基于红外热成像的隧道火焰检测技术研究

精准的火焰检测是有效避免火灾发生的关键,针对传统的火灾探测算法在公路隧道等大空间环境中存在及时性与准确性相互制约的问题,通过研究隧道火焰初期在图像中呈现的静态和动态特征,提出了一种基于红外热成像的公路隧道火灾初期火焰检测方法。利用温度阈值获取疑似火焰区域,根据红外图像在引导滤波器作用下降噪,同时利用区域增长法分割疑似火焰区域;从疑似区域中提取的特征值构成特征向量,进行数据归一化提高SVM收敛速度;利用人工蜂群算法优化参数。结果表明：ABC-SVM能够实现公路隧道火灾初期的火焰识别,检测正确率相较于RBF方法提升了2.26%,运行时间缩短了2.29 ms;检测正确率相较于SVM方法提升了0.87%,运行时间缩短了2.22 ms。本方法可以对初期隧道火灾进行快速、有效检测,并有良好的环境适用性。     

固相萃取和高效液相色谱联用测定污水中的五氯苯酚

采用固相萃取和高效液相色谱相结合的方法对污水中五氯苯酚的含量进行定量检测。结果表明,污水的pH值为4,流速控制在4mL/L以内,C18固相萃取柱对五氯苯酚有良好的吸附保留性能,以2mL的甲醇洗脱,洗脱效率在85%~95%之间。与传统的液液萃取相比,固相萃取的优势在于操作时间缩短、有机溶剂的使用量减少。     

Experimental investigation on extinguishing performance of a novel nanocomposite for gaseous fires

A novel nanocomposite was synthesized by incorporating three different types of flame-retardants and its extinguishing performance was tested for gaseous fires. The nanocomposite consists of the inorganic magnesium hydroxide (MH) nanoparticles as the dominant component, the nitrogen-based melamine cyanurate (MCA), and the phosphorus-based ODOPB. The wet mixing, dry mixing, and ultrasonic agitation were employed in the preparation process to enhance the homogeneity of the nanocomposite. The prepared powders were characterized using a series of analytical instruments including X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravity analyzer (TGA), and differential scanning calorimeter (DSC). The efficiency of various samples in extinguishing gaseous fires was investigated in a lab-scale extinguishing system. The fire extinguishing tests indicated that the nanocomposite is considerably more effective in fire extinguishing than other powders in terms of extinction time and agent mass consumed. The fire extinction time of nanocomposite was 45.2% shorter than that of commercial ABC-MAP powder. Furthermore, the consumed amount of nanocomposite was 63.2% less than that of commercial powder. In addition, the order of extinguishing mass concentrations was as follows: the novel nanocomposite (103.7 g/m³) < MH/MCA (148.1 g/m³) < MH/ODOPB (155.6 g/m³) < MH (170.4 g/m³) < commercial ABC powder (281.5 g/m³) < MCA/ODOPB (384.1 g/m³). The fire suppression mechanisms of the nanocomposite were also discussed. It was inferred that the extinguishing mechanism of nanocomposite comprised of simultaneous chemical and physical inhibition actions involving chemical inhibition action, cooling action, and asphyxiation action. This study provides a promising attempt to gain benefits from the striking features of nanotechnology and flame-retardants in extinguishing gaseous fires.     

The evolution of flame length for the oil tank fire with different top cover widths and lip heights

This study presents a quantitative analysis and interpretation of the variation in oil tank fire flame lengths for different oil tank sizes, top cover widths, and horizontal air flow velocities. The experimental results show that, at first, the flame length rises slowly with an increase in air flow speed. Then, once over a critical speed (0.6 m/s), the flame length decreases significantly with a further increase in air flow speed. Based on the characteristic length, a new dimensionless heat release rate is obtained, allowing the correlation between flame length, air flow speed, and dimensionless heat release rate to be calculated, which can be used to predict the flame length of an oil tank fire under different air flow speeds, lip heights, and cover widths.     

燃烧假人测试系统及其应用前景

燃烧假人测试系统是国际公认的定量评估防护装备阻燃性能的专用设备，本文主要介绍了燃烧假人测试系统的研究现状、系统构成、技术体系及应用前景。     

气相色谱——火焰光度法测定废水中黄磷的方法研究

研究了以苯为萃取剂，用气相色谱－－火焰光度法测定废水中的微量黄磷。结果色谱分离良好，萃取率大于９４％，水样易于保存，溶剂和杂质不干扰测定，水样加标回收率大于８８．４８％，精密度重复测定的变异系数不大于３．２％，定性检出限为２μｇ／Ｌ，定性检出限为６μｇ／Ｌ。     

地表水中痕量金属元素的原子吸收法测定

采用单缝石英管技术作为火焰原子化器的原子捕集阱,以火焰法测定地表水中Cu、Pb、Zn、Cd等痕量元素,进一步提高了石英管法的灵敏度。依上述元素的顺序,其方法的最低检出浓度分别为4.0、10.0、1.0、1.0μg·l~(-1);对不同浓度标准溶液的精密度实验,其变异系数分别为0.5％、0.6％、1.6％、0.4％;对地表水加标回收率试验结果分别为95％—106％、100％—105％、95％—109％、84％—99％。     

灰化-火焰原子吸收法测定人发中的金属元素

讨论了人发中元素测定的前处理条件，并采用灰化－火焰原子吸收法测定了人发中锌，铜，铁，钙和镁５种金属元素的含量。     

PBDF and PBDD from the combustion of bromine containing flame retarded polymers: A survey

The formation of polybrominated dibenzofurans (PBDF) and dibenzodioxins (PBDD) during the pyrolysis of different polymers containing brominated organic flame retardants was investigated. The pyrolyses were conducted at two different temperatures (600°C and 800°C) using three different oven configurations. Both the pyrolysis gases and the solid residues were analysed for PBDF and PBDD.

PBDF were found in almost all samples, but both the concentration and the degree of bromination varied greatly. The largest yields of PBDF in the percent range were measured in the pyrolysis products of polymers containing brominated diphenyl ethers. The other flame retardants generally yielded only a few ppm of PBDF. PBDD are formed only in a few samples and related to the PBDF in very low concentrations.     

交联壳聚糖富集分离火焰原子吸收法测定环境样品中微量锰

提出了交联壳聚糖 (CCTS)分离富集火焰原子吸收法测定环境样品中微量锰的新方法。研究了富集的最佳条件及洗脱方法 ;考察了共存元素的影响。方法的检出限为 2 .6μg/L ,RSD为 2 .9% ,用于牡蛎和人发标样中微量锰的测定 ,结果满意。