旱涝灾害的一些基本问题初探

首先就旱涝灾害对人类的作用进行了分析，认为它影响范围最大，危害程度最深．其次．对旱涝灾害的成因、确定旱涝灾害的定量指标以及评估旱涝灾害的指标体系进行分析探讨；最后对国内防御旱涝灾害的能力做了总体评价，并对其所采取的预防，救抗灾措施等进行分析．     

Production of hydrogen by steam gasification of dehydrochlorinated poly(vinyl chloride) or activated carbon in the presence of various alkali compounds

Steam gasification of dehydrochlorinated poly(vinyl chloride) (PVC) or activated carbon was carried out in the presence of various alkali compounds at 3.0 MPa and 560°C–660°C in a batch reactor or in a semi-batch reactor with a flow of nitrogen and steam. Hydrogen and sodium carbonate were the main products, and methane and carbon dioxide were the minor products. Yields of hydrogen were high in the presence of sodium hydroxide and potassium hydroxide. The acceleration effect of the alkali compounds on the gasification reaction was as follows: KOH > NaOH > Ca(OH)₂ > Na₂CO₃. The rate of gasification increased with increasing partial steam pressure and NaOH/C molar ratio. However, the rate became saturated at a molar ratio of NaOH/C greater than 2.0.     

SCR反应塔入口段烟气速度场的数值模拟

使用商业计算软件CFX5．7．1，采用标准k-ε湍流模型，模拟了SCR脱硝反应塔入口段烟气速度场，并分析比较了导流板对烟气速度场的影响及均匀SCR反应塔进口处烟气速度场的作用。     

海啸预警系统及我国海啸减灾任务

2004年12月26日印度洋海啸引发了新一轮海啸预警系统的研究。简述了地震海啸预警的原理，分析了海啸数值模拟的一些基本方法，综述了目前世界上多个国家海啸预警系统的建设情况，通过对我国海啸灾害研究现状的分析，明确了我国当前海啸防灾减灾工作的主要任务。     

城市绿地系统建设与城市减灾防灾

自然灾害往往给城市造成重大损失.在城市综合防灾减灾体系中,城市绿地系统占有十分重要的位置.城市绿地系统是城市规划和建设中的重要组成部分,它不仅具有美化城市环境、净化空气、平衡城市生态系统、为城市居民提供休憩游乐场所等作用,同时还具有防震、防火、防洪、减轻灾害的功能.从城市绿地的定义和分类人手,分析了城市绿地系统在城市综合防灾减灾中的作用,并通过介绍和分析日本防灾公园的规划建设,探讨了城市避灾绿地系统的规划方法.     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.     

Integrating fisheries into the national development plans of Small Island Developing States (SIDS): Ten years on from Barbados

The development and effective introduction of strategies designed to ensure the ecologically and economically sustainable utilization of coastal and marine resources is perhaps the major challenge for Small Island Developing States (SIDS). In response, the 1994 Barbados Programme of Action (BPoA) called upon the SIDS to implement appropriate coastal and marine strategies and, crucially, ensure that such strategies were integrated into sustainable national development plans (NDPs). This article examines the extent to which contemporary NDPs and donor support programmes have incorporated the fisheries sector — arguably the most important coastal/marine resource for many SIDS — into such documents. Applying an assessment methodology, originally developed to identify levels of environmental mainstreaming within World Bank country assistance strategies to NDPs and donor support programmes, we are able to identify those SIDS who have most effectively integrated the fisheries sector into such documents. Comparison with data indicating the importance of the sector to the national economy (in terms of generating foreign exchange, employment generation and/or supporting domestic protein consumption levels) enables us to pinpoint those countries with substantial fisheries sectors, but a correspondingly lower than expected degree of sectoral mainstreaming. We suggest that the January 2005 review of the BPoA offers an opportune moment for such countries to redress these omissions.     

Pyrolysis and catalytic pyrolysis as a recycling method of waste CDs originating from polycarbonate and HIPS

Pyrolysis appears to be a promising recycling process since it could convert the disposed polymers to hydrocarbon based fuels or various useful chemicals. In the current study, two model polymers found in WEEEs, namely polycarbonate (PC) and high impact polystyrene (HIPS) and their counterparts found in waste commercial Compact Discs (CDs) were pyrolysed in a bench scale reactor. Both, thermal pyrolysis and pyrolysis in the presence of two catalytic materials (basic MgO and acidic ZSM-5 zeolite) was performed for all four types of polymers. Results have shown significant recovery of the monomers and valuable chemicals (phenols in the case of PC and aromatic hydrocarbons in the case of HIPS), while catalysts seem to decrease the selectivity towards the monomers and enhance the selectivity towards other desirable compounds.     

Characterisation of polycyclic aromatic hydrocarbons in flue gas and residues of a full scale fluidized bed combustor combusting non-hazardous industrial waste

This paper studies the fate of PAHs in full scale incinerators by analysing the concentration of the 16 EPA-PAHs in both the input waste and all the outputs of a full scale Fluidized Bed Combustor (FBC). Of the analysed waste inputs i.e. Waste Water Treatment (WWT) sludge, Refuse Derived Fuel (RDF) and Automotive Shredder Residue (ASR), RDF and ASR were the main PAH sources, with phenanthrene, fluoranthene and pyrene being the most important PAHs. In the flue gas sampled at the stack, naphthalene was the only predominant PAH, indicating that the PAHs in FBC’s combustion gas were newly formed and did not remain from the input waste. Of the other outputs, the boiler and fly ash contained no detectable levels of PAHs, whereas the flue gas cleaning residue contained only low concentrations of naphthalene, probably adsorbed from the flue gas. The PAH fingerprint of the bottom ash corresponded rather well to the PAH fingerprint of the RDF and ASR, indicating that the PAHs in this output, in contrast to the other outputs, were mainly remainders from the PAHs in the waste inputs. A PAH mass balance showed that the total PAH input/output ratio of the FBC ranged from about 100 to about 2600 depending on the waste input composition and the obtained combustion conditions. In all cases, the FBC was clearly a net PAH sink.     

Combined Municipal Solid Waste and biomass system optimization for district energy applications

Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained.