生活垃圾焚烧厂渗滤液生化出水的混凝机理研究

分别采用Al₂(SO₄)₃、FeCl₃、PAC、PAFC对垃圾焚烧厂渗滤液生化出水进行混凝研究,并建立混凝处理模型.结果表明,在pH值为6时,单独投加500 mg/L的Al₂(SO₄)₃、FeCl₃、PAC、PAFC时,COD去除率分别为20％、17％、30％、40％.焚烧厂渗滤液生化出水中有机物主要是由相对分子质量小于2 000的可溶性物质组成;通过透射电镜扫描技术(TEM)和Zeta电位分析,发现中和及网捕桥联是渗滤液混凝处理的主要作用机理;相比无机盐混凝剂,聚合物混凝剂具有较强的电中和以及网捕架桥功能.     

Comparing results of cultured and uncultured biological methods used in biological phosphorus removal

Increasing attention has been paid to phosphate-accumulating organisms(PAOs)for their important role in biological phosphorus removal.In this study,microbial communities of PAOs cultivated under different carbon sources(sewage,glucose,and sodium acetate) were investigated and compared through culture-dependent and culture-independent methods,respectively.The results obtained using denaturing gradient gel electrophoresis(DGGE)of polymerase chain reaction-amplified 16S rDNA fragments revealed that the diversity of bacteria in a sewage-fed reactor(1#)was much higher than in a glucose-fed one(2#)and a sodium acetate-fed one(3#);there were common PAOs in three reactors fed by different carbon sources.Five strains were separated from three systems by using a phosphate- rich medium;they were from common bacteria isolated and three isolates could not be found in DGGE profile at all.Two isolates had good phosphorus removal ability.When the microbial diversity was studied,the molecular biological method was better than the culture-dependent one.When phosphorus removal characteristics were investigated,culture-dependent approach was more effective. Thus a combination of two methods is necessary to have a comprehensive view of PAOs.     

Kinetics of the sensitized photodegradation of nonylphenol

Nonylphenol (nonyl‐P) belongs to the classification of persistent organic pollutants. In this work we demonstrate that the contaminant suffers photooxygenation when exposed to visible light Eosin‐photosensitized irradiation. The mechanism was identified as a singlet molecular oxygen‐mediated photooxidation. Rate constants for the process, determined by time‐resolved phosphorescence detection of singlet molecular oxygen, are in the range 10⁵‐10⁷ M^‐1 s^‐1, depending on the characteristics of the reaction medium. The photooxidative process is more efficient when performed in highly polar alkaline medium.

The aggregation of nonyl‐P molecules in pure water decreases the rates of sensitized photooxidation of nonyl‐P and also those of polychlorophenolic contaminants, employed as photooxidizable model compounds, when photolyzed in the presence of nonylphenol. These results are discussed in terms of a micellar effect.     

混凝-气浮控制三卤甲烷生成势的研究

研究了混凝一气浮工艺对不同分子量区间三卤甲烷生成势（trihalomethanes formation potential，THMFP）的去除效果及絮体形态对THMFP去除效果的影响。结果表明，混凝一气浮工艺以去除大分子量区间THMFP为主，对小分子量区间THMFP的去除效果较差。UV254值与THMFP值的线性相关系数为0．9449，UV254值可以较好地反映THMFP的含量。絮体的分形维数为1．17～1．2时，孔隙率较大，可增加絮体对THMFP的活性吸附空间，且絮体相对密度较小，可增强同向絮凝作用，增加絮体和THMFP的接触概率，有利于气浮对THMFP的去除。     

分子生态技术对厌氧脱氮除磷微生物优势菌群的鉴定

应用分子生态克隆技术,直接对A/O反应器所驯化培养的厌氧脱氮除磷微生物样品进行主要功能菌群的分子生态学鉴定。通过克隆文库的序列分析,发现驯化培养后厌氧污泥样品中的优势菌群主要是Azospirillum和Selenomonas两个属。这一结果表明,厌氧反应器中的某些红螺菌科和氨基酸球菌科的微生物,可能是在厌氧条件下对氮磷同时降解起关键作用的功能菌群。     

Annual production and molecular weight as an influential factor for environmental distribution of chemicals — a case study in Japan

The changes promoted by treatment of a highly polluted soil with sulphuric acid or calcium hydroxide for changing its pH value are studied by controlling physical properties (particle size, TGA and DTA curves), evolution of metal species (exchangeable, as carbonates, related to Fe‐Mn oxides, linked to organic matter and residual) and metal uptake by plant cultures. Metal contents were determined, after wet digestion with HF—HNO₃—HC1O₄ when necessary, by AAS (Ca, Mg, Cu, Pb, Mn, Fe, Zn) or emission (Na, K). The treatment of soil with successive amounts of sulphuric leads to changes in particle size, hydration properties and exothermic peak for organic matter combustion. Very small changes were, however, detected in the alkaline treatment of soil. Soil treatments do not have practical influence on speciation of some metals (Na, K, Mg, Pb, Mn, Fe), but the intensity of the acid treatment leads to both an increase in the Cu extraction and a decrease in the Ca solubilization, probably through gypsum formation. In the case of zinc a maximum solubility in the middle of the range of acid treatment was observed. The comparison among extractants shows solubilities high for two pollutants (Pb, Cu), associated mainly to Fe—Mn oxides and organic matter, and low for two macrocomponents (Fe, K). The rest of metals, basically present in soil as carbonates or oxides, have intermediate extractions. Pot cultures weights depended mainly on both the treatment of soil (poor development in the more acid sample and drainage difficulties in the rest of acid treatments) and the situation (very low weights in laboratory runs as compared with outside), but the irrigation with water or a diluted sulphuric acid solution (at pH = 4.0) did not produce significant weight changes. Tendencies to increase plant pollution were observed for smaller soil pH, acid irrigation and probably for outside cultures, due to uptake by leaves.     

厌氧颗粒污泥胞外聚合物的影响因素研究

为明确厌氧颗粒污泥胞外聚合物产生的影响机制，通过改变pH、污泥负荷（Ns)和C/N比，研究厌氧颗粒污泥及其上清液的EPS（胞外聚合物）产生量及组分多糖、蛋白质的变化情况，采用红外光谱对比分析了pH、Ns、C/N比对EPS分子结构的影响；结果表明，过酸、过碱和不适当的C/N比不利于厌氧颗粒污泥形态保持和微生物生长，但Ns对厌氧颗粒污泥形态的影响不大。红外光谱分析表明，蛋白质肽键在强酸、强碱条件下均发生了变化，羧基、醇和酚则在强酸条件下(pH 3)消失,C/N比和污泥负荷对EPS的分子结构影响不大。     

印染废水生化出水中各类有机物在小型活性炭床吸附过程中的去除效果

采用连续流活性炭炭床处理印染废水生化出水,通过XAD-8/XAD-4吸附树脂将印染废水生化出水中的溶解性有机物分为4类:疏水酸、非酸疏水物质、弱疏水物质和亲水物质,采用超滤膜法测定水样的分子量分布,对印染废水生化出水中不同种类以及不同分子量大小的有机物在煤质炭、椰壳炭2种活性炭动态实验处理过程中的去除特性进行研究。实验结果表明,2种活性炭对该水样中的有机物均有明显的去除效果,其中以煤质炭的处理效果较优。煤质炭吸附疏水性和亲水性有机物均有明显的处理效果,对非酸疏水物质和弱疏水有机物的吸附效果较差。煤质炭对分子量<10 k的小分子有机物的吸附效果对实验结果的贡献较大。     

吸附联合低温等离子体法去除甲苯废气

对介质阻挡放电条件下产生的低温等离子体联合吸附去除低浓度甲苯废气进行了实验研究。考察了反应器内分别填充分子筛、陶瓷环和混合填料时,甲苯的吸附效果;比较了各种填充条件下,低温等离子体对甲苯的去除效果和副产物臭氧的产生量;并对填充混合填料时不同外加电压、不同操作条件下,吸附联合低温等离子体去除甲苯的过程进行系统的研究。结果表明,外加电压相同,混合填料对甲苯的去除率最高,大于97%,依次是分子筛、陶瓷环、无填充;同时混合填料的臭氧浓度小于其他填料;当电压为18 kV时,混合填料可获得较高的甲苯去除率,同时产生的臭氧副产物最少。     

苯酚分子印迹聚合物的合成、表征及吸附性能研究

以苯酚为模板,2-Vpy为功能单体,EGDMA为交联剂,采用本体聚合方式在氯仿溶剂中合成了一系列分子印迹聚合物,并通过静态吸附实验对聚合物的选择吸附性进行评价.结果显示,以氯仿作为致孔剂,模板分子与功能单体的摩尔比为1∶2时,聚合物对模板分子的印迹因子为3.96,最大表现结合量(Qmax)为120.7 mmol/g,具...