电子产品故障物理模型研究与应用进展

提出了故障物理模型的基本概念,对几种常见的电子产品故障物理模型,包括互连热疲劳模型、互连振动疲劳模型、电迁移模型和与时间相关的介质击穿模型等进行了分析,总结提出了基于失效发生因素和失效发生过程的损伤模型建模等两种故障物理模型的建模方法。结合工程应用情况,对两种故障物理模型的应用方法——可靠性仿真分析方法和可靠性加速试验方法进行了讨论。最后对故障物理模型的研究进行了展望。     

大气颗粒物中类腐殖酸的研究进展

类腐殖酸(HULIS)是一类广泛存在于云、雾、雨水和大气气溶胶颗粒中的大分子有机物.HULIS既可通过吸收和散射太阳辐射直接影响大气热平衡,又能参与云凝结核的形成间接影响全球气候,加之其重要的环境和健康效应,近年来引起科学界的广泛关注.本文综述了大气颗粒物中类腐殖酸的研究成果,主要包括HULIS的分离、提取和分析方法,HULIS的主要理化性质、浓度和季节变化,以及HULIS的来源和国内外研究现状,并对该领域的研究前景进行了分析和展望.     

物理气相沉积硬质耐腐蚀磨损防护涂层研究进展

叙述了用物理气相沉积技术制备的硬质耐腐蚀磨损防护涂层的研究进展。重点介绍了腐蚀磨损耦合工况特性和作用机理,单元、多元掺杂氮化物涂层,高熵氮化物涂层,多层、纳米多层、纳米复合、梯度氮化物涂层耐腐蚀磨损性能研究,非金属元素/金属元素掺杂DLC涂层、多层复合DLC涂层耐腐蚀磨损性能研究,并对涂层改性、强化机理和腐蚀磨损失效机制进行了总结。最后,提出了未来物理气相沉积硬质耐腐蚀磨损防护涂层重点发展的方向,应重点发展涂层组元/结构设计、力–电耦合损伤机理研究、高效率研发设计、涂层先进制备装备与评估体系等方面的能力。     

洞庭湖钉螺扩散与水情变化规律

洞庭湖区是目前我国钉螺分布范围最广且血吸虫病疫情最难防治的疫区。为揭示近年来洞庭湖区钉螺扩散与疫区水情变化的关系，从洪水对钉螺扩散及其孳生地环境淹没时间影响考虑，提出了表征疫区钉螺扩散及孳生地变化的水情指标，选用最能综合反映洪水年水情变化的汛期平均水位作为疫区水情变化的表征指标，并以洞庭湖为例定量分析了洞庭湖区钉螺扩散与以城陵矶站汛期平均水位为指示性指标的疫区水情的相关关系。其结果显示洞庭湖区钉螺面积与湖区汛期平均水位线性相关性显著，其相关关系式为y＝0.107 2x+14382(r=0822,p<005)，其中y为洞庭湖区钉螺分布面积，x为城陵矶站汛期平均水位。     

黄河源区斑块化退化高寒草甸土壤细菌群落多样性变化

为研究海拔变化和退化过程中高寒草甸土壤细菌群落多样性的变化规律,利用MiSeq高通量测序技术,分析不同海拔活动斑块、非活动斑块、恢复斑块和高寒草甸土壤细菌群落多样性,利用冗余分析对细菌多样性和环境因子进行分析.结果发现,3种类型斑块中主要的土壤细菌门均是变形菌门（Proteobacteria）、放线菌门（Actinobacteriota）和酸杆菌门（Acidobacteriota）.细菌优势属为RB 41 、鞘脂单胞菌属（Sphingomonas）和慢生根瘤菌属（Bradyrhizobium）.RB 41 和慢生根瘤菌属相对丰度随海拔升高而下降,随斑块演替而增加,但3种类型退化斑块相对丰度均显著低于高寒草甸（P<0.05）.退化斑块土壤碳固定功能的细菌丰度,大于健康高寒草甸.不同斑块的细菌Chao1指数和物种数显著高于高寒草甸（P<0.05）.冗余分析发现,生物结皮盖度和全氮是海拔4013 m处细菌优势门的主要影响因子;生物量、全氮和pH对高海拔4224 m细菌优势门影响较大.生物量和全钾显著影响海拔4013 m的细菌属分布,海拔4224 m地区莎草科盖度和速效氮为细菌优势属的主要影响因子.生物结皮和pH对细菌多样性影响较大.不同海拔地区细菌的影响因子发生着较大变化,在研究细菌多样性变化的过程中,不仅要关注高寒草地退化的影响,还应考虑海拔高度的作用.     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

Platinum (IV) recovery from chloride solution by functionalized acrylic copolymers

Two acrylic adsorbents with different morphological structures and bearing amidoethylenamine and thiol groups were obtained and used for platinum sorption from chloride solution by the batch method. Physico-chemical parameters that influence adsorption such as initial Pt(IV) concentration, stirring time, pH, and adsorbent amount were investigated. The thermodynamic parameters of Pt(IV) sorption on the synthesized adsorbent were also evaluated based on Langmuir and Freundlich isotherms. Thermodynamic parameters estimated from Langmuir constants indicated that the adsorption is spontaneous, exothermic and there is a disordered state at the molecular level. The models used to analyze the sorption rate led to the conclusion that the most important step in the sorption of Pt(IV) could be both particle diffusion and chemical reaction of [PtCl₆]⁻ with amine functional groups. Thus, both the ion exchange and complex formation mechanisms can occur via nitrogen atoms in the recovery of Pt(IV) on the studied adsorbent.     

Monte Carlo analysis of field water flow comparing uni- and bimodal effective hydraulic parameters for structured soil

Soil structure critically affects the hydrological behaviour of soils. In this paper, we examined the impact of areal heterogeneity of hydraulic properties of a structured soil on soil ensemble behaviour for various soil water flow processes with different top boundary conditions (redistribution and drainage plus evaporation and infiltration). Using a numerical solution of the Richards' equation in a stochastic framework, the ensemble characteristics and flow dynamics were studied for drying and wetting processes observed during a time interval of ten days when a series of relatively intense rainfall events occurred. The effects of using unimodal and bimodal interpretative models of hydraulic properties on the ensemble hydrological behaviour of the soil were illustrated by comparing predictions to mean water contents measured over time in several sites at field scale. Although the differences between unimodal and bimodal fitting are not significant in terms of goodness of fit, the differences in process predictions are considerable with the bimodal soil simulating water content measurements much better than unimodal soil. We also investigated the relative contribution of the soil variability of each parameter on the variance of the water contents obtained as the main output of the stochastic simulations. The variability of the structural parameter, weighting the two pore space fractions in the bimodal interpretative model, has the largest contribution to water content variance. The contribution of each parameter depends only partly on the coefficient of variation, much more on the sensitivity of the model to the parameters and on the flow process being observed. We observed that the contribution of the retention parameters to uncertainty increases during drainage processes; the opposite occurs with the hydraulic conductivity parameters.     

棉秆基活性炭的制备及其对2,4-二硝基苯酚的吸附

以棉秆为原料，以KOH为活化剂，制备了高比表面棉秆基生物质活性炭。分析了制得的活性炭的元素组成、表面官能团、吸附能力等物化性能，探讨了浸渍比，活化温度，活化时间等工艺参数对制备活性炭得率、表面官能团、碘值、亚甲基蓝值等性能的影响，并通过静态吸附实验比较了不同条件下制备活性炭对2，4-二硝基苯酚的吸附性能，探讨了典型炭样品对2，4-二硝基苯酚的等温吸附特性。结果表明，KOH活化棉秆基生物质活性炭的表面物化性质随浸渍比、活化温度等工艺参数变化而变化，活化适宜条件为浸渍比1：3、活化温度800℃、活化时间90 min，在此条件下制得的炭样的碘值为1 251 mg/g，亚甲基蓝吸附值为478 mg/g，分别是国家一级品标准的1.25倍与3.54倍；对2，4-二硝基苯酚的Langmuir最大吸附量为747 mg/g，与Freundlich模型相比，Langmuir模型能较好地描述2，4-二硝基苯酚在炭样上的吸附行为，表明制备活性炭样品表面吸附位的能量分布较为均一。     

Interactions Among the Copper Species and Forms in Sea Water/Sediments and Copper Bioaccumulation in Oysters

Abstract

Earlier papers indicated that the first incident of green discoloration in oysters (Crassostrea gigas) and the mass mortality observed in 1986 along the Taiwan Erhjin Chi coastal area were caused by the higher contents of total copper and copper species (mainly bioavailable and free ion) in sea water. the copper in sea water would be sorbed by suspended matter and transferred to sediments, and the copper in the sediments would also be desorbed to sea water. Processes of copper adsorption and desorption are the major factors influencing the contents of total copper and copper species in sea water and sediments. in this study, the Erhjin Chi sediments were mixed with sea water by a shaker technique. When the mixture was shaken for one hour, analogous to tidal mixing in estuaries, only copper desorption from sediments was observed. If the shaking time is increased for more than 3 hours, the copper released from the sediments was resorbed to the remaining solid phases. the higher the contents of mud (91.71%) and total copper (701 mg kg^?1) in sediments, the higher the copper desorption rate (1.86 ppm hr^?1) and copper adsorption rate (0.50 ppm hr^?1) were observed. in sediments containing lower mud (0.80%) and lower copper (43.5 mg kg^?1), the copper desorption and adsorption rates were 0.83 ppm hr^?1 and 0.22 ppm hr^?1, respectively. the interactions among the total copper and copper species in sea water and sediments, chemical and ecological parameters, and copper bioaccumulation in oysters in the Erhjin Chi estuarine and coastal area are also discussed.