火车装油过程初期火灾扑救方法探讨

以敞口、小鹤管、人工装汽油为例,通过试验分析认为:通常采用的干粉灭火法从理论和生产实际来看都存在问题,细水雾法是适合火车装油过程初期火灾扑救的较好方法,具有安全高效的特点。     

核电设备射频辐射抗扰度试验方法研究

参考美国核管制委员会(NRC)的行业规范RG 1.180,对比研究该规范中涵盖的两大标准体系,并以射频辐射抗扰度试验作为切入点,深入探讨了MIL-STD与IEC标准在干扰信号特性、试验布局、测试方法以及结果评价等关键技术上的差异。举例说明了具体测试中的技术细节以及试验结果的评估和使用方法。最终,形成试验实施的指导建议,为核电设备电磁兼容试验提供技术支持,并最终实现核电站的安全目标。     

红外系统对点源目标作用距离的优化计算

作用距离是红外系统核心性能指标之一,受大气、背景等多方面因素的影响。针对传统作用距离计算方法存在的局限,综合考虑多个影响因素,提出了一种优化计算方法,首次精确计算了作用距离与实际距离之差的大气衰减值,并对计算方法进行了验证。结果表明,优化计算方法具有较好的计算精度,可用于红外系统性能预测和整体设计。     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.     

ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

冷轧浓油废水预处理设施的设计与运行

就宝钢不锈钢有限公司配套建设的冷轧浓油废水处理工程的浓油废水预处理设施的设计与运行进行了介绍和分析,可作为相似工程中的借鉴和参考。     

油指纹快速分析辅助鉴别及油品信息可视化管理系统

针对海上溢油事故排查鉴别的需求,开发了一套油指纹数据管理和鉴别软件系统,系统包括综合信息数据库和数据分析鉴别两大组成部分。开发的数据库用来存储基础地理信息、油样空间信息、油样基本信息、油样二维谱图数据、油样特征指纹数据等。指纹分析鉴别模块实现了油样谱图的准确积分、特征指纹指标计算、油样比对鉴别、油样分类鉴别、油样检索排查等功能。系统开发完成后,在黄渤海多次溢油事故中得到了很好的应用,具有高效性和可靠性,极大提高了溢油事故排查工作的效率,为海上溢油事故执法调查提供了重要的技术支撑。     

模拟医疗废物在TG-DTA-FTIR上的热失重特性研究

在热重-差热分析仪上对模拟医疗废物分别在氮气和空气气氛中不同升温速率下加热的热失重行为进行了研究,并对升温速率和不同气氛对其热失重行为的影响进行了探讨.结果表明,随升温速率的提高,模拟医疗废物在2种气氛下热失重时挥发分初析出温度（T_s）向高温方向偏移、失重速率峰值（DTG_max）显著增大;在氮气气氛下,物料热失重时有2个失重峰,前后2个峰的失重率分别为31%和59%左右,在空气气氛下,有3个失重峰,前2个峰失重率分别在44%～59%和31%～46%之间.同时,结合同步傅立叶变换红外光谱仪对各个条件下的气体产物进行了定性分析,并对其中的CO、CO₂、H₂O和CH₄进行了定量分析.实验发现,模拟医疗废物在2种气氛下热失重主要阶段的产物种类相似,都检测到了CO₂、CO、烷烃类、醛类、羧酸、醇类和烯烃的特征吸收峰.并且,结果显示升温速率和气氛条件对CO、CO₂、H₂O和CH₄的生成量都有影响.在热失重的主要阶段,水分含量随加热时间变化曲线上显示1个向下的峰,说明载气中原有水分参与了反应.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.