Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.     

pH和络合剂对五价锑在水钠锰矿和水铁矿表面吸附行为的影响

研究了pH和络合剂对Sb(Ⅴ)在水钠锰矿和水铁矿表面吸附性能的影响.结果表明,水钠锰矿和水铁矿对Sb(Ⅴ)有良好的去除效果,初始pH显著影响水钠锰矿和水铁矿对Sb(Ⅴ)的去除效率.随着初始pH值的降低,水钠锰矿和水铁矿对Sb(Ⅴ)的去除率显著增加.在初始pH 5.0时,Sb(Ⅴ)的去除率、吸附速率和吸附量要优于pH 7.0和9.0.Sb(Ⅴ)在水钠锰矿和水铁矿表面的吸附行为符合准二级动力学模型.在初始pH 5.0时,Langmuir模型可以较好地描述Sb(Ⅴ)在水钠锰矿和水铁矿表面的吸附过程.柠檬酸和乙二胺四乙酸(EDTA)两种络合剂显著抑制了Sb(Ⅴ)在水钠锰矿和水铁矿表面的吸附效果.     

重庆市主城区大气细颗粒物污染特征与来源解析

重庆市主城区大气细颗粒物(PM_(2.5))浓度从1990s的100μg·m~(-3)下降至当前的约70μg·m~(-3),但仍高于环境标准限值.为探讨重庆市主城区PM_(2.5)化学组成与来源特征,于2012—2013年在渝北区大气超级站利用四通道采样仪连续采集了颗粒物样品,分析了其中水溶性离子、碳质组分和无机元素含量.采样期间,重庆市主城区大气PM_(10)和PM_(2.5)的年日均浓度分别为103.9和75.3μg·m~(-3),扩散条件不利的冬季,细颗粒物污染较为严重.受静稳天气影响的1月和2月,受沙尘影响的3月,及二次转化显著的6月是重庆市细颗粒物污染较重的月份.重庆市PM_(2.5)组成以有机物(OM,30.8%)为主,其次为硫酸盐(SO_4~(2-),23.0%)、硝酸盐(NO_3~-,11.7%)、铵盐(NH_4~+,10.9%)、地壳物质(Soil,8.2%)、元素碳(EC,5.2%)、K~+(1.1%)、Cl~-(1.0%)和微量元素(Trace,0.6%).较高的SO_4~(2-)浓度和逐步上升的[NO_3~-]/[SO_4~(2-)]比值反映了重庆市燃煤污染较重,同时机动车污染比例逐步增加.采用主因子分析/绝对主因子得分法解析了重庆城区细颗粒物5类主要来源是:二次粒子(41.7%)、燃煤(15.6%)、建筑/道路尘(12.4%)、土壤尘(11.0%)和工业尘(10.4%),通过各污染源季节变化及与其他结果对比,该源解析结果能够较可靠反映重庆市细颗粒物的来源信息.     

凹凸棒石的表面修饰及对水中Cr（Ⅵ）吸附动力学和热力学的研究

以壳聚糖为生物质碳源,采用一步水热碳化法对凹凸棒石表面进行有机修饰,并采用扫描电镜(SEM)、拉曼(Raman)光谱、元素分析(EA)、X光电子能谱(XPS)、Zeta电势分析、热重分析(TGA)等对改性凹凸棒石进行表征分析.同时,通过静态吸附实验,研究了改性凹凸棒石对Cr(Ⅵ)吸附去除的性能,考察了温度对吸附性能的影响,探讨了吸附动力学和热力学规律.结果表明,改性凹凸棒石表面富含含氧基团和氨基等活性基团;对总铬的吸附行为符合准二级动力学方程;表观吸附活化能为13.4 k J·mol~(-1),表明既有静电吸附,也有配位吸附,且以静电吸附为主;对总铬的吸附等温线符合Langmuir方程.在温度为298、308、318和328 K时,最大吸附量分别为203.3、232.6、267.4和322.6 mg·g~(-1),说明改性凹凸棒石是一种新型环保高性能的除铬材料.在研究的温度范围内,ΔH~0为19.8 k J·mol~(-1),ΔG~0为-19.5~-23.7 k J·mol~(-1),ΔS~0为72.1~131.8 J·mol~(-1)·K~(-1),表明该吸附是一吸热的、自发的、熵增过程.     

氢氧化镁对水中As（Ⅲ）的吸附作用

以氢氧化镁为吸附材料,通过单因素实验分别考察了氢氧化镁投加量、pH、温度、吸附时间对吸附效果的影响。研究了氢氧化镁对As（Ⅲ）的吸附热力学和动力学特性,并对作用机理进行了探讨。结果表明：在砷初始浓度为0.5～100 mg/L之间,温度为25℃,pH为3,氢氧化镁投加量为0.5～4 g,吸附时间为1 h的条件下,氢氧化镁...     

发达国家（地区）农业现代化进程中农户与市场对接模式比较

通过对美国、日本、法国、我国台湾地区农户与市场对接模式的比较,发现依靠中间组织——农协、企业、农业合作组织等实现了农业流通现代化。基于此,结合我国农业现状和具体国情,提出从政府引导、农产品流通的组织建设、加强市场监管力度三个方面来实施我国农户与市场的对接,从而加快我国农业流通现代化进程和农业经济的可持续发展。     

IC反应器处理MTO废水的中试研究

中试研究了内循环(IC)反应器处理甲醇制烯烃(MTO)废水的启动和运行过程,同时考察了颗粒污泥的性状及沼气产量的变化情况。试验过程运行稳定,系统抗冲击性强。以絮状污泥为接种污泥,经过131 d的启动和运行,IC反应器的COD去除负荷可达10 kg/(m~3·d)以上,COD去除率可达90%以上。IC反应器中的成熟颗粒污泥形状规则、密实、粒径大、沉降速率快。IC反应器的沼气产量符合理论预期。     

离子液体对废旧印刷线路板中铜、锌、铅的浸出规律

以离子液体1-丁基磺酸-3-甲基咪唑三氟甲烷磺酸盐([BSO_3HMIm]OTf)为浸出剂,初步研究了WPCBs浸铜过程中锌和铅浸出率的影响因素。实验结果表明:铜、锌的浸出率随着WPCBs粒径的减小、H_2O_2溶液加入量的增大而增大,铜的浸出率随浸出温度的升高先增大后减小,锌的浸出率受浸出温度影响不大;铅的浸出率受5种因素影响不大,且总体处于较低水平。在WPCBs粒径为0.100~0.250 mm、离子液体加入量为60.0%(φ)、H_2O_2溶液加入量为7.5%(φ)、固液比为1∶15、浸出温度为50℃的条件下,铜、锌、铅的浸出率分别为99.84%,93.25%,22.46%。     

厌氧流化床处理白酒废水运行参数的研究

研究了床层膨胀率、HRT、温度以及有机容积负荷冲击等因素对AFB反应器COD去除率的影响。结果显示:温度为32±2℃,进水COD 6 000 mg/L,pH7.2条件下,AFB反应器处理白酒废水的优化运行参数为床层膨胀率为36%,回流比1∶7,水力停留时间8 h,此时废水COD去除率可达80%左右;同时该反应器在有机容积负荷达到36.1 kg COD/(m3.d)时COD去除率明显下降。