Numerical investigation on performance of protective layer around large-scale chemical storage tank against impact by projectile

The protective layer of chemical storage tank has a significant effect in risk mitigation of projectile-related accidents but the research is still in infancy. In order to investigate the performance of protective layer against projectile, dynamic response process of the large-scale vertical storage tank impacted by the end-cap fragment is simulated based on the LS-DYNA. In this paper, some key factors (thickness, layering order and number of layers) affecting its performance are discussed, which can be characterized by the deformation degrees of the target tank. It is found that the anti-penetration performance is improved rapidly with the increase of thickness, and aluminum (Al) protective layer shows a higher sensitivity to thickness change compared to Ultra-High Molecular Weight Polyethylene (UHMWPE) protective layer. Three double-layered protective layers for different sequences are investigated and the Al-UHMWPE protective layer shows best performance. For the Al protective layers arranged in various combinations of equivalent total thickness, better performance is provided by monolithic structures than layered one. This study demonstrated the rational design of the protective layer around chemical storage tanks in material selection and structure configuration.     

湿式除尘器氢气爆炸事故控制研究*

为降低铝合金湿式除尘系统发生氢气爆炸事故的风险,提出1种氢气抑制的方法用来降低铝合金湿式除尘系统发生氢气爆炸事故的可能性。选取柠檬酸钠作为抑制剂开展抑氢实验研究,得到不同浓度的柠檬酸钠溶液随时间变化的抑氢曲线。当柠檬酸钠溶液浓度为0.4~4 g/L时,能有效抑制铝合金粉尘与水的反应。通过扫描电子显微镜(scanning electron microscope,SEM)和能量色散谱（energy dispersive spectroscopy,EDS)分析对铝合金粉与柠檬酸钠溶液反应后的产物进行表征。最后,对本文提出的抑氢方法的经济性进行分析,明确该方法在节约安全投入方面具有非常明显的优势。抑氢本质化安全设计方法为控制铝合金湿式除尘系统氢气爆炸事故提供了1种新的思路,同时也可被控制核反应堆氢气爆炸事故所借鉴。     

常态化疫情防控背景下区域应急医疗物资选址-分配模型*

在常态化疫情防控背景下,为避免本土病例造成区域不同需求主体防护物资短缺问题,构建最小化医院物资集散点需求未满足率加权和、最大化物资购买集中点分配公平性的储备库选址-分配模型,并基于某市相关数据,利用改进的非支配排序遗传算法（NSGA-Ⅱ）进行仿真研究。结果表明:某市应选择储备库数目为5,在物资分配时考虑物资防护等级要求,可减少医院物资集散点物资浪费,增加物资购买集中点获得量。     

Degradation of 2,4-dichlorophenol with a novel TiO2/Ti-Fe-graphite felt photoelectrocatalytic oxidation process

Degradation of 2,4-dichlorophenol(2,4-DCP)was studied in a novel three-electrode photoelectrocatalytic(PEC)integrative oxidation process,and the factors influencing the degradation rate,such as applied current,flow speed of O_2,pH,adscititious voltage and initial 2,4-DCP concentration were investigated and optimized.H_2O_2 was produced nearby cathode and Fe~(2 )continuously generated from Fe anode in solution when current and O_2 were applied,so,main reactions,H_2O_2-assisted TiO_2 PEC oxidation and E-Fenton reaction,occurred during degradation of 2,4-DCP in this integrative system.The degradation ratio of 2,4-DCP was 93% in this integrative oxidation process,while it was only 31% in E-Fenton process and 46% in H_2O_2-assisted TiO_2 PEC process.So,it revealed that the degradation of 2,4-DCP was improved greatly by photoelectrical cooperation effect.By the investigation of pH,it showed that this integrative process could work well in a wide pH range from pH 3 to pH 9.     

玉米秸秆发酵浸出液模拟废水发酵产氢的放大实验研究

在20L的半连续流发酵罐中,以牛粪堆肥为产氢菌源,按照玉米秸秆发酵浸出液的主要成份配制模拟废水,考察和分析了几个关键环境因素对发酵产氢的影响。结果表明,HRT、C/N、Fe2+浓度和模拟废水浓度对发酵产氢均有不同程度的影响。在本实验条件下,秸秆模拟废水的氢产量、氢浓度和产氢速率分别为11.80mol/kg、56%和8.81L/(L?d),底物转化率大于90%,废水中COD去除率为39.40%。在整个发酵产氢过程,液相主要发酵副产物为丁酸、乙酸和丙酸以及少量的乙醇和丁醇。     

异养硝化细菌Bacillus sp. LY脱氮性能研究

研究了异养硝化细菌Bacillus sp. LY的脱氮性能.结果表明,Bacillus sp. LY是1株具有脱氮能力的异养硝化细菌.在NH⁺₄-N浓度分别为40、80和120 mg/L 3种情况下,120 h反应后,氨氮的去除率分别是100%、85.7%、73.7%,总氮的去除率分别是76.6%、53.4%、64.8%,在菌液初始浓度相同的情况下,随着NH⁺₄-N浓度的增加,细菌的硝化速率以及脱氮速率呈现下降的趋势.有机物浓度是影响Bacillus sp. LY脱氮性能的重要因素,低的有机物浓度会阻碍细菌脱氮性能的发挥,中的有机物浓度会促进细菌脱氮性能的发挥,使体系的脱氮效果达到最佳,高的有机物浓度并不能再次提升细菌的脱氮性能.在Bacillus sp. LY作用下,有机氮经过氨化作用生成氨氮,通过2条可能的途径转化为氮气.1条途径是氨氮先硝化生成亚硝酸盐与硝酸盐,然后反硝化生成氮气.另1条途径是氨氮被氧化生成羟胺,然后脱氢生成氧化亚氮并进一步转化为氮气.这些研究可为开发新型高效生物脱氮工艺提供参考.     

废弃电容器封存点及旧工业场地多氯联苯的污染特征

研究了四川资阳机车厂废弃电力电容器封存点与旧工业场地土壤与降尘中28种多氯联苯（PCBs）的污染水平与组成特征.电容器封存山洞未封闭洞口处土壤中PCBs含量最高,28种PCBs的总含量（ΣPCBs）达227 502 ng.g-1,铸铁车间窗台降尘中也有高残留的PCBs,ΣPCBs在10μg.g-1以上,封存点和铸铁车间样品中PCBs单体含量之间均存在显著的正相关关系（P〈0.01）.高污染样品中PCBs的同族体分布均以四氯代PCBs为最高,其次为三氯代PCBs和五氯代PCBs.与封存点土壤相比,铸铁车间样品中高氯代PCBs的贡献更大.12种类二英PCBs的毒性当量（TEQ）介于75.43～24 027 pg.g-1之间,远大于电子垃圾拆解区土壤,但普遍都以PCB126的毒性当量贡献占绝对优势.     

Simultaneous removal of hydrogen sulfide and toluene in a bioreactor: Performance and characteristics of microbial community

We investigated the correlation between performance and the bacteria community composition by H2S and toluene co-treatment. Operation of the bioreactor was divided into four stages, in which the inlet concentration of toluene and H2S were gradually increased. In Stage I, toluene was the sole target compound with an average removal e ciency of 86.49%. After adding H2S in Stage II, removal e ciency of toluene decreased immediately and recovered gradually to 85.96%. When the inlet concentration of toluene and H2S was increased in Stage III and Stage IV, respectively, the average removal e ciency for toluene increased continuously from 86.31% to 87.24%. The elimination capacities of toluene increased with increasing inlet loading rates of toluene and H2S. Results of the PCR-DGGE analysis showed a turnover growth and decline of the microbial populations in the bioreactor. In Stage I, the dominant toluene-degrading bacteria mainly contained Pseudomonas sp. strain PS+ and Hydrogenophaga sp. In Stage IV, however, the dominant toluene-degrading bacteria was aciduric bacteria (Clostridium populeti). The dominant microbial community in the bioreactor enhanced the elimination capacity of toluene, and adding H2S changed the environment of microbial growth, thus resulted in an evolution of dominant microorganisms. Analyses of microbial community and their activities provides valuable information to e ciently enhance simultaneous removal of toluene and H2S in the bioreactor.     

Modification of CeO2-ZrO2 catalyst by potassium for NOx-assisted soot oxidation

Potassium-modified ceria-zirconia catalyst was synthesized by wetness impregnation method.The ageing treatment was performed in static air at 800°C for 20 hr to evaluate the thermal stability of the catalyst.The catalysts were characterized by X-ray diffraction,BET surface area,oxygen storage capacity,NOx-temperature programmed desorption and soot-temperature programmed oxidation measurements.By introduction of potassium,the maximum soot oxidation rate temperature(Tm) of the ceria-zirconia based catalyst de...     

A kinetic model of Ti（IV）-catalyzed H2O2/O3 process in aqueous solution

A kinetic model for the Ti(IV)-catalyzed H₂O₂/O₃ process was established, and the experimental results demonstrated that the model could well describe this ozone-based oxidative system mathematically and chemically.