Dissolved organic matter removal using magnetic anion exchange resin treatment on biological effluent of textile dyeing wastewater

This study investigated the removal of dissolved organic matter（DOM） from real dyeing bio-treatment effluents（DBEs） with the use of a novel magnetic anion exchange resin（NDMP）.DOMs in two typical DBEs were fractionized using DAX-8/XAD-4 resin and ultrafiltration membranes. The hydrophilic fractions and the low molecular weight（MW）（〈3 kDa） DOM fractions constituted a major portion（〉50%） of DOMs for the two effluents. The hydrophilic and low MW fractions of both effluents were the greatest contributors of specific UV254absorbance（SUVA254）,and the SUVA254 of DOM fractions decreased with hydrophobicity and MW. Two DBEs exhibited acute and chronic biotoxicities. Both acute and chronic toxicities of DOM fractions increased linearly with the increase of SUVA254 value. Kinetics of dissolved organic carbon（DOC） removal via NDMP treatment was performed by comparing it with that of particle active carbon（PAC）. Results indicated that the removal of DOC from DBEs via NDMP was 60%,whereas DOC removals by PAC were lower than 15%. Acidic organics could be significantly removed with the use of NDMP. DOM with large MW in DBE could be removed significantly by using the same means. Removal efficiency of NDMP for DOM decreased with the decrease of MW. Compared with PAC,NDMP could significantly reduce the acute and chronic bio-toxicities of DBEs. NaCl/NaOH mixture regenerants,with selected concentrations of 10% NaCl（m/m）/1%NaOH（m/m）,could improve desorption efficiency.     

Effect of stocking density and food quality on the growth and fecundity of an epigeic earthworm (<Emphasis Type="Italic">Eisenia fetida</Emphasis>) during vermicomposting

Physico-chemical characteristics of the feed and optimum worm density are important parameters for the efficient working of a vermicomposting system. Overcrowding of worms can affect the efficiency of a vermicomposting system even if all other parameters have been optimized. This article reports the effect of stocking density and feed quality on the growth and fecundity of Eisenia fetida under laboratory conditions. The feed mixtures contained cow dung and textile mill wastewater sludge in different ratios. Three feed mixtures and five stocking rates (1, 2, 4, 8, and 12) were tested for 12 weeks. The results showed that E. fetida growth rate was faster at higher stocking densities; however, biomass gain per worm was faster at lower stocking densities. Sexual maturity was attained earlier at higher stocking densities. Growth rate was highest in 100% cow dung at all the stocking densities when compared to textile mill wastewater sludge containing feed mixtures. A worm population of 27–53 worms per kg of feed was found to be the most favorable stocking density.     

Effect of cycle time on biodegradation of azo dye in sequencing batch reactor

The effects of cycle time on the biodegradation of the azo dye remazol brilliant violet 5R (RBV-5R) were investigated in an anaerobic–aerobic sequencing batch reactor (SBR). System performance was determined by monitoring chemical oxygen demand (COD), color, anaerobic enzyme (azo reductase) and aerobic enzyme (catechol 2,3-dioxygenase), and aromatic amine concentration. SBR was operated in three different total cycle times (48 h, 24 h and 12 h), fed with a synthetic textile wastewater. In this study, the anaerobic period of SBR was found to allow the reductive decolorization of azo dye and the aerobic period was found to be effective on further COD removal after the anaerobic period. The percentage reductions in color by the anaerobic stage of the SBR were at 72%, 89% and 86% for the 24-h, 12-h and 6-h cycle times, respectively. Total COD removal efficiencies were over 75% for all operational conditions and about 70% of the COD removal was achieved in the first 3 h of anaerobic stages. During the decolorization of RBV-5R, two sulfonated aromatic amines (benzene-based and naphthalene-based) were formed and detected by HPLC. Aerobic phases of SBR with total cycle times of 48 h, 24 h and 12 h were able to remove benzene-based aromatic amines with removal efficiency of 64%, 92% and 89%, respectively. The results indicated that the best SBR performance in terms of color removal and aromatic amine degradation was achieved from total cycle time of 24 h.     

白腐真菌对染料脱色及降解过程机理和影响因素

许多白腐真菌对染料具有广谱的脱色和降解能力 ,其脱色及降解作用可能主要是由于其在次生代谢阶段产生的木质素过氧化酶LiPs和锰过氧化酶MnPs所致。培养条件对白腐真菌脱色及降解活性有较大的影响 ,在培养基中加入藜芦醇和二价锰等能够显著提高木质素过氧化酶的产生 ;富氮培养基会抑制LiPs的生成 ;硫脲、叠氮化物、氰化物等均能明显地抑制白腐真菌的脱色及降解活性 ;缓冲液的选择对维持稳定的 pH值和菌丝的形态有一定作用 ,从而影响其脱色效果 ;富氧环境是一切白腐真菌对染料进行脱色和降解的必要条件 ;适度的搅拌混合有利于反应时的物质之间传递 ;一般地 ,在培养时间达到 3天以后白腐真菌才能达到较高的脱色与降解活性。染料分子大小和结构及其基团的位置对脱色及降解效果有明显影响。使用特殊填料极大地提高处理系统中的生物量以克服真菌生长速度相对较慢、提高处理能力是该技术今后的研究重点。     

Polyoxometalates for photocatalytic degradation of aqueous dyestuff solutions and quantitative structure–property relationship study on photolysis rate constants

Polyoxometalate, K₆TiW₁₁O₃₉Sn·7H₂O (TiW₁₁Sn), was synthesized and characterized. TiW₁₁Sn and K₆ZrW₁₁O₃₉Sn·12H₂O (ZrW₁₁Sn) were evaluated for their photocatalytic degradation of triarylmethane (brilliant green and acid blue 9), bisazo (C.I. reactive black 5), and monoazo dyestuffs (C.I. reactive red 24, C.I. reactive red 194, and C.I. reactive orange 5) with natural sunlight in homogeneous aqueous solutions. TiW₁₁Sn and ZrW₁₁Sn effectively and photocatalytically decolorized the dyestuffs. The TiW₁₁Sn- and ZrW₁₁Sn-mediated photocatalytic degradation of the dyestuffs involved a pseudo-first-order reaction and was modeled by Langmuir–Hinshelwood-type kinetics. The observed pseudo-first-order rate constants (K^/) of triarylmethane dyestuffs were generally bigger than that of the azo dyestuffs. Quantitative structure–property relationship models of the K^/ of the dyestuffs were developed using partial least-square regression. The cumulative variance of the dependent variable explained by the partial least-square components was > 0.753 for each optimal model. This value indicated that the model had good predictive ability and robustness. The K^/ values of the dyestuffs were related to the energy of the lowest unoccupied molecular orbital, and the most positive net atomic charges on a sulfur atom of dyestuffs. The linear correlation coefficients between the predicted and experimental values were all > 0.9950.     

Ozonation of azo dye in a semi-batch reactor: a determination of the molecular and radical contributions

Azo dye ozonation was carried in a semi-batch reactor to evaluate both the molecular and radical contributions of ozone on the dye decay. From two mass balance equations, the simultaneous determination of mass transfer, self-decomposition and solubility parameters of ozone were determinated; thus establishing the steady state conditions in the experimental system. The results of kinetic studies showed that the decay of azo dye was a pseudo-first-order reaction with respect to dye concentration and the overall rate constant increased with an increase in the pH, however declined with an increase in the dye concentration. Furthermore, from the overall rate constants obtained at various pH values a mathematical analysis of dye decay was performed, which provides a practical new method to quantify the radical and molecular contributions in the ozonation of azo dyes.     

三维电极法对印染废水脱色的实验研究

对三维电极方法处理模拟印染废水的脱色进行了实验研究,初步探讨了三维电极处理印染废水的机理,对影响处理效果的各种因素,如曝气、填充物质种类、活性炭与铁屑重量比、槽电压、电极间距、初始废水pH值等进行了条件实验。实验结果表明：不曝气的脱色效果比曝气的脱色效果好;填充物为混合物活性炭与铁屑比活性炭、无填充物的脱色效果好;混合物活性炭和铁屑重量比为2：1时的脱色效果最佳;槽电压越高,脱色效果越好,但当大于某个值16v时,处理效果反而会下降;电极间距越小,脱色效果越好,但间距小于1．5cm时易短路而影响脱色效果;中性条件下的脱色率要优于酸性和碱性条件下的;综合考虑,在不曝气,活性炭和铁屑重量比为2：1,槽电压为16v,电极间距为6cm,溶液浓度为200mg／L,pH=6的条件下,降解时间为90win,脱色率可达98．7％。     

Emerging design strategies in sustainable production and consumption of textiles and clothing

This study contributes to current knowledge of sustainability in textile and clothing production and consumption. When the textile and clothing industry aims to promote sustainability, the main change factors have been linked to eco-materials and ethical issues in production. At present, however, business models are mainly linked with a large volume of sales and production. Although industrial development has moved toward smaller environmental impact, production as well as consumption has increased to levels where the benefits of technological development are reduced. A change is thus needed to reach a systemic transformation, not only in production but also in consumption. The aim of this paper is to open up the discussion on opportunities for radical change in this industry. The paper presents ways to rethink and redesign business in the textile and clothing field by offering an overview on several design strategies that exist today in niche markets. Furthermore we evaluate how interested consumers are in these design strategies and discuss the opportunities these design approaches offer to sustainable development through new value creation.