Heat waves and floods in urban areas: a policy-oriented review of ecosystem services

Urbanisation is increasing and today more than a half of the world’s population lives in urban areas. Cities, especially those where urbanisation is un-planned or poorly planned, are increasingly vulnerable to hydro-meteorological hazards such as heat waves and floods. Urban areas tend to degrade the environment, fragmenting and isolating ecosystems, compromising their capacity to provide services. The regulating role of ecosystems in buffering hydro-meteorological hazards and reducing urban vulnerability has not received adequate policy attention until now. Whereas there is a wide body of studies in the specialised biological and ecological literature about particular urban ecosystem features and the impacts of hazards upon people and infrastructures, there is no policy-driven overview looking holistically at the ways in which ecosystem features can be managed by cities to reduce their vulnerability to hazards. Using heat waves and floods as examples, this review article identifies the aggravating factors related to urbanisation, the various regulating ecosystem services that buffer cities from hydro-meteorological impacts as well as the impacts of the hazards on the ecosystem. The review also assesses how different cities have attempted to manage related ecosystem services and draws policy-relevant conclusions.     

Evaluation of aerosol sources at European high altitude background sites with trajectory statistical methods

This study has investigated the influence of synoptic weather patterns and long-range transport episodes on the concentrations of several compounds related to different aerosol sources (EC, OC, SO₄^2?, Ca²⁺, Na⁺, K⁺, ²¹⁰Pb, levoglucosan and dicarboxylic acids) registered in PM10 or PM2.5 aerosol samples collected at three remote background sites in central Europe. Air mass back-trajectories arriving at these sites have been analysed by statistical methods. Firstly, air mass back-trajectories have been grouped into clusters. Each cluster corresponds to specific meteorological scenarios, which were extracted and discussed. Finally, redistributed concentration fields have been computed to identify the main potential source regions of the different key aerosol components. A marked seasonal pattern is observed in the occurrence of the different clusters, with fast westerly and northerly Atlantic flows during winter and weak circulation flows in summer. Spring and fall were characterised by advection of moderate flows from northeastern and eastern Europe. Significant inter-cluster differences were observed for concentrations of receptor aerosol components, with the highest concentrations of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb associated with local and mesoscale aerosol sources located over central Europe related to enhanced photochemical processes. Emissions produced by fossil fuel and biomass burning processes from the Baltic countries, Byelorussia, western regions of Russia and Kazakhstan in spring and fall also contribute to elevated levels of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb. In the summer period long-range transport episodes of mineral dust from North-African deserts were also frequently detected, which caused elevated concentrations of coarse Ca²⁺ at sites. The baseline aerosol concentrations in central Europe at the high altitude background sites were registered in winter, with the exception of coarse Na⁺. While the relatively high concentrations of Na⁺ can be explained by sea salt advected from the Atlantic, the low levels of other aerosol components are caused by efficient aerosol scavenging associated to advections of Atlantic air masses, as well as lower emissions of these species over the Atlantic compared to those over the European continent and very limited vertical air mass exchange over the continent.     

An algorithm and a device for counting airborne pollen automatically using laser optics

Airborne pollen is important in relation to the social issues of pollinosis and of the environmental effects of genetically modified plants. Existing methods for pollen counting involve counting and classifying the grains that adhere to a sampling surface, requiring much time and skilled labor. We therefore have developed a method of automatically monitoring pollen, using a laser-optics instrument. In this instrument, the sideways and forward scattering of laser light by each particle is recorded in real time for computer processing. A field experiment was conducted in 2005, comparing our method with that of the older Hirst method. A scatter plot was made of the forward scattering vs. the sideways scattering for each particle. An algorithm was developed to find the optimum rectangular region of the plot for each type of pollen, and a count of points inside this region was taken as the count for that type of pollen. For the three most common types of pollen found in the field test (Urticaceae, Poaceae, and Ambrosia), the daily counts from this algorithm were compared with the daily counts from the Hirst-type (Burkard) sampler. There was a very high correlation (determination coefficient approximately 0.8) between the results of the two methods.     

Chemical composition and mass closure of ambient PM10 at urban sites

The chemical composition of PM10 was studied during summer and winter sampling campaigns conducted at two different urban sites in the city of Thessaloniki, Greece (urban-traffic, UT and urban-industrial, UI). PM10 samples were chemically analysed for minerals (Si, Al, Ca, Mg, Fe, Ti, K), trace elements (Cd, Cr, Cu, Mn, Pb, V, Zn, Te, Co, Ni, Se, Sr, As, and Sb), water-soluble ions (Cl^?, NO₃^?, SO₄^2?, Na⁺, K⁺, NH₄⁺, Ca²⁺, Mg²⁺) and carbonaceous compounds (OC, EC). Spatial variations of atmospheric concentrations showed significantly higher levels of minerals, some trace metals and TC at the UI site, while at the UT site significantly higher levels of elements like Cd, Ba, Sn, Sb and Te were observed. Crustal elements, excepting Ca at the UI site, did not exhibit significant seasonal variations at any site pointing to constant emissions throughout the year. In order to reconstruct the particle mass, the determined components were classified into six classes as follows: mineral matter (MIN), trace elements (TE), organic matter (OM), elemental carbon (EC), sea salt (SS) and secondary inorganic aerosol (SIA). Good correlations with slopes close to 1 were found between chemically determined and gravimetrically measured PM10 masses for both sites. According to the chemical mass closure obtained, the major components of PM10 at both sites were MIN (soil-derived compounds), followed by OM and SIA. The fraction unaccounted for by chemical analysis comprised on average 8% during winter and 15% during summer at the urban-industrial site, while at the urban-traffic site the percentages were 21.5% in winter and 4.8% in summer.     

Combustion particles emitted during church services: Implications for human respiratory health

Burning candles and incense generate particulate matter (PM) that produces poor indoor air quality and may cause human pulmonary problems. This study physically characterised combustion particles collected in a church during services. In addition, the emissions from five types of candles and two types of incense were investigated using a combustion chamber. The plasmid scission assay was used to determine the oxidative capacities of these church particles. The corresponding risk factor (CRf) was derived from the emission factor (Ef) and the oxidative DNA damage, and used to evaluate the relative respiratory exposure risks. Real-time PM measurements in the church during candle–incense burning services showed that the levels (91.6 μg/m³ for PM₁₀; 38.9 μg/m³ for PM_2.5) exceeded the European Union (EU) air quality guidelines. The combustion chamber testing, using the same environmental conditions, showed that the incense Ef for both PM₁₀ (490.6–587.9 mg/g) and PM_2.5 (290.1–417.2 mg/g) exceeded that of candles; particularly the PM_2.5 emissions. These CRf results suggested that the exposure to significant amounts of incense PM could result in a higher risk of oxidative DNA adducts (27.4–32.8 times) than tobacco PM. The generation and subsequent inhalation of PM during church activities may therefore pose significant risks in terms of respiratory health effects.     

Development of a scale of perceived environmental annoyances in urban settings

The construction and validation of an original scale was pursued to measure perceived environmental annoyances in urban settings. This scale included all the potentially aversive situations encountered in the daily lives of city-dwellers. The answers of 926 French respondents to our initial 68-item scale were first analysed. Using statistical techniques, the number of items was reduced to 51 from which the factorial structure was extracted. Seven principal dimensions emerged: feelings of insecurity, inconveniences associated with using public transport, environmental annoyances and concerns for global ecology, lack of control over time related to using cars, incivilities associated with the sharing of public spaces between different users, lack of efficiency resulting from the density of the population, and an insecure and run-down living environment. We also examined these dimensions of perceived environmental annoyances in urban settings according to the sex, age, occupational category and geographical location of respondents. The validated multidimensional scale constitutes a promising instrument for urban research that could usefully be employed in the emerging field at the interface between health psychology and environmental psychology.     

Concentrations of organochlorine pesticides and 2,4,6-trichloroanisole in cork bark

Organochlorine pesticides are persistent lipophilic organic pollutants and tend to accumulate in growing plants. During growth, cork is in contact with the open air for long periods (9-12 years). Owing to the previous widespread use of organochlorine pesticides and their high persistence in the environment, there is a risk that residues of such pesticides may be present in cork.In this study, the concentrations of 14 organochlorine pesticides—all of which are indicators of environmental pollution—were analyzed in cork bark samples from three regions in Spain and one in Portugal. In addition, the concentrations of 2,4,6-trichlorophenol (TCP) and 2,4,6-trichloroanisole (TCA) were also analyzed.Our results show only very low concentrations of lindane, γ-HCH (<2.6 ng g⁻¹) and its byproducts α-HCH (<3.5 ng g⁻¹) and β-HCH (<0.6 ng g⁻¹).Among the DDT and its metabolites, only two were found: p,p′-DDT was found in a cork sample from Extremadura (0.1 ng g⁻¹) and p,p′-DDE was present at a maximum concentration of 2.9 ng g⁻¹ in a cork sample from Castile-La Mancha. However, all concentrations were well below the legal limit established by Regulation (EC) No. 396/2005 (10 ng g⁻¹ in foodstuffs). We can conclude, therefore, that the cork samples we studied complied with food safety standards.     

Is corporate social responsibility possible in the mining sector? Evidence from Catalan companies

This paper examines the role and diffusion of corporate social responsibility (CSR) management, especially in relation with the adoption of other management systems, in small and medium sized companies in the surface mining industry in Catalonia (Spain). Specifically, it identifies the most salient CSR practices, procedures and metrics and the profiles of companies more prone to adopt them. To fulfill this aim, a survey has been conducted. Results show that mining companies are familiar with CSR practices, but there is not much formalization of procedures and measurement systems of CSR yet. Results show that the majority of socially responsible practices are related to environmental issues and therefore there is a relation between CSR and the application of environmental management systems. The analysis reveals that the management of CSR activities improves with the diffusion of knowledge on CSR practices. A second survey collected the opinion of professional associations in the sector. Respondents indicate that an improvement in CSR management will lead to a better global competitive position.     

The use of recycled metal in dentistry: Evaluation of mechanical properties of titanium waste recasting

Environmental concerns are increasing rapidly, and the public and industry are concerned about natural resources. The products are produced to meet the customer's demand as to quality. However, today it is equally important to take into account cost, ecological factors in production and recycling of products. The same way, the dentistry must contribution with a recasting the alloys used to rehabilitation oral.This study evaluated the effect of the condition of Ti (as-received and re-cast) on its mechanical properties, microstructure and fractography. Castings (n = 6) with Ti in the as-received and once recast condition were made in a centrifugal casting machine using a high-purity argon gas. The ultimate tensile strength (UTS), proportional limit (PL) and elongation (EL) of the as-received specimens were evaluated in a universal testing machine at a crosshead speed of 1 mm/min. The fractured specimens were polished down for Vicker's microhardness (VHN) measurement (100 g/15 s) from 25 μm below the cast surface, then at depths of 50, 100, 200 and 500 μm. The microstructures of the alloys were also revealed. Scanning electron microscopy fractography was undertaken for the fractured surfaces after testing. The data from the mechanical tests and hardness were subjected to the Student's t-test and two-way repeated measures ANOVA, respectively. Tukey's test was used for pairwise comparison (α = 0.05). Higher UTS, PL and VHN and lower EL were observed for recast cp Ti. The microstructure was not influenced by recasting, but the mode of fracture was.The use of the recasting procedure can lower the costs of cp Ti castings and can be safely in dentistry.