大气传导对暴露于臭氧条件下植物的影响

大气传导对暴露于臭氧条件下植物的影响钱茜唐新德（济南军区环境监测中心站济南２５０００２）１概述在永久性草地生态系统上对Ｏ３生成物浓度和Ｏ３通量密度测定，其结果可作为制订大气质量指标或标准的依据。利用一模拟电阻在标准测量高度测定Ｏ３生成物浓度和大气扩散...     

城市生活垃圾厌氧消化技术

随着我国经济的发展。城市生活垃圾污染越来越严重。本文阐述了城市生活垃圾生物处理技术以及其特点。着重分析说明了厌氧消化的原理以及处理生活垃圾的影响因素，最后介绍了几种国外常用的厌氧处理工艺。     

泰州市环境空气中挥发性有机物分布特征

于2018年4—9月对泰州市环境空气中挥发性有机物(VOCs)组分开展现场观测,结合观测数据分析该市大气中VOCs的时空分布特征。结果表明:观测期间泰州市环境空气中VOCs平均摩尔比为45.1 nmol/mol,其中含氧挥发性有机物占比为57.8%;受周边排放源和地理位置影响,下风向点位的VOCs测定值高于其他点位;VOCs月均最高值出现在6月,与臭氧月均最高值出现时间一致,7—9月气团出现老化,导致臭氧生成能力减弱;观测期间VOCs中甲苯/苯(T/B)比值范围为0.201 9～5.130 3,且大部分T/B比值2,说明溶剂、油气和液化石油气挥发等排放源对泰州市环境空气中VOCs的影响较为显著。     

甘肃火电机组二氧化硫控制措施探讨

针对甘肃火电机组燃煤煤质特点，比较系统地分析了国内几种常用脱硫工艺在甘肃地区应用的可行性，并就选择二氧化硫控制措施时应注意的几个因素进行了分析和探讨。     

UNITANK工艺在中、小型污水处理站的应用

介绍了UNITANK工艺的基本构造、运行方式和技术特点及在新疆盐湖制盐有限公司生活污水处理站的应用实例，经过两年的实际运行表明，该工艺应用于中、小型生活污水处理站技术、经济合理，易于管理操作，具有良好的应用前景。     

专家系统在废水生物处理操作和控制中的应用

本文介绍了国外近二十年来专家系统在废水生物处理工艺控制领域的应用及开发的典型系统，分析了废水生物处理工艺难于控制的原因，各类系统的结构和特点及目前废水处理专家系统系统的不足，探讨了废水生物处理专家系统今后深入研究的问题及方向。     

不锈钢壳体的冷挤压工艺及模具设计

壳体是机械中广泛使用的重要零件之一.采用冷挤压工艺可提高质量、降低成本.对不锈钢壳体成形工艺及模具设计作了详细讨论.     

浅谈海水游泳馆的泳池水消毒

在游泳池循环水处理的消毒工艺中，一般采用传统的氯化消毒．但氯化消毒是否适合日益发展的海水游泳馆的池水消毒，笔者从几种泳池消毒工艺的特点，应用发展情况，设备的投资和运行费用等角度，阐明海水游泳馆宜采用臭氧消毒工艺．     

Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.