垃圾渗滤液层状砂箱参数拟合试验及模拟

基于相似模拟条件,研究了垃圾渗滤液污染物在层状含水层中运移规律,通过数值模拟方法拟合了层状含水层的渗透性及弥散度,利用拟合参数分析了阜新垃圾填埋场有机污染物在地下环境中的迁移和时空分布规律,该实验和数值模型较好地反映了层状土中污染物渗漏的基本特征,对预测、控制渗滤液污染地下水提供了一种有效的方法。     

Economic Globalization and Industrial Pollution

Abstract

In order to study the relationship between economic globalization and industrial pollution, this paper developed the theoretical framework and used simultaneous equations. The result shows that economic globalization has influences on the industrial pollution mainly by the direct effect of scale, structure and technology as well as the indirect effect of income and policy. Considering all the factors, economic globalization, especially foreign direct investment (FDI), will reduce industrial pollution, in which technology spillover effect plays an important role.     

辽宁省经济发展与环境污染水平计量模型研究

选取辽宁省1981-2009年经济与环境数据,通过计量模型探讨辽宁省经济增长与环境质量的演替轨迹.结果表明,1981-2009年辽宁省环境库兹涅茨曲线大体呈现“倒U形+U形+倒U形”特征,即“M形”,表明辽宁省的综合环境污染水平随经济增长呈现波动变化;工业废水排放量、工业废气排放量、工业固体废物产生量等单项指标的环境库兹涅茨曲线形态分别为“U形”曲线左侧部分、“U形+倒U形”和“U形”曲线右侧部分;进一步分析表明,辽宁省EKC特征与工业结构变化、环境保护投资等有显著相关性.     

Using a GIS Model to Identify Internally Drained Areas and Runoff Contribution in a Glaciated Watershed1

Macholl, Jacob A., Katherine A. Clancy, and Paul M. McGinley, 2011. Using a GIS Model to Identify Internally Drained Areas and Runoff Contribution in a Glaciated Watershed. Journal of the American Water Resources Association (JAWRA) 47(1):114‐125. DOI: 10.1111/j.1752‐1688.2010.00495.x Abstract: Glaciated watersheds are not easily delineated using geographic information systems’ elevation‐based algorithms, especially where stream networks are disconnected and there are large regions of internally drained areas. This paper presents the results of an analysis using the Potential Contributing Source Area (PCSA) model to identify potential contributing areas, defined as areas from which runoff is physically capable of reaching a drainage network. The investigation was conducted to define the potential contributing areas in a glaciated region of northwest Wisconsin. The curve number (CN) method was used to predict runoff volumes in the watershed. The streamflows of four tributaries were measured and the runoff portion of the hydrograph quantified to be compared with runoff estimates calculated using the potential contributing areas and the traditional catchment area. Runoff producing events occurred, but the use of area‐weighted CN values was unsuccessful in modeling runoff due to all precipitation depths during the study period falling below the initial abstraction. A distributed CN approach provided runoff estimates that were generally better using the potential contributing areas compared with using the traditional catchment area. The extent of the minimum contributing area, estimated for a range of precipitation events, was found to be substantially less than the potential contributing areas, suggesting that the PCSA model delimits the maximum boundary of potential contributing areas.     

金水河流域矿物元素生物地球化学交换模式

通过对金水河流域矿物元素生物地球化学交换模式的研究,得到以下结论：（1）在不同空间位置的矿物元素对河水的水质贡献率不相同。河水成分贡献主要来源于硅酸盐风化,在金水河流域生态系统不同空间位置矿物元素对河水水质贡献率方程为：YRiverwater=0.242＋0.203 XRain＋0172 XLitter＋0.471 XSoilwater（r2=0.55）。（2）固-液相界面（土壤-土壤水溶液）离子交换过程拟合表明：离子交换过程符合二、三次曲线模型。（3）区域内碳酸盐岩含较少的Na＋和K＋,且受酸雨等影响。Na＋在土壤-土壤溶液之间的分配行为可能加重土壤盐碱化的趋势。土壤和枯枝落叶层HCO3-和TDS值均处于稳定的范围内。（4）输入性污染分析表明,流域内土壤基本表现出物理性质改善;但却表现出贫养化和生物地球化学性质恶化的极化趋势。人为活动输入污染物影响显著,在全球变化背景下,酸雨和干旱加剧了水溶液组成的变化。     

振打机构摆臂疲劳寿命仿真及可靠性分析

目的 针对振打机构关键部件摆臂,开展疲劳寿命及关键参数影响程度仿真分析,获得寿命分布及可靠性数据,校核摆臂设计是否满足使用要求。方法 基于S-N曲线进行振打机构摆臂的寿命仿真,开展动力学仿真与应力仿真,获得不同温度下摆臂最低寿命与管壁壁厚的关系。通过对关键寿命影响参数进行影响程度仿真分析,获得寿命分布及可靠性数据。结果 当摆臂壁厚大于1.77mm时,摆臂的平均寿命大于144万次,满足产品设计要求。疲劳寿命与弹性模量E负相关,与抗拉强度和表面加工系数正相关。可靠度R取0.8时,摆臂的可靠寿命约为29 005次;可靠度R取0.9时,摆臂的可靠寿命约为11 891次。结论 振打机构摆臂壁厚需大于1.77 mm,摆臂表面质量系数大于0.827 3,材质抗拉强度大于907.76 MPa,弹性模量E小于2.041×10^(5)MPa。     

基于细胞尺度的光照对四尾栅藻生长的影响

以四尾栅藻（Scenedesmus quadricauda）为研究对象,采用平行平板流动腔装置,基于计算机视觉的藻细胞动态生长观察方法,从单细胞尺度研究不同光照强度对四尾栅藻藻细胞生长的影响.成功建立了四尾栅藻个体生长曲线模型,模型拟合效果良好.结果表明：在8000lux光照强度下,藻细胞的体积最大比生长速率最大,即四尾栅藻生长的最适光照强度为8000lux;适宜的光照条件可以增加藻细胞分裂时的大小,小于8000lux时,藻细胞分裂体积随着光照强度的增加而增加,大于8000lux时,藻细胞分裂时体积反而越来越小;较高的光照强度还有利于藻细胞适应新的环境,减少藻细胞复苏时间.     

Temporal limits to simulating the future spread pattern of invasive species: Buddleja davidii in Europe and New Zealand

The spread of invasive species is a major ecological and economic problem. Dynamic spread modelling is a potentially valuable tool to assist regional and central government authorities to monitor and control invasive species. To date a lack of suitable data has meant that most broad scale dispersal models have not been validated with independent datasets, and so their predictive ability and reliability has remained unscrutinised. A dynamic, stochastic dispersal model of the widely invasive plant Buddleja davidii was calibrated on European spread data and then used to project the temporal progression of B. davidii's distribution in New Zealand, starting from several different historical distributions. To assess the model's performance, we constructed an occupancy map based on the average number of simulation realisations that have a population present. The application of Receiver Operating Characteristic (ROC) curves to occupancy maps is introduced, but with specificity substituted by the proportion of available area used in a realisation. A derivative measure, the partial area under these curves when assessed through time (pAUC), is introduced and used to assess overall performance of the spread model. The model was able to attain a high level of model sensitivity, encompassing all of the known locations within the occupancy envelope. However, attempting to simulate the spread of this invasive species beyond a decade had very low model specificity. This is due to several factors, including the exponential process of spread (the further a population spreads the more sites exist from which it can spread stochastically), and the Markovian chain property of the stochastic system whereby differences between realisations compound through time. These features are seen in many reports of spread models, without being explicitly acknowledged. Our measure of pAUC through time allows a model's temporal performance and its specificity to be simultaneously assessed. While the rapid deterioration in model performance limits the utility of this type of modelling for forecasting long-term broad-scale strategic management of biological invasions, it does not necessarily limit its attractiveness for informing smaller scale and shorter term invasion management activities such as surveillance, containment and local eradication.     

活性炭常温吸附实验研究

活性炭因有较大的比表面积和经济易得性,常作为气体吸附法净化气体的吸附剂。SO2是大气环境质量指示的一个重要大气环境因子,其排放被严格控制。SO2的吸附受多种因素影响,本研究选取商品粒状活性炭作为样品,在常温、常压、相对湿度RH=0%、用SO2标气和N2模拟配制气体的条件下,进行了活性炭物理吸附SO2的穿透曲线和吸附容量的研究,结果显示该商品活性炭实验吸附穿透曲线和吸附容量随其颗粒直径的减小而增加,吸附曲线也由陡峭变平坦。所得实验结果为商品活性炭的使用提供实验数据支撑。     

地铁隧道排烟口无量纲结构参数与局部阻力研究*

针对现有行业规范中的排烟口结构参数尚不明确的问题,依托过海瓦贵区间隧道,搭建隧道通风排烟模型实验系统。设定11种排烟口面积工况,结合实验与数值模拟,得到排烟口上、下游的静压值和风速。引入动能修正系数,推导出基于上下游能量差的排烟口局部阻力表达式,绘制出无量纲面积比与局部阻力系数曲线族。研究结果表明:排烟口长宽比值较大时,不利于排烟口下方风流流动;在同一风机组合工况下,当排烟口面积缩小时,局部阻力系数会呈现出先减后增的趋势;提出排烟口最优结构长宽比为1.06。研究结果可为相关规范制定提供参考,并为防灾救灾提供理论支持。