碱改性脱水污泥对水中镉的吸附效能研究

城市市政污水处理厂产生的剩余污泥是一种良好的重金属生物吸附剂制备原料。以北京某市政污水处理厂产生的脱水剩余污泥为原料,采用碱改性处理方法,制备得到碱改性脱水污泥生物吸附剂,通过其对水中镉的等温吸附实验,考察其重金属吸附效能。研究结果表明:碱改性脱水污泥对水中镉的等温吸附曲线符合Langmuir等温吸附模型。碱改性处理后,脱水污泥对水中镉的最大饱和吸附容量提高了2.8倍,达0.966 mmol/g,显著高于同类型脱水污泥生物吸附剂。碱改性脱水污泥对水中镉的最大饱和吸附容量与改性过程中所使用的Na OH浓度之间的线性相关性较差,呈现一定的波动变化趋势。     

Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Nitrogen mass balance in a constructed wetland treating piggery wastewater effluent

The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.     

低碳氮比条件下膜生物反应器处理高氨氮废水时稳定亚硝化过程的建立

以人工配制高氨氮低碳氮比(C/N)废水为进水,采用膜生物工艺,通过控制亚硝化池内温度为28~30℃,溶解氧浓度为0.5 mg/L,水力停留时间为12 h,pH为7.8~8.0,进水氨氮浓度为200 mg/L、CODCr为40 mg/L,在亚硝化池中成功实现了C/N为1∶5条件下废水的亚硝化。经过14 d的运行时间,污泥龄控制在100 d,在膜生物反应器(MBR反应器)中得到了稳定的亚硝酸盐氮积累。将氨氮浓度分别提高至400和800 mg/L的情况下,其亚硝化菌的耐受浓度负荷冲击能力均较强。     

PX之争

<正>有谁对一件衣服感到恐惧?有谁对银行卡感到反感?有谁对周围的饮料瓶陌生?……这些一直以来都出现在我们的生活中,熟悉,并被广泛使用,甚至不可或缺的东西,我们都认识并接受,甚至喜欢。但当把一切追溯至源头,发现他们都来自于同一种基础化工原料——对二甲苯时,这个英文缩写被称为"PX"的东西却让一些人感到害怕,所谓"不明觉厉"。原本的气味"芳香"而今却充满了"火药味"。关于它的论战从"低毒"到"剧毒",从"我家后院"到"100公里以上";阵地从"市委门前"到"百度百科",从"线上"到"线下";     

铁碳微电解法预处理聚氯乙烯(PVC)离心母液废水

采用铁碳微电解法对聚氯乙烯(PVC)离心母液废水进行预处理。分别考察反应时间、铁粉投加量、Fe/C(质量比)、pH值及曝气速率对母液废水中的COD和聚乙烯醇(PVA)去除率的影响,并在此基础上通过正交实验确定了废水COD的最佳处理条件。结果表明,最佳处理条件为:反应时间为4 h、铁粉投加量为30 g/L、Fe/C为1:2、pH值为2、曝气速率为0.8 L/min。在该条件下,废水中COD、PVA和TOC的平均去除率分别为(67%±2)%、(98%±1)%和(55%±3)%,废水的BOD/COD值从0.3提高到0.5,可生化性得到了显著提高。同时,废水中的NH3-N、浊度也在很大程度上得到了去除,出水中总铁含量也很低。     

萃取结晶法回收高盐废水中的石油磺酸盐

采用萃取结晶法回收石油磺酸盐工业生产中高盐废水中的石油磺酸盐,根据溶解度筛选萃取剂,研究各萃取剂的回收效果。采用平衡法测定各溶剂对石油磺酸盐和硫酸铵的溶解度,优选乙醇、异丙醇和正丁醇为萃取剂回收石油磺酸盐并脱除硫酸铵。室温下,一定溶剂比的正丁醇对硫酸铵的结晶率远小于乙醇和异丙醇,而正丁醇回收的石油磺酸盐的纯度远大于乙醇和异丙醇,高达98%;各萃取剂对石油磺酸盐的回收率顺序:乙醇>异丙醇>正丁醇。因此,根据产品需求选择合适的萃取剂及溶剂比处理废水,从而达到脱盐和回收石油磺酸盐的双重目的。     

新型IC反应器在山梨醇废水处理中的工程应用

将布水装置优化后的新型内循环(IC)反应器应用于某山梨醇生产企业实际废水的二级厌氧生化处理,获得了较好的处理效果。调试阶段的结果表明:经过IC反应器的处理后,废水COD浓度由处理前的2 374~4 967 mg/L降至301~823 mg/L,COD去除率达81.4%~91.2%,COD容积负荷达8.1~13.7 kg/(m3·d);总体来说,当水力负荷增大时,COD容积负荷也相应增大;IC反应器的出水挥发性脂肪酸(VFA)基本控制在200 mg/L以下;厌氧出水再依次经过接触氧化池和絮凝沉淀池等配套工艺的处理后,COD降至80 mg/L以下,实现达标排放。