NOAA卫星监测巢湖蓝藻水华的试验分析

采用实地水质采样分析、水面光谱测量等实地监测 ,并结合NOAA气象卫星遥感信息 ,对巢湖水华进行星地同步调查监测。结果表明 ,蓝藻叶绿素的存在使得进入近红外波段水体反射率明显上升 ,基于这一光谱特性以及蓝藻特有的漂浮特性 ,可利用NOAA卫星监测巢湖等内陆大面积的严重污染湖泊蓝藻水华的分布状况。     

滇池蓝藻成份分析及利用途径探讨

滇池蓝藻的粗蛋白为４３．６９％，藻蓝蛋白为８－１５％，藻多糖为５￣８％。初步估算，滇池每年可收获的蓝藻的生物量约１００００吨鲜重，其中可用于资源化的量约为５０００吨（干重）左右。一吨蓝藻干粉可以生产藻蓝蛋白５０－８０ｋｇ，藻多糖２０ｋｇ，藻毒素１ｋｇ；同时还可与其他原料混合制成饲料或肥料在农业上应用。     

固定化无花果曲霉对活性艳蓝KN-R的脱色

采用海藻酸钙法固定不同状态无花果曲霉，形成活菌固定化小球和死菌固定化小球。同时考察了不同因素如培养时间、温度、pH、染料浓度对活性艳蓝KN-R的脱色影响。试验结果表明：在33℃、pH为5．0、150r／min的振荡条件下，经66h它对活性艳蓝KN-R的脱色达到最佳效果。两种不同状态固定化小球的脱色率有较大的差别，其中活菌固定化小球的脱色率明显高于死菌固定化小球。其中活菌固定化小球经3次脱色后能重复使用，脱色率仍达79．8％。     

电气石在环境领域的最新应用研究：处理雅格素蓝BF-BR染料废水

在氧化剂(H2O2)的协同作用下,电气石对雅格素蓝BF-BR染料废水具有良好的脱色能力,脱色率与电气石用量、氧化剂用量、水浴温度、作用时间呈正相关性,溶液pH值为2和12时,脱色率最大.正交实验优化了工艺条件:氧化剂用量1.5 mL、作用时间9 min、电气石用量1g、水浴温度363 K、pH=2,此时脱色率可达到100%.动力学研究表明:雅格素蓝BF-BR染料废水的脱色反应为一级反应,其反应表观动力学方程为:-lnCR=0.36733t-lnC0(R=0.9827),反应速率常数为k=0.36733 min-1,反应半衰期为t1/2=1.887 min.机理的初步分析表明:脱色过程是矿物催化-类芬顿反应.     

降解酸性蓝B的镰刀菌(Fusarium sp.)HJ01的分离和降解特性研究

从膨润土中分离出一株对酸性蓝B具有降解效果的镰刀菌(Fusariumsp.)HJ01,研究了其生长特征和动力学模型模拟、降解酶的性质以及对酸性蓝B的脱色效果.结果表明:菌株生长的适宜条件为:pH范围为6~7,蔗糖为碳源,NH4Cl为氮源.菌体生长符合改进的logistic law模型.SDS-PAGE分析HJ01菌株所产漆酶的相对分子量约为66×103,在低氮条件下漆酶活性高达431~812U·mg~(-1)·s~(-1).菌体培养96h后加入到含100mg·L~(-1)酸性蓝B的培养基中,再培养96h,酸性蓝B的脱色率达100%.紫外光谱分析表明,酸性蓝B的发色基团蒽醌环被漆酶破坏.     

基于MODIS_C061的长三角地区AOD与Angström指数时空变化分析

以长三角为研究区,利用AERONET地基观测的气溶胶光学厚度(AOD)数据,验证了基于MODIS_C061深蓝算法(DB)的AOD产品适用于长三角地区.并利用2000～2018年MOD04_L2产品,分析研究区AOD和Angstr?m指数(AE)的时空变化特征.结果表明,长三角地区AOD呈现东部和北部平原地区高、南部和西部山区低的空间分布,AE呈现南部地区高北部地区低的空间分布. 2003～2007年,AOD年均值增长显著,增长率为23%, 2011年以后逐渐下降; 2001～2003年,AE年均值增长迅速, 2012年以后逐渐下降.AOD在长三角地区呈现夏季最高、冬季最低的显著季节性变化,月均值6月最高达0.84, 8月最低为0.40;AE呈现秋季最高,春季最低的季节性变化,月均值9月最高达1.47, 3月最低为1.08.根据AOD与AE的关系,对长三角地区气溶胶类型进行了研究,结果表明人为产生的城市工业气溶胶是该地区主要的气溶胶类型,其次为混合型和清洁大陆型.     

壳聚糖的改性及其去除废水中染料物质的性能研究

采用戊二醛交联FeCl_3制备改性壳聚糖吸附处理染料废水,以20 mg·L~(-1)的亚甲基蓝溶液作为处理对象,探究氯化铁改性壳聚糖(FeCl_3-CTS)投加量、废水p H值、反应时间对其处理亚甲基蓝废水性能的影响,并对吸附动力学、吸附等温线过程进行拟合.结果表明,FeCl_3-CTS对亚甲基蓝废水的处理效果远高于未改性壳聚糖(N-CTS),尤其是在投加量为0.1 g·L~(-1)、p H=6的条件下,经FeCl_3-CTS处理50 min后,亚甲基蓝废水的脱色率高达99.4%,FeCl_3-CTS对亚甲基蓝的吸附容量高达198.8 mg·g~(-1),与N-CTS的54.8%和109.6 mg·g~(-1)相比,均有显著的提高.吸附动力学、吸附等温线拟合结果显示,FeCl_3-CTS对亚甲基蓝废水的吸附过程符合准二级反应动力学方程(R2=0.9992)和Langmuir等温线方程(R~2=0.9995).     

磁性Fen+@GO非均相Fenton催化氧化亚甲基蓝

采用化学共沉淀法制备了磁性Feⁿ⁺@GO（MFGO）纳米复合材料,并将其用于非均相Fenton催化氧化亚甲基蓝（MB）.扫描电镜、透射电镜和光电子能谱分析表明,催化活性粒子（Feⁿ⁺/铁氧化物）成功负载在GO表面.实验研究了pH值、H₂O₂初始浓度、催化剂投加量等因素对MB降解效果的影响.结果表明,H₂O₂、MFGO和H₂O₂+MFGO体系在反应120min后,MB降解率分别达到7.83%、25.58%和99.19%;在优化条件为H₂O₂浓度0.79mol/L、MFGO用量0.75g/L、pH值8时,MB降解率可达99.90%;在pH值为3~11范围内,MB降解率均在99%以上;MFGO经过6次重复使用后对MB的降解率仍可达到95.08%,是一种pH值响应宽、可磁分离回收的新型非均相催化剂.     

Comparison of activated carbon and iron/cerium modified activated carbon to remove methylene blue from wastewater

The methylene blue(MB)removal abilities of raw activated carbon and iron/cerium modified raw activated carbon(Fe–Ce-AC)by adsorption were researched and compared.The characteristics of Fe–Ce-AC were examined by N_2adsorption,zeta potential measurement,FTIR,Raman,XRD,XPS,SEM and EDS.After modification,the following phenomena occurred:The BET surface area,average pore diameter and total pore volume decreased;the degree of graphitization also decreased.Moreover,the presence of Fe_3O_4led to Fe–Ce-AC having magnetic properties,which makes it easy to separate from dye wastewater in an external magnetic field and subsequently recycle.In addition,the equilibrium isotherms and kinetics of MB adsorption on raw activated carbon and Fe–Ce-AC were systematically examined.The equilibrium adsorption data indicated that the adsorption behavior followed the Langmuir isotherm,and the pseudo-second-order model matched the kinetic data well.Compared with raw activated carbon,the maximum monolayer adsorption capacity of Fe–Ce-AC increased by27.31%.According to the experimental results,Fe–Ce-AC can be used as an effective adsorbent for the removal of MB from dye wastewater.     

Influence of sodium dodecyl sulfate coating on adsorption of methylene blue by biochar from aqueous solution

Biochar is regarded as a promising new class of materials due to its multifunctional character and the possibility of effectively coupling different properties. With increasing introduction into the environment, environmental chemicals such as surfactants will load onto the released biochar and change its physicochemical characteristics and adsorption behavior toward pollutants. In this study, sodium dodecyl sulfate(SDS), as one type of anionic surfactant, was coated onto biochar with different loading amounts. The influence of SDS loading onto biochar's physicochemical properties were investigated by Fourier transform infrared(FT-IR) spectroscopy, elemental analysis, zeta potential and Brunauer–Emmett–Teller(BET) surface area and pore size distribution analysis. Results showed that the pore size of the biochar decreased gradually with the increase of SDS loading because of the surface-adsorption and pore-blocking processes; the p H of the point of zero charge(pHPZC) decreased with increasing SDS loading. Although surface-coating with SDS decreased the pore size of the biochar, its adsorption capacity toward Methylene Blue(MB) significantly increased. The biochar-bound SDS introduced functional groups and negative charges to the biochar surface, which could thus enhance the adsorption of MB via hydrogen bonding and electrostatic interaction. The results can shed light on the underlying mechanism of the influence of anionic surfactants on the adsorption of MB by biochar.