焙烧炉筒体结构强度有限元分析

对焙烧炉筒体结构进行有限元建模仿真,考虑热应力、压力和重力对筒体结构受力的影响,计算了焙烧炉关键部位的蠕变疲劳寿命,同时探究进气温度、保温层及对流系数等参数的影响。结果表明:热应力是影响结构强度的关键因素;焙烧炉筒体在许用蠕变变形量为5%的情况下,其使用寿命超过设计寿命;在筒体加热过渡段铺设保温层,降低与外界空气对流和提高进气温度,有利于降低筒体应力。     

城区与郊区PM2.5污染及传输特征差异性

基于云高仪激光雷达、飞机AMDAR数据和常规站点等多源观测数据,并与数值模拟（CAMx-PSAT模型）相结合,以京津冀典型城市——北京城区与郊区（密云）和石家庄城区与郊区（平山）为案例研究区域,对城区和郊区边界层高度差异（ΔPBLH）、地面PM_2.5浓度差异（ΔSurf_PM_2.5）、高空PM_2.5浓度差异（ΔVert_PM_2.5）和传输通量强度及高度分布特征差异进行分析.结果表明,由于人为热源、短波辐射和热力湍流等因素,导致城区年均边界层高度（PBLH）较郊区高8%~29%,且不同季节下城区PBLH月均较郊区高2%（石家庄4月）~47%（北京7月）.由于人为排放、逆温和大气湍流等共同作用,在0~1260 m之间等高度城区年均ρ（PM_2.5）较郊区高0.1（石家庄）~29.7（北京）μg ·m^-3,随高度增加而减小.城区年均总净通量强度远大于郊区,城区表现为流出,郊区表现为流入,是由于城区低压和郊区高压,形成城郊热力环流.北京城区和郊区与周边的年均总净通量强度之和（44.77 t ·d^-1）大于石家庄（34.44 t ·d^-1）.受风速和PM_2.5浓度的影响,在0~1260 m之间,城区和郊区与周边的净通量随离地高度的增加通量强度呈现明显增大趋势,其中1月城区和4月郊区与周边的传输交换对环境影响最为明显.不同季节下城区和郊区最大净通量的强度差异明显,两者相差2.23~4.48倍;但最大净通量强度的高度特征差异较小,主要位于611~1260 m.     

烟草烟雾对室内空气颗粒物浓度的影响

采用电称冲击低压系统(ELPI)将无烟室和吸烟室内的空气颗粒物(0.03～10.00 μm)分成12级,对其粒子数和质量浓度进行测定.结果表明,吸烟室PM0.03～10.00的日平均粒子数和质量浓度分别是无烟室的1.50、1.13倍.烟草烟雾对室内颗粒物粒子数的影响集中在0.03～1.00 μm粒径段;对室内颗粒物质量浓度的影响表现为双模态结构,峰值分别在0.20～0.70、5.00～8.20 μm粒径段.烟草烟雾颗粒物的粒子数和质量浓度随烟雾消散时间的增加而减少,粒径越小,减小的越明显;烟草烟雾颗粒物在室内消散缓慢,会在长时间内造成影响,应引起足够关注.     

Effects of Smoke Emissions from a Charcoal Kiln on the Functioning of Forest Soil Systems: A Microcosm Study

Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.     

气浮过滤法处理印染废水

高效气浮工艺是处理印染废水的有效方法，通过在溶气罐中使用高效填料、优化设计溶气释放器及使用双层快滤，可大大提高处理效果。     

铁合金电炉烟尘的性质与低温固结研究

本文研究了硅铁电炉布袋除尘收集的烟尘性能，烟尘低温固结球团的性能和工艺方法。研究结果表明，硅铁电炉烟尘中ＳｉＯ２ 约占９０ － ９５ ％ ，其它组分含量较低，有利于进行回收利用。烟尘密度小、粒度细、表面活性差、成球性能差。采用添加粘结剂进行自然养护和低温固结处理，均能获得强度较好的固结球团，能够加入铁合金炉回收利用。     

森林消防人员防烟面罩技术探讨及应用

阐述了森林消防防烟面罩的研制及其改进过程，介绍了森林消防防烟面罩的主要技术经济指标及野外应用试验。     

侧吸导烟技术的经济性分析

介绍了侧吸导烟技术的技术背景,分析计算了焦炉装煤烟尘成分及含量,经对该技术的经济效益进行概算后显示,该技术可以有效改善焦炉区及周边环境,每年还可创造可观的经济效益,是一项值得研究推广的技术。     

Review of advances in the thin layer chromatography of pesticides: 2004–2006

Applications of thin layer chromatography and high performance thin layer chromatography for the separation, detection, and qualitative and quantitative determination of pesticides, other agrochemicals, and related compounds are reviewed for the period from July 1, 2004 to November 1, 2006. Analyses are covered for a variety of samples, such as food, crops, biological, environmental, pharmaceuticals, and formulations, and for residues of pesticides of various types, including insecticides, herbicides, and fungicides, belonging to different chemical classes. In addition to references on residue analysis, studies such as pesticide-structure relationships, metabolism, degradation, and lipophilicity are covered, many of which make use of thin layer radiochromatography.     

Results of An Indoor Size Fractionated PM School Sampling Program in Libby, Montana

Libby, Montana is the only PM_2.5 nonattainment area in the western United States with the exceptions of parts of southern California. During January through March 2005, a particulate matter (PM) sampling program was conducted within Libby’s elementary and middle schools to establish baseline indoor PM concentrations before a wood stove change-out program is implemented over the next several years. As part of this program, indoor concentrations of PM mass, organic carbon (OC), and elemental carbon (EC) in five different size fractions (>2.5, 1.0–2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) were measured. Total measured PM mass concentrations were much higher inside the elementary school, with particle size fraction (>2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) concentrations between 2 and 5 times higher when compared to the middle school. The 1.0–2.5 μm fraction had the largest difference between the two sites, with elementary school concentrations nearly 10 times higher than the middle school values. The carbon component for the schools’ indoor PM was found to be predominantly composed of OC. Measured total OC and EC concentrations, as well as concentrations within individual size fractions, were an average of two to five times higher at the elementary school when compared to the middle school. For the ultrafine fraction (<0.25), EC concentrations were similar between each of the schools. Despite the differences in concentrations between the schools at the various fraction levels, the OC/EC ratio was determined to be similar.