火焰脉动在火灾领域相关研究进展

为研究火焰脉动在火灾领域相关研究进展，总结了不同燃料类型的火焰脉动形成机理，较为详细地介绍了火焰脉动现象研究中常用的脉动频率测量方法，列举了LDV、TDLAS、自由基团高频采集等新方法；介绍了池火脉动、射流/羽流气体火脉动在不同燃烧器尺寸，不同外部环境和不同燃料比等影响因素方面的研究内容与进展；对常见的3种不同的火焰脉动模型进行描述和归类；对火焰脉动的规律、机理等在火灾领域的早期识别和检测中的作用、特殊条件对于火焰脉动频率的影响和更加精细的火焰脉动模型的研究等方向提出展望。     

晋牛矿1303综放面采空区注氮方案研究及数值模拟

为了合理设计采空区注氮防灭火方案，以晋牛煤矿1303综放工作面为研究对象，通过在采空区进、回风侧布置束管监测系统，连续测定采空区气体浓度变化，划分采空区自燃“三带”分布区域,并基于采空区自燃“三带”划分标准和数值模拟的方法，利用流体力学COMSOL计算软件，研究不同注氮量、注氮位置下采空区氧化自燃带的分布规律。研究结果表明:注氮量和注氮位置参数的变化，对氧化自燃带上界限的影响并不显著，而对氧化自燃带的下界限影响比较显著；最合适的注氮位置应该在距离切顶线30 m左右，运用Origin软件得出注氮量与氧化自燃带宽度呈指数关系，由拟合式计算出最优注氮量为386 m3/h，此时氧化自燃带的宽度为31.5 m。     

不同煤层煤氧化自燃性实验分析

为研究不同煤层煤自然发火特征的异同性及规律，以淮南矿区1号、3号、6号、13号煤层为研究对象，通过自然发火实验，对不同煤层煤的自然发火期周期、煤样70℃时放热强度和R70值进行分析。研究结果表明:4个不同煤层煤样自燃性由强到弱依次为:3煤>6煤>1煤>13煤；变质程度相近的4个煤层，3煤自然发火期最短，这与煤体中硫分和水分含量高有关；13煤变质程度较高，且前期放热强度、耗氧速率增长缓慢，其自燃性较弱；4个不同煤层煤的耗氧速率、CO，CO2产生率，以及C2H4/C2H6值随煤温升高具有相似的变化规律；煤中CH4气体大量解吸出现于煤温60℃之前，煤中灰分在80~120℃开始逐渐吸热融化，解析和融化均会抑制煤氧接触并且减小煤氧反应放热总量。     

基于响应曲面法的遗煤自燃分析与研究*

为研究高瓦斯易自燃煤层不同供风量、高抽巷抽采流量、低抽巷抽采流量3因素对采空区自燃“三带”分布影响规律，选取阳煤五矿8406工作面为研究对象，在数值模拟研究基础上，采用Design Expert软件进行Box Behnken试验设计，构建采空区氧化升温带宽度在3因素、3水平条件下的二次回归响应曲面模型，并对不同条件下采空区氧化升温带宽度进行预测与分析。结果表明:二次回归方程P值为0.001 6，预测模型显著，模型的失拟项为0.606 3，不显著，回归方程具有统计学意义；当供风量为1 500~2 000 m3/min，低抽流量为450~650 m3/min，高抽流量为100~200 m3/min时，对氧化升温带宽度一次项重要度排序为C（高抽巷抽采流量）>A（供风量）>B（低抽巷抽采流量），二次项重要度排序为AC（供风量和高抽巷抽采流量）>AB（供风量和低抽巷抽采流量）>BC（低抽巷抽采流量和高抽巷抽采流量），且AB,AC,BC之间均无交互作用。     

汽车用聚合物材料火灾燃烧特性研究

为研究车用聚合物材料的燃烧特性，并对材料的火灾危险性进行全方位的评估，采用锥形量热仪，对汽车上常用的ABS，PP-PVC，PVC革-无纺毡以及无纺布-PVC聚合物材料进行分析表征，测得点燃时间、热释放速率、总热释放量、质量损失速率、烟气生成速率等参数。结果表明:ABS材料的点燃危险性相对最低，PVC革-无纺毡材料相对最高；随热辐射强度的增加，各样品的热释放速率和烟气生成速率明显加快；结合热释放速率峰值、均值和总热释放量可知，无纺布-PVC材料的热危险性相对最低；结合烟气生成速率和总烟释放量可知，ABS材料的发烟危害性相对最高，无纺布-PVC的相对最低；综合比较各样品的FGI和FPI值，安全等级由高到低依次为ABS，PP-PVC，PVC革-无纺毡，无纺布-PVC。     

关于锅炉烟气脱硫除尘技术的探讨

目前国内能源结构仍以煤炭为主,大气污染非常的严重,尤其是酸雨和粉尘危害相对较大。在生态文明建设的时代背景下,我们应当加强锅炉脱硫以及除尘技术创新与改造,对燃煤烟尘以及二氧化硫等污染物的排放进行严格控制。本文先对锅炉烟气脱硫除尘现状进行了分析,并在此基础上就电厂锅炉如何进行烟气脱硫与除尘提出了一些观点与认识,以供参考。     

Wood-Specific Polycyclic Aromatic Hydrocarbon (PAH) Patterns in Soot Using Gas Chromatography-Atmospheric Pressure Laser Ionization-Mass Spectrometry (GC-APLI-MS)

If organic matter is burnt, the combustion of wood produces the highest amounts of polycyclic aromatic hydrocarbons (PAHs) compared with other fossil energy sources such as oil, coal, or gas. Emissions from wood combustion are increasingly of special interest due to the rising use of wood as a renewable energy source in residential heating in Europe. To the authors' knowledge, reproducible wood-specific PAH patterns in soot were identified for the first time by use of a sampling interval of only 5 min in this study. The short sampling interval was enabled by the very sensitive analytical method of gas chromatography–atmospheric pressure laser ionization–mass spectrometry (GC-APLI-MS) applied. The analysis of 40 PAH of soot from wood logs of spruce, pine, larch (softwood) and beech, birch, oak (hardwood), and wood pellets, as well as wood briquettes, showed 13.46–250.62 mg/kg for ∑40 PAH and 10.75–177.94 mg/kg for the U.S. Environmental Protection Agency PAH standard (without acenaphthylene and anthracene). Highest concentrations occurred in the samples from birch with bark, beech, and wood briquettes. Indeno[1,2,3-cd]pyrene, naphthalene, and alkylated naphthalenes were also detected. Significant concentrations of the very toxic dibenzopyrenes (up to 11.30 mg/kg) are reported. Softwood soot contained highest amounts of 2–4-ring PAH, followed by hardwood which is in accordance with the presence of highest amounts of abietic acid in softwood, a known precursor of retene and phenanthrene. PAH in soot from five spruce samples from different locations show a mean ∑40 PAH concentration of 13.46 mg/kg (n = 5, minimum 8.03, maximum 23.32 mg/kg, SD = 5.65) and exhibited a typical pattern that differed from all other wood soot samples. The distributions of alkylated naphthalenes of the spruce samples show a bell-shape distribution in contrast to the alkylated phenanthrenes/anthracenes of all samples (except the wood pellets), showing a slope distribution. The data indicate that wood-specific PAH patterns exist and under the applied conditions, spruce logs produced the least toxic soot.     

变压器油池火燃烧规律的实验研究*

为对变压器油池火灾进行准确有效的灭火，研究不同尺寸和不同厚度下变压器油的火灾动力学特征和基本燃烧特性，具体分析变压器油的燃烧过程和变压器油燃烧速率、火焰温度以及辐射热流随油池直径以及厚度的变化规律。结果表明:整个油品的燃烧过程分为预热燃烧阶段、稳定燃烧阶段和火焰熄灭阶段。对于厚度大于10 mm的油池燃烧，稳定阶段的燃烧速率与油层厚度无关，稳定阶段的燃烧速率随着油池直径的增加而增加。同时，变压器油火灾连续火焰区温度接近750 ℃。对于稳定燃烧阶段下的变压器油燃烧，基于辐射通量可得出在燃烧过程中，辐射热量占总燃烧热的占比约为1/3。研究结果可丰富变压器油燃烧的基础数据，为变压器火灾的灭火提供参考。     

Sources of underground CO: Crushing and ambient temperature oxidation of coal

As a harmful gas in underground coal mine, CO seriously threatened the safety of miners. Currently, the spontaneous combustion of residual coal in goaf is generally considered as the main source of underground CO. CO gas is also widely used as an indicator gas in fire prediction in mines. However, high concentrations of CO are also detected in some mines without spontaneous combustion of coal. Therefore, in the paper, with four ranks of coal, we studied other two potential CO sources: crushing and oxidation at ambient temperature. The more completely crushed coal produces more CO. The concentration of generated CO is inversely proportional to moisture content in coal. Therefore, the addition of water can inhibit the generation process of CO during the crushing process of coal. Lignite with low metamorphic grade can be oxidized to produce CO at ambient temperature (25 °C), and anthracite with high coal rank can be only oxidized to produce CO at 60 °C. Infrared spectra indicated that the coal with rich aliphatic hydrocarbons and oxygen-containing functional groups are more susceptible to oxidation at room temperature. Moreover, the smaller particle size of coal is more beneficial to the oxidation at ambient temperature to generate CO. CO generation during coal oxidation is also closely related to the ventilation rate.     

采空区注超临界CO2防灭火试验研究

为研究超临界CO₂注入采空区防灭火的规律,自主研制了产生超临界CO₂和模拟采空区遗煤自燃升温试验系统,得到了不同温压条件下超临界CO₂注入采空区前后不同监测点的温度、O₂和CO浓度变化数据信息。试验结果表明:注入采空区的超临界CO₂发生相变,有序结构急速失序,大量吸收热量,采空区内的煤体、空气温度随时间呈线性快速下降规律,其降温能力是气态N₂的10倍;超临界CO₂在自燃发火煤体中的强渗透扩散特性,使自燃煤体快速惰化,防灭火效率高;停止注入后,小范围回温符合反二次函数特征;高压力超临界CO₂相对于低压条件,防灭火性能更佳;超临界CO₂是1种降温降氧能力显著,且输送性能优良的采空区新型防灭火材料,超临界CO₂防灭火效果优于气态N₂。