Effect of chemophytostabilization practices on arbuscular mycorrhiza colonization of Deschampsia cespitosa ecotype Waryński at different soil depths

The effects of chemophytostabilization practices on arbuscular mycorrhiza (AM) of Deschampsia cespitosa roots at different depths in soils highly contaminated with heavy metals were studied in field trials. Mycorrhizal parameters, including frequency of mycorrhization, intensity of root cortex colonization and arbuscule abundance were studied. Correlations between concentration of bioavailable Cd, Zn, Pb and Cu in soil and mycorrhizal parameters were estimated. An increase in AM colonization with increasing soil depth was observed in soils with spontaneously growing D. cespitosa. A positive effect of chemophytostabilization amendments (calcium phosphate, lignite) on AM colonization was found in the soil layers to which the amendments were applied. Negative correlation coefficients between mycorrhizal parameters and concentration of bioavailable Cd and Zn in soil were obtained. Our results demonstrated that chemophytostabilization practices enhance AM colonization in D. cespitosa roots, even in soils fertilized with high rates of phosphorus.     

Crown condition dynamics of oak in southern Sweden 1988’999

Crown defoliation of oak (Quercus robur and Q. petraea) was analysed in 808 trees during three forest condition surveys (1988, 1993, and 1999) in the southern Sweden. From 1988 to 1999 crown defoliation increased by more than 20%. Changes in crown defoliation were related to the pH in the upper 20–30 cm of the mineral soils, which was closely connected to other measures of soil fertility (cation exchange capacity, CEC and C/N ratio). Trees growing on soils with a high pH (≥4.00, in BaCl₂ filtrate), high CEC and low C/N ratio had significantly lower crown defoliation than trees growing on more acid soils (pH <4.00), indicating that less favourable soil conditions may further enhance oak decline. Age did not differentiate trees with respect to crown defoliation, indicating that decline in crown condition was not due to an age-related increase in crown transparency. Considering only trees younger than 100 years, a significant interaction was observed between changes in crown defoliation and soil pH. Trees younger than 100 years old growing on more acidic soils had a greater increase in crown transparency than trees on more basic soils between 1988 and 1999. Trees ≥100 years old had significantly higher defoliation on more acidic than on more basic soils, however defoliation dynamics of these trees over 1988–99 was not related to soil acidity. Two biotic agents (insect and fungal leaf infections) evaluated in this study did not prove to be important drivers of defoliation dynamics.     

Characterization of an urban landfill soil by using physicochemical analysis and solid phase microextraction (SPME)—GC/MS

We have aimed at characterizing top soil samples taken in-situ from five different locations of the unregulated dumping site in Eskişehir/Turkey for a period of six months. The study is the first attempt in the city and in Turkey, regarding particularly the SPME (Solid Phase Microextraction Technique) analysis method utilized. A comprehensive research has been conducted to produce critical soil data to be used for indicating current risks as well as the urgency of rehabilitating the site and establishing a sanitary landfill in the site. Conventional physicochemical analytical methods and SPME technique were used to analyze the samples. Physicochemical analyses were performed for determining the pH, total dried matter, volatile matter, total nitrogen, phosphorus, macro elements and heavy metals. Meteorological data were also recorded for the same period. SPSS.10.0 statistical program was used to determine the correlation between meteorological data and physicochemical analysis results. Mean values were used in the correlation analyses. These data indicated that the air temperature and precipitation have significant effects on soil characteristics. SPME, coupled with GC/MS, was used to identify eighty six volatile and semi-volatile organic compounds contained in soil samples. The samples were extracted by headspace SPME with heating (δHS-SPME). SPME analyses were conducted using a commercially available polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber having a film thickness of 65 μm (Supelco) as a capture medium. The experimentally optimized headspace sampling conditions were arranged (15 min. at 50^˚C) before a 30 min. sampling period.     

Estimation Of Selenium Concentration In Shallow Groundwater In Alluvial Fan Area In Tsukui, Central Japan

Total selenium (Se) and water-soluble Se in soil, and Se in a shallow groundwater were hydrogeochemically researched in an alluvial fan area in Tsukui, Central Japan. The water-soluble Se was estimated at average level of 2.6 ± 1.2μg Se kg⁻¹ dry soil (± SD, n = 25), showing less than 1% of the total Se (349–508μg Se kg⁻¹ dry soil) in soil. The monthly Se concentration in groundwater was average 2.2μg,L⁻¹, ranging 1.6–2.4μg,L⁻¹ during 2001–2003. The Se in groundwater significantly decreased with increasing groundwater level after rainfall. This result indicated that Se-bearing water percolated with relatively low Se concentration through the soil layer. According to our prediction model of linear regression curve on the observation data, Se concentration in the groundwater was estimated to be increasing with the very low rate of 4.35 × 10⁻³μg Se L⁻¹,yr⁻¹. The hydrogeochemical research and the result of the prediction model showed that any explosive increase of Se will hardly occur in this groundwater without an anthropogenic Se contamination.     

Lead and polycyclic aromatic hydrocarbons (PAHs) in surface soil from day care centres in the city of Bergen, Norway

Surface soil (0-2cm) quality in 87 day care centres in the city of Bergen, Norway has been studied. Approximately 45% of the day care centres contained Pb and PAH values above recommended action levels. There are clear variations between different areas of the city. The old central part of the city hosts most of the contaminated day care centres. In suburban areas most of the day care centres have Pb and PAH concentrations below action levels. City fires, gas work emission, lead-based paint, and traffic are probably important anthropogenic contamination sources, together with uncontrolled transportation of soil from contaminated to clean areas. Geological or other natural sources are probably not an important contributor to the high levels of lead and PAH.     

Collateral benefits and hidden hazards of soil arsenic during abatement assessment of residential lead hazards

Abatement of soil-lead hazards may also reduce human exposure to other soil toxins, thereby achieving significant collateral benefits that are not accounted for today. This proposition was tested with the specific case of soil-arsenic, where 1726 residential soil samples were collected and analyzed for lead and arsenic. The study found that these two toxins coexisted in most samples, but their concentrations were weakly correlated, reflecting the differing sources for each toxin. Collateral benefits of 9% would be achieved during abatement of the lead-contaminated soils having elevated arsenic concentrations. However, a hidden hazard of 16% was observed by overlooking elevated arsenic concentrations in soils having lead concentrations not requiring abatement. This study recommends that soil samples collected under HUD programs should be collected from areas of lead and arsenic deposition and tested for arsenic as well as lead, and that soil abatement decisions consider soil-arsenic as well as soil-lead guidelines.     

Availability and bio-accessibility of metals in the clay fraction of urban soils of Sevilla

The availability of Cd, Cr, Cu, Ni, Mn, Pb and Zn present in the finest size particles of urban soils is studied by comparing the concentrations in the clay fraction with those extracted from the whole soil by either single-extraction or sequential extraction method. Many metals are preferentially present in the finest particles as compared to coarser fractions. This is true for most metals studied, except Mn and, perhaps, Cd. Those metals present in the clay fraction are often in easily bio-accessible forms, especially Cu, Pb and Zn. The results suggest that bio-accessible forms of these three metals are distributed among the three sequential fractions, and even the fraction considered as ‘residual’ is also bio-accessible to a significant extent. The statistical analysis shows some distinctions among metals that are compared to the ‘urban’, ‘natural’, or intermediate behaviour of the various metals as proposed earlier in the literature.     

Multiple batch extraction test to estimate contaminant release parameters using a Bayesian approach

Industrial activities produce vast amounts of weakly contaminated materials which are commonly reused as filling materials on natural ground. There is a strong demand to define guidelines for the application of these materials, to estimate the leaching potential of contaminants from the materials, and to assess the potential hazard for groundwater pollution. We present a multiple batch experiment, where measurements of liquid-phase concentrations at varying liquid/solid ratios are used to estimate the total mass of contaminant that can be extracted from a contaminated material with a mild extractant like water. Furthermore, the experiment yields estimates of the isotherm describing the partitioning of the contaminant between the solid and liquid phases, and a concentration that might be expected under soil hydraulic conditions representative for the field situation. Model parameters are estimated from liquid-phase concentrations within a Bayesian framework by applying the Shuffled Complex Evolution Metropolis Algorithm (SCEM-UA), an efficient Markov Chain Monte Carlo sampler. A sensitivity analysis and inversions of synthetically generated data corrupted with noise show the general suitability of the proposed method. An uncertainty analysis for model parameters and model predictions shows the expected accuracy of the estimates. An application to concentration measurements obtained from a multiple batch extraction test illustrates the applicability of the approach for a real situation.     

Modelling assessment of regional groundwater contamination due to historic smelter emissions of heavy metals

Historic emissions from ore smelters typically cause regional soil contamination. We developed a modelling approach to assess the impact of such contamination on groundwater and surface water load, coupling unsaturated zone leaching modelling with 3D groundwater transport modelling. Both historic and predictive modelling were performed, using a mass balance approach for three different catchments in the vicinity of three smelters. The catchments differ in their hydrology and geochemistry. The historic modelling results indicate that leaching to groundwater is spatially very heterogeneous due to variation in soil characteristics, in particular soil pH. In the saturated zone, cadmium is becoming strongly retarded due to strong sorption at neutral pH, even though the reactivity of the sandy sediments is low. A comparison between two datasets (from 1990 to 2002) on shallow groundwater and modelled concentrations provided a useful verification on the level of statistics of "homogeneous areas" (areas with comparable land use, soil type and geohydrological situation) instead of comparison at individual locations. While at individual locations observations and the model varies up to two orders of magnitude, for homogeneous areas, medians and ranges of measured concentrations and the model results are similar. A sensitivity analysis on metal input loads, groundwater composition and sediment geochemistry reveals that the best available information scenario based on the median value of input parameters for the model predicts the range in observed concentrations very well. However, the model results are sensitive to the sediment contents of the reactive components (organic matter, clay minerals and iron oxides). Uncertainty in metal input loads and groundwater chemistry are of lesser importance. Predictive modelling reveals a remarkable difference in geochemical and hydrological controls on subsurface metal transport at catchment-scale. Whether the surface water load will peak within a few decades or continue to increase until after 2050 depends on the dominant land use functions in the areas, their hydrology and geochemical build-up.     

Partitioning of polycyclic aromatic hydrocarbons to solid-sorbed nonionic surfactants

The partition of hydrophobic organic compounds (HOCs) into solid-sorbed surfactant has a crucial role in describing and predicting the distribution of HOCs in solid-water-surfactant systems. The experimental results of this study indicated that the partition coefficients of polycyclic aromatic hydrocarbons (PAHs) into the solid-sorbed surfactant (Ksm) increased with an increase in the sorption amount of surfactants onto solid and reached a stable maximum value (Km sm) at the sorption of surfactants in saturation state, at which the solid surface was completely covered with the surface micelle (or admicelle). The fitted Km sm values for PAHs with different surfactants were found to have a good linear relationship with the corresponding partition coefficient of PAHs to surfactant micelles in solution (Kmc), and then a model was developed to describe and predict the distribution of PAHs in solid-water-surfactant systems. These results are of practical interest for developing effective and safe surfactant-enhanced remediation technologies.