丙烯腈生产废水中聚合物的资源化利用

以丙烯腈生产废水中的丙烯腈低聚物为原料制备聚丙烯酰胺。通过正交实验考察了水解反应条件和交联反应条件对反应的影响。FTIR表征结果显示,丙烯腈低聚物中的氰基已完全水解为酰胺基,产物聚丙烯酰胺中含有酰胺基和羧基。实验结果表明,在自来水加入量100 m L、水解反应温度95℃、m(Na OH)∶m(丙烯腈低聚物)=2.0、水解反应时间3 h的最佳水解反应条件,交联反应温度60℃、质量分数37%~40%的甲醛加入量6 m L、交联反应时间2 h的最佳交联反应条件下,处理20 g丙烯腈低聚物,可得到产物聚丙烯酰胺14.50 g,聚丙烯酰胺的水解度为21.1%、相对分子质量为2.7×106。产品性能满足Q/SH 0046—2007《钻井液用聚丙烯酰胺技术要求》中部分水解聚丙烯酰胺的性能要求。     

Ammonium nitrate thermal decomposition with additives

Runaway reactions present a potentially serious threat to the chemical process industry and the community; such reactions occur time and time again often with devastating consequences. The main objective of this research is to study the root causes associated with ammonium nitrate (AN) explosions during storage. The research focuses on AN fertilizers and studies the effects of different types of fertilizer compatible additives on AN thermal decomposition. Reactive Systems Screening Tool (RSST) has been used for reactivity evaluation and to better understand the mechanisms that result in explosion hazards. The results obtained from this tool have been reported in terms of parameters such as “onset” temperature, rate of temperature and pressure rise and maximum temperature. The runaway behavior of AN has been studied as a solid and solution in water. The effect of additives such as sodium sulfate (Na₂SO₄) and potassium chloride (KCl) has also been studied. Multiple tests have been conducted to determine the characteristics of AN decomposition accurately. The results show that the presence of sodium sulfate can increase the “onset” temperature of AN decomposition thus acting as AN thermal decomposition inhibitor, while potassium chloride tends to decrease the “onset” temperature thus acting as AN thermal decomposition promoter.     

过硫酸盐缓释材料释放过程模型构建

为预测评估过硫酸盐缓释材料的释放性能,对释放过程模型的构建以及模型的验证进行了研究。借助微积分思想,从材料体的概化分割、初始条件设定、每个小单元的状态标定、各个小单元中过硫酸钾的迁移变化量以及材料最外层释放过硫酸盐的量5个方面构建过硫酸盐缓释材料释放模型,利用Excel-VBA编程实现其释放过程模拟。采用欧盟标准NEN7375测试过硫酸盐缓释材料释放性能并获得模型参数。通过输入相关模型参数得到过硫酸盐动态迁移过程及其释放特征曲线,并利用实测数据与模拟数据进行拟合校验。结果表明,模型模拟值与实测值拟合较好,平均误差为1.88%,表明该模型设计合理,能够准确模拟过硫酸盐缓释材料释放过程,可作为缓释材料优化设计工具。     

钾对龙眼产量和品质的影响

为了提高龙眼产量，提高钾肥的施肥效益，于1993～1995年进行龙眼果园不同钾肥用量的施肥试验．结果表明，龙眼在施用氮碗肥及补充土壤缺乏的中微量元素养分的基础上，增施钾肥可增大果型、提高单果重，显著增加果实产量，并可改善果实品质；龙眼增施钾肥有明显的经济效益．提出龙眼适宜的施钾量为：每株每产50kg鲜果树面年施K2O1.2kg．     

碱性矿化水灌溉对土壤溶质运移的影响

经过连续几年的灌溉试验可知,应用2.5 g稬-1以下的低矿化水灌溉是安全的,超过此值土壤积盐和碱化明显。灌溉后,土壤中溶质运移受多因素影响。在阳离子分布中,水平方向Na+随灌溉水矿化度增大而增多,Ca2+、Mg2+变化不大;土壤剖面上,从表层至60 cm土层,先以Ca2+、Mg2+为主,过渡到Na+、Ca2+、Mg2+共同占优,再发展为以Na+占优。阴离子的分布中,水平方向,随灌溉水矿化度增大HCO3-增多;土壤剖面上,从表向里,先以Cl-或SO42-为主,过渡到C1-、SO42-、HCO3-均分局面,再发展以HCO3-占优。灌溉后土壤pH值在0~20 cm变化不明显,大于20 cm土层有一定增加。土壤中的SAR和ESP均以大于1.5 g稬-1的碱性低矿化水灌溉后增加明显,碱化层由下向上抬升,小麦田碱化速度快于玉米田。     

乳化剂OP和邻菲啰啉存在下硫氰酸钾分光光度法测定土壤有效铁和植物中的铁

在硫酸介质中，在非离子表面活性剂乳化剂ＯＰ和邻菲啉共同存在下，铁（Ⅲ）与硫氰酸钾形成红色配合物，其最大吸收波长为５２２ｎｍ，表观摩尔吸光系数为２．０７…１０￣４Ｌ／ｍｏｌ．ｃｍ，铁（Ⅲ）含量在０—５０μｇ／２５ｍｌ范围内符合比耳定律．该法操作简便、快速．选择性好，应用于土壤有效铁和植物中铁的测定．结果令人满意．     

焦亚硫酸钠对大鼠背根节神经元钾电流的影响

应用全细胞膜片钳技术,研究SO2体内衍生物和食品添加剂———焦亚硫酸钠(sodiummetabisulfite,SMB)对大鼠背根节(DRG)神经元瞬间外向钾电流(TOCs)和延迟整流钾电流(IK)的影响.结果表明,SMB可增大TOCs和IK,且具剂量依赖性和电压依赖性.10μmolL-1的SMB不影响TOCs的激活过程,给药前后TOCs的半数激活电压为(3.15±2.29)mV和(4.72±1.92)mV(N=8,P>0.05),不改变其斜率;但10μmolL-1的SMB却非常显著地影响TOCs的失活过程,给药前后其半数失活电压分别为(-53.6±0.45)mV和(-38.85±0.68)mV(N=8,P<0.01),也不改变其斜率.10μmolL-1的SMB显著提前IK的激活过程,给药前后IK的半数激活电压为(-11.98±3.50)mV和(-33.21±5.67)mV(N=8,P<0.01),不改变其斜率.SMB显著增大TOCs和IK,使IK的激活过程提前,抑制TOCs的失活过程,从而导致细胞内K 通过K 通道外流增加,进而可能对DRG神经元功能产生不利影响.图6参16     

有机磷农药废水碱性水解生物处理技术

本文报道了碱性水解和生物氧化两步法,处理有机磷农药-乐果、甲胺磷生产废水的研究结果.废水经碱性水解后,COD和有机磷浓度基本不变,但可生化性有明显改善.在遵循常规生物处理必须满足的条件下,碱性废水进一步用间歇或连续活性污泥法处理.COD去除率90%左右,有机磷去除率85%以上,有机磷含量以毒性磷计小于0.5mg/L.深入考察了碱解剂种类、水溶液的pH和温度等各种因素对碱性水解的影响,结果表明:NaOH作碱解剂时的碱解速率比Ca(OH),提高28%;碱解速率随pH和温度的升高而增大,pH每增加一个单位,碱解速率增加2～11倍;温度每升高10℃,碱解速率增加2～5倍.     

Nutrients Can Enhance Phytoremediation of Copper-Polluted Soil by Indian Mustard

An orthogonally designed experiment was conducted to study the single and combined effects of N, P and K on phytoremediation of Cu-polluted soil by Indian mustard. Addition of fertilizer N and P significantly increased Indian mustard shoot yield. Two high treatments combined with N resulted in the highest yields, followed by low-P combined with N. In contrast, high P with no N gave no yield increase and K had no effect on yield of Indian mustard. Nitrogen and P increased the amount of chlorophyll in the leaves, indicating that the yield increases were due to enhanced photosynthesis. Nitrogen application had no effect on plant Cu concentrations but addition of P slightly decreased plant Cu concentrations, likely a dilution effect resulting from the increase in yield. Among the treatments, N and P applied at 100 and 200 mg kg^–1 respectively with no K application resulted in the highest Cu uptake. Thus, a combination of low N and high P produced a yield increase in Indian mustard that was more than adequate to compensate for a slight decrease in Cu concentration, resulting in the highest Cu removal from the contaminated soil.