Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

膜曝气生物膜反应器生物膜影响因素分析

膜曝气生物膜反应器（MABR）是一种利用透气膜进行曝气，可以实现同步硝化反硝化的污水生物处理新工艺。本文阐述了膜曝气生物反应器生物膜的原理和特点，总结了国内外在该领域的研究成果，重点介绍了C／N、氧气压力、流速、生物膜厚度、温度和pH对生物膜性能的影响。     

改性TiO_2光催化降解三苯甲烷类污染物

以硫酸钛为原料采用水热法制备了掺Fe3＋TiO2晶体粉末,采用X射线衍射仪（XRD）对样品的结构进行了表征。在可见光条件下,用溴酚蓝、甲基绿、甲基蓝、孔雀石绿、甲基紫和碱性品红等6种典型三苯甲烷类化合物为目标降解物,研究了以自制的掺Fe3＋TiO2晶体粉末对它们的催化降解作用。实验结果表明,制备的掺Fe3＋TiO2晶体属于锐钛矿型。6种化合物的光催化降解反应遵循拟一级动力学规律,且可用Langmuir-Hinshelwood（L-H）动力学模型描述,其表观反应速度常数（k）的大小顺序为：溴酚蓝〈甲基绿〈甲基蓝〈孔雀石绿〈甲基紫〈碱性品红,大小变化次序与其半衰期t1/2成反比,并从分子结构上对它们的降解规律进行定性解释。     

Fe3O4纳米磁性微粒对全氟辛烷磺酸盐的吸附

采用共沉淀法合成Fe3O4纳米磁性颗粒,用透射电子显微镜(TEM)、X射线衍射仪(XRD)以及振动样品磁强计(VSM)对Fe3O4纳米磁性颗粒的粒径、形貌和磁性进行表征并研究Fe3O4纳米磁性微粒对全氟辛磺酸盐的吸附。结果表明:在PFOS初始浓度4 mg/L,pH为3,反应时间24 h,Fe3O4纳米磁性微粒投加量1.25 g/L,对全氟辛磺酸盐去除率达到90%。Fe3O4纳米磁性微粒对PFOS的吸附符合Freundlich吸附方程。     

3种运行模式下CAST工艺脱氮性能

以模拟城市污水为处理对象，采用循环式活性污泥法（CAST）反应器，对3种运行模式（M1：常规模式，M2：缺氧好氧模式、M3：缺氧好氧交替模式）下系统的脱氮性能进行了研究，比较了各模式下CAST反应器的氨氮和总氮的去除效率，并对各模式下典型周期内氮基质浓度变化进行了考察，以确定系统的脱氮模式。结果表明，在氨氮去除不成为限制条件（去除率〉90％）的条件下，3种运行模式下系统总氮的平均去除率分别为67．3％、70．6％和82．4％，以缺氧好氧交替模式下的最高；M1、M2和M3均可实现亚硝酸型硝化，但随着温度的升高，亚硝酸型硝化逐渐消失。静态实验分析表明，3种模式下系统的氨氧化速率大小次序为：vN：M1〉vN：M2〉vN：M3，反硝化速率大小次序为：vDN,M2〉vDN,M3〉vDN,M1。     

烟气同时脱硫脱硝化学反应的可能性分析

根据烟气气体组分情况，将可能发生的化学反应方程式进行筛选，确定独立反应个数。通过热力学计算得到了标准状态下热力学函数值，进而求得了不同温度下的热力学性质。通过标准生成自由焓、标准吉布斯自由能变、标准熵变的计算，分析了烟气同时脱硫、脱硝中发生化学反应的可能性，为烟气同时脱硫、脱硝动力学理论的研究打下了基础。     

降低超高压输电线路电晕噪声的对策研究

从电力金具的选型、设计、生产、运输、安装和优化改造等环节提出了降低超高压输电线路电晕噪声的对策措施。同时，通过对超高压输电线路铁塔可听噪声和金具电晕放电情况的检测，验证优化改造金具的降噪效果，查找金具安装的缺陷和漏洞，为金具制造和设计、预防电晕措施的选择及电力金具的改良、安装和运行等方面提供决策和参考依据。     

六自由度气锤振动技术与电磁斜面振动技术比较

六自由度气锤振动与电磁斜面振动是两种模拟产品三轴振动的振动技术。由于两种振动技术的机理不同，其对样品的振动影响也会有区别。本文研究讨论两种不同振动技术的不同特点，以及对不同产品的振动效果别，我们可以根据样品特点和测试需求，选择更合适的震动技术。     

纳米铝粉对烟火药剂热安全性影响研究

为研究铝粉纳米化后对烟火药剂性能的影响，本文将普通铝粉和纳米铝粉分别与氯酸钾、硫粉按照零氧平衡的同一配比（17％AL＋63％KClO3＋20％S）配成的烟火药剂进行ARC热分析对比试验发现，含纳米铝粉的烟火药剂热分解的初始反应温度降低，反应到达最大温升速率所需的时间延长，反应所能达到的最高压力降低。这说明纳米铝粉的加入在加速其反应进程的同时，可有效地降低其反应的激烈程度和危险性，即铝粉纳米化后可以有效的改善烟火药剂的性能，提高其安全性。     

Cesium isotope ratios as indicators of nuclear power plant operations

There are multiple paths by which radioactive cesium can reach the effluent from reactor operations. The radioactive ¹³⁵Cs/¹³⁷Cs ratios are controlled by these paths. In an effort to better understand the origin of this radiation, these ¹³⁵Cs/¹³⁷Cs ratios in effluents from three power reactor sites have been measured in offsite samples. These ratios are different from global fallout by up to six fold and as such cannot have a significant component from this source. A cesium ratio for a sample collected outside of the plant boundary provides integration over the operating life of the reactor. A sample collected inside the plant at any given time can be much different from this lifetime ratio. The measured cesium ratios vary significantly for the three reactors and indicate that the multiple paths have widely varying levels of contributions. There are too many ways these isotopes can fractionate to be useful for quantitative evaluations of operating parameters in an offsite sample, although it may be possible to obtain limited qualitative information for an onsite sample.