论水处理工程中的节能

人们在污水处理厂的建设中对污水处理工艺的先进性、可靠性以及工程投资大小考虑较多,而对污水处理厂建成后的运营管理考虑较少,因而造成许多污水处理厂建成后由于运营成本过高而不能正常运行。从能耗角度出发,分析造成运行成本高的主要原因以及相应采取的措施。     

农村沼气在北方农业源减排中的应用浅析

农村沼气作为一种特殊的清洁能源,在沈阳市农村节能减排、应对气候变化和发展低碳经济、促进新农村建设方面发挥了巨大的作用。本文通过对沼气工程在北方地区应用的阐述,力图推动北方农村沼气在农业源减排工作中的应用。     

Development of chemically produced hydrogen energy-based impact bonding process for dissimilar metals

There has been a growing demand in the fabrication of dissimilar metal parts for application in the automotive, aerospace, defense, chemical and nuclear industries. Welding of dissimilar materials can be accomplished via impact welding, which can minimize the formation of a continuous inter-metallic phase, while chemically bonding dissimilar metals. This paper discusses an innovative technique for bonding dissimilar metals by chemically produced hydrogen energy by reacting aluminum powder and water. Experiments were carried out to study impact bond characteristics using copper and stainless steel cylindrical billets. The influence of nosed flyer billet angle and billet mass on bonding characteristics were studied. The test results have demonstrated that the nosed flyer billet angle has significant influence on wavy bond patterns at the interface. Among the three flyer billet nose angles of 9°, 12° and 15°, the billets with a flyer angle of 15° resulted in a complete wave morphological pattern along the whole sample cross-section. This study shows the potential of developing a cost effective system/machinery where discrete metal parts can be bonded at near net shape.     

节能降耗技术在污水处理中的应用

通过对污水泵进行变频调速改造及污水处理工艺优化,实现了污水处理的降耗节能。     

海洋环境水下电场时频特征分析

目的掌握海洋环境水下电场主要能量来源和衰减规律。方法结合理论研究环境电场幅值随时间的变化规律,重点分析水下环境电场不同频带的频谱分布,最后计算得到海洋环境水下电场不同频点的幅值在整个频带所占比重。结果海洋环境水下电场随海水电导率和海水运动强度的减弱,幅值降低,能量主要集中在0.01~1 Hz的低频以及工频处,在一定的空间范围内海洋环境水下电场的一致性较强。结论实验结果与理论分析结果具有一定的吻合度。     

北京市生活垃圾焚烧厂耗能排污特征及节能减排潜力

将生活垃圾焚烧厂从整体到局部分为场站-工艺-单元三个层次,通过现场调查,获取了北京市生活垃圾焚烧设施在2009~2011年不同层次耗能排污数据。分析表明,在焚烧工艺中焚烧单元处理单位垃圾的电耗达到60.83 kW·h,余热发电单元水耗最大,尾气处理单元的电耗和水耗相对较小。不同场站在处理单位垃圾时烟气和炉渣产量比较接近,但飞灰排放差异较大,在2.92~24.78 kg/t垃圾之间。渗沥液水量年际变化较大,水质相对稳定,MBR单元对污染物的去除效果最好,但其耗电量较大,占渗沥液处理工艺总耗电量的87.55%。焚烧工艺发电最优值为423.77 kW·h/t垃圾,产生的电能除满足自身需求外,还剩余1.8×108 kW·h的电能,可用于渗沥液处理工艺或输向场站外部。每吨渗沥液处理最多可产生中水0.962 t,全北京市每年产生中水196456 t/a,使用潜力大。     

下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟

介绍了一种新型的钢框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能(自定心),设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架梁柱节点的构造和工作原理,以节点的低周反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在...     

风能资源开发利用的社会需要和发展前景

开发风能资源、利能风力发电在我国虽然只有数十年，但发展却很快。作为可再生的清洁能源越来越受到重视。不仅有巨大的环保意义，也有突出的经济效益。本文从风能利用的意义和社会需要展开论证，结合我国风能资源利用的概况，特别是结合风电装机最多的新疆的实际情况进行估算，从多侧面论述了风能资源的开发利用问题。     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.     

Urban Energy Efficiency from Cities in China and Policy Implications

Using 1995-2006 panel data for 210 cities, this article firstly measures total factor energy efficiency for Chinese cities with constant return to scale data envelopment analysis model,and then describes the features of regional differences. The results show that the changing trend displays four "reversed U" shapes. A turning point of widening gap occurred among cities in 2000 and there was a certain convergence among four regions. Urban energy efficiency level is unstable. Cities with low efficiency and high energy input will be the focus of energy-saving and reducing emissions. According to Tobit model, resource endowment, temperature, industrial structure, technology level and variety of policy factors should be treated differently in different situations.