Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

钢渣吸附Pb2+的动力学研究

采用批式振荡吸附法研究了钢渣吸附Pb^2＋的动力学。研究结果表明,钢渣吸附Pb^2＋的动力学控制步骤（简称动力学控制步骤）随实验条件的变化而变化：钢渣粒径大于120μm、振荡器转速小于150r/min或Pb^2＋初始质量浓度小于150mg/L时,孔扩散是动力学控制步骤;钢渣粒径小于120μm、振荡器转速大于150r/min或Pb^2＋初始质量浓度大于150mg/L时,表面扩散是动力学控制步骤;钢渣对Pb^2＋的吸附反应是二级反应,其吸附速率为13.26g/（mg.min）。     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。     

日本钢铁工业发展循环经济简介

介绍日本钢铁工业发展循环经济的实践经验和主要做法，与之相比，指出我国钢铁工业发展循环经济存在的差距，并提出我国钢铁工业依法率先发展循环经济应采取的主要措施。     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

利用钢铁盐酸酸洗废液在填料塔中制备FeCl3

以钢铁盐酸酸洗废液为原料，亚硝酸钠为催化剂，氧气为氧化剂，在填料塔中催化氧化制备三氯化铁。考察了反应温度、催化剂加入量和添加方式、循环流量等对制备三氯化铁的影响。实验结果表明，在优化的工艺条件为料液预热温度为60 ℃、催化剂加入量为钢铁盐酸酸洗废液总质量的0.30%、料液循环流量6.0 m³/h的条件下，反应80~120 min，酸洗废液中的Fe²⁺完全氧化为Fe³⁺。     

钢渣吸附处理苯酚废水的研究

采用恒温振荡的方法,考察了钢渣粒径、吸附温度、振荡速度、溶液pH值、溶液初始浓度对苯酚去除率的影响。结果表明,在粒径为120~180目、pH=4.0、苯酚溶液浓度在500 mg/L以内、苯酚/钢渣质量比为1∶1 000时吸附效果最好。钢渣对苯酚的吸附能较好地符合Langmuir和Freundlich吸附等温线,线性相关系数分别为0.9971和0.9916,吸附机理为表面吸附。     

Challenges with eradicating illegal mining in Ghana: A perspective from the grassroots

This paper argues that artisanal mining communities are somewhat bound to their operations, and helps explain why formalisation, alternative livelihood projects and military intervention—the traditional strategies employed by governments to tackle illegal mining—have proved ineffective. Findings from recent research carried out in Noyem (Eastern Region of Ghana) are used to illustrate why illegal artisanal mining is such a deeply rooted activity in sub-Saharan Africa. The analysis provides four explanations in support of this: a heavy involvement of traditional leaders in operations; the mindsets of many operators toward alternative income-earning activities; the numerous and diverse range of employment opportunities provided by the sector; and the level of investment in operations.     

河北省钢铁工业主要大气污染物减排潜力分析

通过对河北省钢铁工业存在问题的分析,得出我省钢铁行业主要大气污染物为二氧化硫和粉尘.结合我省钢铁企业的实际情况,从工程技术、政策管理等方面提出相应治理措施,并对"十一五"期间我省钢铁行业二氧化硫和粉尘减排效益进行预测.预测结果显示:采用所建议的减排措施后,我省钢铁工业二氧化硫减排量对全省"十一五"减排计划的贡献率为81.4%;粉尘可减排60%.     

SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。