Influence of sewage culvert cover plate thickness on dynamic response and damage of the cover plate under gas explosion

In order to address the risk of combustible gas explosions in sewage culverts, a numerical model was established using ANSYS/LS-DYNA software. The model consisted of a culvert and a cover plate, and was used to study the effect of cover plate thickness (ranging from 0.08 m to 0.12 m) on the dynamic response and damage of the structure under explosive loads. The results indicated that, during the loading negative pressure stage, the equivalent stress peak value of the central monitoring unit of the cover plate first increased and then decreased with increasing cover plate thickness. Additionally, the maximum principal stress peak value first decreased and then increased, while the maximum shear stress peak value first increased and then decreased. During the loading positive pressure stage, the maximum principal strain peak value of the monitoring unit decreased overall with increasing cover plate thickness. However, the equivalent plastic strain peak value initially increased and then decreased gradually. The equivalent strain indicated that plastic damage occurred in the cover plate. Beyond a thickness of 0.11 m, increasing the cover thickness did not appear to enhance its resistance to plastic damage. The damage analysis revealed that as cover plate thickness increased, the peak displacement and velocity of the monitoring unit continued to decrease, while the overall stability and explosive resistance of the cover plate increased. Additionally, the number of damaged fragments decreased. However, once the cover plate thickness reached 0.11 m, the bonding performance of the reinforced concrete structure had been fully developed, increasing the thickness of the cover plate no longer had a significant impact on the explosive resistance of the cover plate.     

Wall losses of oxygenated volatile organic compounds from oxidation of toluene: Effects of chamber volume and relative humidity

Vapor wall losses can affect the yields of secondary organic aerosol. The effects of surface-to-volume (S/V) ratio and relative humidity (RH) on the vapor-wall interactions were investigated in this study. The oxygenated volatile organic compounds (OVOCs) were generated from toluene-H₂O₂ irradiations. The average gas to wall loss rate constant (k_gw) of OVOCs in a 400 L reactor (S/V = 7.5 m⁻¹) is 2.47 (2.41 under humid conditions) times higher than that in a 5000 L reactor (S/V = 3.6 m⁻¹) under dry conditions. In contrast, the average desorption rate constant (k_wg) of OVOCs in 400 L reactor is only 1.37 (1.20 under humid conditions) times higher than that in 5000 L reactor under dry conditions. It shows that increasing the S/V ratio can promote the wall losses of OVOCs. By contrast, the RH effect on k_gw is not prominent. The average k_gw value under humid conditions is almost the same as under dry conditions in the 400 L (5000 L) reactor. However, increasing RH can decrease the desorption rates. The average k_wg value under dry conditions is 1.45 (1.27) times higher than that under humid conditions in the 400 L (5000 L) reactor. The high RH can increase the partitioning equilibrium timescales and enhance the wall losses of OVOCs.     

Prenatal diagnosis of omphalocele and gastroschisis by ultrasonography

As the use of ultrasonography has become a routine procedure in the care of pregnant women, fetal congenital malformations have been frequently diagnosed prenatally. During a 4-year period abdominal wall defects (AWD) were diagnosed in 14 cases, five were gastroschises and nine were omphaloceles, seven females and seven males. Concomitant malformations were present in one case of gastroschisis and in five cases of omphalocele. Eleven AWD's were diagnosed in the second trimester and six pregnancies were interrupted. Eight children with AWD were born; two boys with omphalocele and one girl and one boy with gastroschisis are still alive. Alpha-fetoprotein was determined in amniotic fluid in 11 cases and also in maternal serum prior to the amniocentesis in eight cases. Chromosomal investigations were performed in 13 cases, 11 on amniotic fluid cells and two on lymphocytes from a blood sample made postnatally. Two abnormal karyotypes, 47,XX + 18 were found.     

聚磷生物膜的快速启动及微生物特性研究

在同步去除并富集磷的基础上,探究采用前期不排泥、后期排泥的挂膜方式对聚磷生物膜反应器的运行效能、微生物特征及群落结构的影响.结果表明,经过驯化运行,聚磷生物膜的蓄磷能力明显提升.在挂膜阶段,生物膜厚度及EPS含量出现一定程度的增长;PN/PS上升至3.12,PN/PS比值增加有利于微生物粘附在填料上.在好氧出水达标的情况下,富集液中磷酸盐浓度提升至89.5 mg·L~(-1),达到了鸟粪石回收标准.高通量测序结果表明,经过富集培养,微生物群落多样性呈下降趋势,群落组成变化明显.优势菌门为变形菌门(Proteobacteria),其丰度从33.6%增长至75.3%;反应器中的聚磷菌属丰度明显增加,从11.8%上升至23.2%,红环菌属(Rhodocyclaceae)、UKL 13-1为反应器中的优势聚磷菌.     

基于改进灰色模型的管壁蜡沉积厚度预测研究

为对含蜡原油管道中的蜡沉积厚度进行准确预测,在函数cot(x2)变换的基础上,结合平移变换思想,利用cot(x2+c)变换建立新的改进GM(1,1)模型。以现场管道结蜡数据和室内环道结蜡数据为例,对比改进GM(1,1)模型、基于函数cot(x2)变换建立的GM(1,1)模型及传统GM(1,1)模型之间的预测精度,并分析平移量c对改进GM(1,1)模型预测精度的影响。结果表明:改进GM(1,1)模型的预测精度最高,其次是基于函数cot(x2)变换建立的GM(1,1)模型,而传统GM(1,1)模型的预测精度最低;随着平移量的增大,改进GM(1,1)模型的平均相对预测误差呈现出先减小后增大的趋势,因此合理的平移量有助于模型精度的提高。应用改进GM(1,1)模型来预测管道蜡沉积厚度是可行的,该方法可为含蜡原油管道蜡沉积厚度的准确预测提供参考和借鉴。     

On the determination of the laminar burning velocity from closed vessel gas explosions

A methodology to determine the laminar burning velocity from closed vessel gas explosions is explored. Unlike other methods which have been used to measure burning velocities from closed vessel explosions, this approach belongs to the category which does not involve observation of a rapidly moving flame front. Only the pressure–time curve is required as experimental input. To verify the methodology, initially quiescent methane–air mixtures were ignited in a 20-l explosion sphere and the equivalence ratio was varied from 0.67 to 1.36. The behavior of the pressure in the vessel was measured as a function of time and two integral balance models, namely, the thin-flame and the three-zone model, were fitted to determine the laminar burning velocity. Data on the laminar burning velocity as a function of equivalence ratio, pressure and temperature, measured by a variety of other methods have been collected from the literature to enable a comparison. Empirical correlations for the effect of pressure and temperature on the laminar burning velocity have been reviewed and two were selected to be used in conjunction with the thin-flame model. For the three-zone model, a set of coupled correlations has been derived to describe the effect of pressure and temperature on the laminar burning velocity and the laminar flame thickness. Our laminar burning velocities are seen to fall within the band of data from the period 1953–2003. A comparison with recent data from the period 1994–2003 shows that our results are 5–10% higher than the laminar burning velocities which are currently believed to be the correct ones for methane–air mixtures. Based on this observation it is concluded that the methodology described in this work should only be used under circumstances where more accurate methods can not be applied.     

初论环境信息污染及预防

从SARS所引发的社会现象分析,首次从环境角度对信息污染进行探讨,提出了环境信息污染的含义及特征。并针对环境信息污染的潜在危害性,论述治理环境信息污染应以预防为主。建议政府和个人逐步通过建立“信息墙”,使信息更加有序、有条理,以此来预防和减少环境信息污染。     

降膜法脱氨氮的技术可行性及影响因素浅析

对煤气化废水的特性和处理现状进行了阐述和分析,总结了降膜技术在煤气化高氨氮废水中的脱氮效果和液泛气速、膜厚、pH值、温度的关系。研究表明,降膜技术可将氨氮去除率提高到95%以上,同时降低调整pH值的药剂成本,并有效缓解结垢现象,在类似工业废水处理项目中具有较好的推广应用价值。     

基于热湿交换理论的巷道风流温、湿度影响因素研究

为了研究巷道风流参数的影响因素、预测风流温湿度的变化规律,结合热湿交换理论,建立了风流与围岩壁面之间热湿交换的数学模型,以及贴体坐标系下围岩内部温度场的导热微分方程;利用数值方法,将围岩内部的导热问题与影响风流参数变化的热湿交换问题耦合起来,并以大柳塔煤矿52505综采工作面为例进行计算,得到了与实测参数较为一致的模拟结果,验证了该数值方法的有效性。研究结果表明:风流温度受原始岩温、入风流温度、局部热源强度等因素的影响,风流相对湿度与入风流温、湿度以及井下湿源的数量和强度有关;巷道壁温作为将围岩温度场与风流参数之间关联起来的主要因素,对模拟结果影响较大,其数值取决于壁面与风流之间热湿交换以及围岩原始岩温。