不同波长紫外光催化降解活性艳蓝KN-R动力学研究

以蒽醌类染料活性艳蓝KN-R(以下简称KN-R)为对象,以TiO2为光催化剂,实验了不同波段紫外光条件下KN-R的降解过程。结果表明:365 nm和254 nm两种波段对于KN-R的光催化降解过程均符合假一级动力学方程,但是通过对比各初始浓度下活性艳红KN-R的反应速率常数(Kapp)可以发现,在相同紫外灯功率下,短波辐射下的Kapp平均为长波辐射下Kapp的3倍,说明短波紫外更有利于活性艳蓝KN-R的降解。     

吸附树脂负载铁酞菁催化降解硝基苯的研究

在可见光照射下,采用吸附树脂负载铁酞菁催化过氧化氢降解硝基苯.考察了光照、催化剂投加量、双氧水投加量、温度及pH值等因素对催化效果的影响.结果表明,在功率为50W卤钨灯照射下,硝基苯溶液初始质量浓度为200 mg/L,初始pH值为3,催化剂投加量为1.5 g/L,双氧水投加量为1.0 mL/L,温度为35℃下反应10h,硝基苯去除率可达到79.9％.     

Reaction mechanism and metal ion transformation in photocatalytic ozonation of phenol and oxalic acid with Ag+/TiO2

Photocatalytic ozonation of phenol and oxalic acid （OA） was conducted with a Ag^＋/TiO2 catalyst and different pathways were found for the degradation of different compounds. Ag^＋ greatly promoted the photocatalytic degradation of contaminants due to its role as an electron scavenger. It also accelerated the removal rate of OA in ozonation and the simultaneous process for its complex reaction with oxalate. Phenol could be degraded both in direct ozonation and photolysis, but the TOC removal rates were much higher in the simultaneous processes due to the oxidation of hydroxyl radicals resulting from synergetic effects. The sequence of photo-illumination and ozone exposure in the combined process showed quite different effects in phenol degradation and TOC removal. The synergetic effects in different combined processes were found to be highly related to the properties of the target pollutants. The color change of the solution and TEM result confirmed that Ag＋ was easily reduced and deposited on the surface of Tit2 under photo-illumination, and dissolved again into solution in the presence of ozone. This simple cycle of enrichment and distribution of Ag^＋ can greatly benefit the design of advanced oxidation processes, in which the sequences of ozone and photo-illumination can be varied according to the needs for catalyst recycling and the different properties of pollutants.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

四环素光催化降解特性与选择性研究

研究了盐酸四环素的光催化降解行为,结果表明四环素光催化降解反应符合一级反应动力学方程,吸附过程为整个光催化降解的控制步骤,推断四环素的主要降解途径是吸附在二氧化钛(TiO2)表面发生光催化氧化反应.同时,通过对四环素与磺胺甲唑或阿莫西林混合样品的降解实验表明,改变pH、TiO2投加量等因素,两种抗生素的降解表现出了明显的选择性.     

TiO2/粉煤灰光催化降解双氯芬酸钠研究

以燃煤电厂外排的废弃物粉煤灰(CFA)为载体,采用混合泥浆法将TiO2负载在CFA的表面,得到一种新型的复合光催化剂TiO2/CFA.对TiO2/CFA进行了扫描电镜分析、X射线衍射分析和氮吸附测试,并以双氯芬酸钠的光催化降解为评价手段,研究了TiO2负载量对TiO2/CFA光催化性能及重复使用性能的影响.结果表明,TiO2负载量的增加有助于提高TiO2/CFA的光催化性能,但当TiO2负载量过高时,CFA上的TiO2在水处理过程中容易脱落,对TiO2/CFA光催化剂的重复使用性能不利.本研究中,最佳的TiO2负载量约为50%,循环使用6次,其光催化降解效率没有明显降低,双氯芬酸钠的降解率均可达70%以上.     

复合催化膜生物反应器处理一氧化氮废气研究

采用溶胶-凝胶法以聚砜(PSF)中空纤维膜为载体制备了Fe-Ti O_2/PSF复合催化膜,以此构建新型复合催化膜生物反应器(HCMBR),实现膜催化与硝化反硝化耦合烟气脱硝,进一步提高NO去除能力.采用Fe-Ti O_2/PSF复合催化膜生物反应器(HCMBR)处理一氧化氮废气,实现了180 d长时间高效稳定运行,NO去除效率可达93.2%,去除能力可达167.1g·(m~3·h)~(-1).适宜运行条件为:气体停留时间9 s、自然光光照强度670 lx,p H为6.8~7.2,n C/n N=3.7.Fe-Ti O_2/PSF复合催化膜加入,复合催化膜生物反应器去除NO的效率比膜生物反应器提高了1.4%~13%,在Fe-Ti O_2/PSF复合催化膜附着稳定的生物膜后,复合催化膜生物反应器去除NO的效率比湿式膜催化反应器提高了59.5%~66%.     

ZnO-PMMA复合材料光催化去除水中低浓度氨氮

通过水热法制备纳米ZnO,采用热粘固法成功地将其负载于聚甲基丙烯酸甲酯(PMMA)微球表面,并对ZnO-PMMA复合材料光催化去除水中低浓度氨氮的能力进行了考察.同时,探究了负载比例、初始氨氮浓度、催化剂浓度和pH对低浓度氨氮去除效率的影响.实验结果显示,PMMA改善了纳米ZnO的分散性和光催化能力,ZnO-PMMA能够有效地催化去除氨氮废水.在汞灯照射下,当pH=12、温度为30℃时,1 g·L~(-1)的催化剂(ZnO-PMMA)对50 mg·L~(-1)的氨氮废水去除率达到66%,且反应产物硝氮和亚硝氮含量较低,体现了该催化剂具有将氨氮转化为N2的良好的光催化降解能力.同时,纳米材料可以简单方便地回收,减轻了对环境的潜在影响,符合绿色化学的原则.     

BiOBr/Bi2MoO6异质结的构筑及对甲基橙的吸附/光催化性能的协同作用机制

采用简单的沉积-沉淀法合成了BiOBr/Bi_2MoO_6(BOB/BMO)异质结,采用XRD、XPS、TEM、SEM、EDS、FT-IR、UV-Vis-DRS、PL、PC和EIS等测试技术对光催化剂的物相组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物甲基橙(MO)的吸附和光催化降解作为探针来评价BiOBr/Bi_2MoO_6异质结的吸附性能与光催化活性增强机制.SEM和TEM分析结果表明,所得Bi_2MoO_6微球由大量厚度约为20~50 nm的纳米片组成;沉淀-沉积法所得样品的形貌分析显示,尺寸约为10 nm的BiOBr量子点均匀沉积在Bi_2MoO_6微球表面,形成的新颖的BOB/BMO异质结.N2吸附/脱附结果表明,Bi_2MoO_6和BiOBr形成异质结具有大的比表面积(64.94 m2·g-1),且表面孔结构丰富.吸附/光催化降解实验结果表明,与纯Bi_2MoO_6或者BiOBr相比,BOB/BMO异质结表现出更好的吸附性能和光催化活性.吸附/光催化协同作用机理分析表明,BOB/BMO异质结具有大的比表面积和丰富的孔结构是其吸附性能增强的主要原因.此外,光致发光(PL)谱、光电流(PC)和交流阻抗(EIS)分析进一步揭示了BOB/BMO异质结有利于光生载流子的分离与转移,导致光催化活性增强,二者的协同作用使其对MO具有优越的去除性能.此外,BOB/BMO异质结较稳定,重复使用性能良好,有望用于MO废水的实际处理.     

BiOCl/ZnMgAl-HTLCs复合材料光催化去除水中的甲基橙

以Mg(NO3)2·6H2O、Al(NO3)3·9H2O、Zn(NO3)2·6H2O、Bi(NO3)3·5H2O为主要原料,采用水热合成法,制备了Bi OCl/Zn Mg Al-HTLCs光催化剂,对其进行XRD、EDS、SEM、FT-IR、UV-Vis、TGA表征,并通过降解甲基橙(MO)实验,探究催化剂水热合成的p H、溶剂、温度对其光催化性能的影响.结果表明:Zn Mg Al-HTLCs改善了Bi OCl的分散性,Bi OCl/Zn Mg Al-HTLCs能够有效地催化去除水中的甲基橙,在p H=7.5、溶剂为水、T=140℃条件下,可见光催化活性最佳,光照60 min后对10 mg·L-1的甲基橙溶液(MO)的降解率均达到85%以上.综合表明,Bi OCl/Zn Mg Al-HTLCs是一种具有潜在应用前景的光催化剂.