematic dependence on the electronic structure (the density of states at the Fermi level) of the metals, suggesting that adsorption of organochlorinated reactants on the metal catalyst surfaces is the rate-limiting step for catalytic hydrodechlorination. Hydrodechlorination rates of 1,1,1-TCA and 1,1,1,2-TeCA agreed with the bond strength of the first (weakest) dissociated C-Cl bond, suggesting that C-Cl bond cleavage, which is the first step for dissociative adsorption of the alkyl polychlorides, controlled the catalytic hydrodechlorination rate. However, hydrodechlorination rates of TCE and PCE correlated with the adsorption energies of their molecular (non-dissociative) adsorption on the noble metals rather than with the first C-Cl bond strength, suggesting that molecular adsorption governs the reaction rate for hydrodechlorination of the vinyl polychlorides.     

稀酸预处理铜藻制备生物乙醇工艺

选取暖温带海洋生态环境生物修复的首选物种——铜藻(Sargassum horneri)为原料进行生物乙醇的制备,以稀硫酸水解后的还原糖收率为响应值,考察水解温度、液固比、水解时间和w(H₂SO₄)等参数对水解效率的影响. 为优化稀酸水解铜藻预处理的工艺条件,在单因素试验的基础上,利用Box-Benhnken中心组合设计法和响应面分析法,建立稀酸预处理工艺参数的回归模型,并与酶水解及发酵相结合验证了铜藻稀酸预处理效果. 结果表明:①稀酸水解铜藻的最优工艺参数. 水解温度为120 ℃,液固比为20∶1,水解时间为2.00 h,w(H₂SO₄)为4.50%. ②稀酸水解铜藻过程中各影响因素之间存在交互作用,水解时间和w(H₂SO₄)的非线性作用显著. ③对经最佳稀酸预处理工艺处理后的铜藻粉进行酶水解,其还原糖收率为44.05%,是未预处理下的8.14倍,并且后续进行发酵后,乙醇产率达7.80%,是未预处理下的2.00倍. 表明铜藻是一种潜在的生物乙醇原料,稀酸预处理方法对铜藻生物乙醇的制备行之有效.