Influence of extracellular polymeric substances (EPS) on Cd adsorption by bacteria

The role of extracellular polymeric substances (EPS) in Cd adsorption by Bacillus subtilis and Pseudomonas putida was investigated using a combination of batch adsorption experiments, potentiometric titrations, Fourier transform infrared spectroscopy (FTIR). An increased adsorption capacity of Cd was observed for untreated bacteria relative to that for EPS-free bacteria. Surface complexation modeling of titration data showed the similar pK_a values of functional groups (carboxyl, phosphate and hydroxyl) between untreated and EPS-free bacteria. However, site concentrations on the untreated bacteria were found to be higher than those on the EPS-free bacteria. FTIR spectra also showed that no significant difference in peak positions was observed between untreated and EPS-free bacteria and carboxyl and phosphate groups were responsible for Cd adsorption on bacterial cells. The information obtained in this study is of fundamental significance for understanding the interaction mechanisms between heavy metals and biofilms in natural environments.     

Characterization of an adsorbed humin-like substance on an allophanic soil formed via catalytic polycondensation between catechol and glycine, and its adsorption capability to pentachlorophenol

An allophanic soil (AS) catalyzed the formation of dark-colored polymers via polycondensation reactions between catechol and glycine. The organic carbon content of the AS was increased from 0.16% to 1.3%, indicating that some of the dark-colored polymers had been adsorbed to the AS. The characteristics of the dark-colored polymers adsorbed on the AS were similar to those of a humin that is not extractable with an aqueous alkaline solution. Such a humin-like substance (HuLS) was separated from the AS by treatment with a mixture of HF and HCl. The HuLS and humic acid-like substance (HaLS), comprising the acid-insoluble fraction in the reaction mixture, were characterized by elemental analysis, size exclusion chromatography, pyrolysis-GC/MS and ¹³C NMR. However, the structural features of HaLS and HuLS had many points in common. These results suggest that HuLS-AS can be regarded as an organo-clay complex formed by the strong adsorption of HaLS to the AS. The adsorption of pentachlorophenol (PCP) to AS and HuLS-AS was examined at pH 5.5. At this pH, the zeta potential of the HuLS-AS showed a negative value. It would, therefore, be expected that pentachlorophenolate anions would adsorb with difficulty to HuLS-AS because of electrostatic repulsion. Nevertheless, the adsorption coefficient for PCP to HuLS-AS, as estimated by the Freundlich isotherm, was seven times larger than that for AS. These results show that HuLS, when adsorbed on the AS surface, has the capability to enhance the adsorption of PCP.     

Floatability of polymer materials modulated by frothers

Flotation tests of 35 polymer materials were carried out to investigate their floatability modulated by frothers. Results of flotation tests demonstrated that polymer resins and soft PVC showed high floatability, floatability of hard PVC plastics was relatively low and was related to the frothers, and there exists significant difference in the floatability of different post-consumer plastics. Flotation rate of post-consumer plastics varies from 0% to 100%. Furthermore, three-category low-energy surface (LES) was defined based on the hydrophile index of the materials involved in this paper, and an adsorption model was proposed to explain the results of flotation and to discuss the floatability of polymer materials modulated by frothers. Frother molecules are prone to adsorb on the surface of bubble rather than LES at relatively low concentration, bubble adsorbed by frother molecules is prone to approach first-category LES rather than third-category LES, and the structure of liquid film is formed on the first-category LES at large concentration. Floatability of polymer materials modulated by frothers is further discussed: frothers increase the floatability of the first-category LES but decrease the floatability of the third-category LES, while the floatability of the second-category LES is related to the type of frothers.     

Evaluation of PCDD/F oxidation catalysts: confronting studies on model molecules with tests on PCDD/F-containing gas stream

Titania supported vanadium oxide is a renowned catalyst for the abatement of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) from gas effluents. To develop more active formulations, researchers mainly rely on lab-scale experiments on “PCDD/Fs-mimicking substances”, like (chloro)-benzene. Using such model compounds is convenient whereas handling PCDD/Fs in the laboratory is potentially hazardous and complicated. Recent studies, however, challenged some foremost conclusions of model compound based studies, starting from the observation that different model compounds gave contrasted results. Thus the present work aims at confronting some of these dubious conclusions with direct experimental tests on PCDD/Fs. One reference V₂O₅/TiO₂ catalyst and three modified formulations (V₂O₅/TiO₂-SO₄, V₂O₅-MoO₃/TiO₂, and V₂O₅-WO₃/TiO₂) have been evaluated. A dedicated apparatus was used which allows safe and reliable tests on a mixture of PCDD/Fs congeners. Some of the previously proposed catalyst improvement strategies actually prove to be disadvantageous in the removal of PCDD/Fs. In particular, MoO₃- and WO₃-modified catalysts were significantly less active than the reference catalyst. These observations show that conclusions from model compound based studies must be drawn with care and should ideally be confronted with tests on the actual target pollutants.     

Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

基于吸附原理的双路独立汞采样方法

参照美国EPA 30B方法,基于吸附原理,研制了用于燃煤燃烧源排放烟气中总气态汞的双路独立采样系统,结合热解析分析技术,现场测试结果符合30B方法的质控指标要求。建议加大国产吸附管的研制力度,开发适用于中国工况的汞采样器。     

Aluminum water treatment residuals as permeable reactive barrier sorbents to reduce phosphorus losses

Two aluminum water treatment residuals (Al-WTRs) from water treatment plants in Manatee County, FL and Punta Gorda, FL were evaluated as potential permeable reactive barrier (PRB) media to reduce groundwater phosphorus (P) losses. Short-term (<24 h) P sorption kinetics and long-term P sorption capacity were determined using batch equilibration studies. Phosphorus desorption was characterized following P loadings of 10, 20, 30, 40 and >70 g kg⁻¹. Sorption and desorption studies were conducted on the <2.0 mm material and three size fractions within the <2.0 mm material. The effect of dissolved organic carbon (DOC) on P retention was determined by reacting Al-WTRs with P-spiked groundwater samples of varying initial DOC concentrations. Phosphorus sorption kinetics were rapid for all size fractions of both Al-WTRs (>98% P sorption effectiveness at shaking times ?2 h). The effect of DOC was minimal at <150 mg DOC L⁻¹, but modest reductions (<22%) in P sorption effectiveness occurred at 587 mg DOC L⁻¹. The P sorption capacities of the Manatee and Punta Gorda Al-WTRs (<2.0 mm) are ∼44 g kg⁻¹ and >75 g kg⁻¹, respectively, and the lifespan of an Al-WTR PRB is likely many decades. Desorption was minimal (<2% of the P sorbed) for cumulative P loadings <40 g kg^-l, but increased (<9% of the P sorbed) at cumulative P loads >70 g kg⁻¹. The <2.0 mm Manatee and Punta Gorda Al-WTRs are regarded as ideal PRB media for P remediation.     

Study of Ni adsorption on NKF-6 zeolite

The adsorption of ⁶³Ni from aqueous solutions using NKF-6 zeolite was investigated by a batch technique under ambient conditions. The adsorption was investigated as a function of contact time, pH, ionic strength, foreign ions, humic substances (FA/HA) and temperature. The kinetic adsorption was well described by the pseudo-second-order rate equation. The adsorption of ⁶³Ni on NKF-6 zeolite was strongly dependent on pH and ionic strength, and the adsorption of ⁶³Ni increased with increasing NKF-6 zeolite content. At low pH values, the presence of FA enhanced the adsorption of ⁶³Ni on NKF-6 zeolite, but the presence of HA had no drastic effect. At high pH values, the presence of FA or HA decreased the adsorption of ⁶³Ni on NKF-6 zeolite. The adsorption isotherms were well represented by the Langmuir model. The thermodynamic parameters (i.e., ΔH⁰, ΔS⁰and ΔG⁰) for the adsorption of ⁶³Ni were determined from the temperature dependent isotherms at 293.15, 313.15 and 333.15 °K, respectively, and the results indicate that the adsorption reaction was favored at high temperature. The results suggest that the adsorption process of ⁶³Ni on NKF-6 zeolite is spontaneous and endothermic.     

The ratio of clay content to total organic carbon content is a useful parameter to predict adsorption of the herbicide butachlor in soils

Thirteen soils collected from 11 provinces in eastern China were used to investigate the butachlor adsorption. The results indicated that the total organic carbon (TOC) content, clay content, amorphous Fe2O3 content, silt content, CEC, and pH had a combined effect on the butachlor sorption on soil. Combination of the data obtained from the 13 soils in the present study with other 23 soil samples reported by other researchers in the literature showed that Koc would be a poor predictive parameter for butachlor adsorption on soils with TOC content higher than 4.0% and lower than 0.2%. The soils with the ratio of clay content to TOC content (RCO) values less than 60 adsorbed butachlor mainly by the partition into soil organic matter matrix. The soils with RCO values higher than 60 apparently adsorbed butachlor by the combination of the partition into soil organic matter matrix and adsorption on clay surface.