含氨氮催化剂生产废水的处理

采用加入淀粉的短程硝化-反硝化一体化技术处理低碳含NH3-N催化剂废水。通过中试确定了适宜的工艺参数，并在工业化装置上进行了验证。试验结果表明：在DO为0.5 mg/L左右、淀粉加入量为0.25 kg/ m3、HRT=30 h的条件下，短程硝化-反硝化一体化技术具有较好的处理效果，NH3-N去除率大于97%，且具有较强的抗冲击负荷的能力； 出水的COD<100 mg/L，ρ（NH3-N）<10 mg/L，达到GB 8978—1996《污水综合排放标准》的一级排放标准。工业化装置的运行费用以NH3-N计为2.3 元/kg、以废水计为4.6 元/t。该法适用于中低浓度（ρ（NH3-N）<300 mg/L）废水的处理。     

Comparing Costs of Onsite Best Management Practices to Nutrient Credits for Stormwater Management: A Case Study in Virginia

Best management practices (BMPs) are widely used to mitigate impacts of increased impervious surfaces on stormwater runoff. However, there is limited detailed and up‐to‐date information available on the cost of designing, constructing, and maintaining BMPs over their lifetime. The objective of this study is to analyze BMPs recently constructed by the Virginia Department of Transportation (VDOT) to quantify their total cost per pound of phosphorus removed annually. A motivating factor for the study is recent changes to regulatory guidelines in Virginia which allow for full or partial substitution of purchased nutrient credits in lieu of constructing onsite BMPs to achieve compliance with stormwater quality regulations. Results of the analysis of nine BMPs found their cost ranged from $20,100 to $74,900, in 2014 dollars, per pound ($44,313‐$165,126 per kg) of phosphorus removed. Based on these results and assuming current credit prices procured by VDOT, purchasing nutrient credits is a cost‐effective option for the agency, especially when factoring in the cost of additional right of way for the BMP. Based on this finding, we expect compliance with stormwater quality regulations through credit purchases to become more widely used in Virginia. Moving forward, we suggest more direct tracking of BMP costs to support comparisons between BMP costs across a range of types and conditions to credit purchases for meeting stormwater regulations.     

高氯酸钾项目生产过程中的环境风险及防范措施

根据国家环保总局发布的"高污染、高环境风险"产品名录(2009年),无机盐产品高氯酸钾属于高环境风险的产品,其生产存在较大风险。高氯酸钾项目在生产过程中的环境风险主要来源于强酸、强碱、有毒有害、易燃易爆等原辅材料、产品,运输、贮存和使用过程产生的燃爆、泄漏、贮运风险以及工艺废气治理措施失效等环节。识别项目产生的环境风险主要包括爆炸风险、泄漏风险、危险化学品贮运风险及氯气直排风险,并从生产管理、生产工艺及贮运等方面提出相应的防范措施。     

A Multilevel Model of the Impact of Farm‐Level Best Management Practices on Phosphorus Runoff1

Abstract: Multilevel or hierarchical models have been applied for a number of years in the social sciences but only relatively recently in the environmental sciences. These models can be developed in either a frequentist or Bayesian context and have similarities to other methods such as empirical Bayes analysis and random coefficients regression. In essence, multilevel models take advantage of the hierarchical structure that exists in many multivariate datasets; for example, water quality measurements may be taken from individual lakes, lakes are located in various climatic zones, lakes may be natural or man‐made, and so on. The groups, or levels, may effectively yield different responses or behaviors (e.g., nutrient load response in lakes) that often make retaining group membership more effective when developing a predictive model than when working with either all of the data together or working separately with the individuals. Here, we develop a multilevel model of the impact of farm level best management practices (BMPs) on phosphorus runoff. The result of this research is a model with parameters which vary with key practice categories and thus may be used to evaluate the effectiveness of these practices on phosphorus runoff. For example, it was found that the effect of fertilizer application rate on farm‐scale phosphorus loss is a function of the application method, the hydrologic soil group, and the land use (crop type). Further, results indicate that the most effective method for controlling fertilizer loss is through soil injection. In summary, the resultant multilevel model can be used to estimate phosphorus loss from farms and hence serve as a useful tool for BMP selection.     

Willingness to pay and demand elasticities for two national parks: empirical evidence from two surveys in Pakistan

Using survey-based data approach for modeling the demand for environmental goods/resources, this study estimates income and price elasticities of demand for improved environmental quality of two National Parks in Northern Pakistan. The study uses data from two studies. The estimates indicate that improved environmental quality effects can be described as a luxury and an ordinary and price elastic service. Confidence intervals show however that the classification as a luxury is not statistically significant. Income elasticities of willingness to pay are estimated for a broad range of environmental services. The study finds that income and willingness to pay vary directly and significantly. The elasticity estimates, in general, are greater than zero, but less than unity. The study concludes that environmental improvements are more beneficial to low-income groups than for high-income groups.

Development of a Quantitative Pasture Phosphorus Management Tool Using the SWAT Model1

Abstract: Assessment tools to evaluate phosphorus loss from agricultural lands allow conservation planners to evaluate the impact of management decisions on water quality. Available tools to predict phosphorus loss from agricultural fields are either: (1) qualitative indices with limited applicability to address offsite water quality standards, or (2) models which are prohibitively complex for application by most conservation planners. The purpose of this research was to develop a simple interface for a comprehensive hydrologic/water quality model to allow its usage by farmers and conservation planners. The Pasture Phosphorus Management (PPM) Calculator was developed to predict average annual phosphorus (P) losses from pastures under a variety of field conditions and management options. PPM Calculator is a vastly simplified interface for the Soil and Water Assessment Tool (SWAT) model that requires no knowledge of SWAT by the user. PPM Calculator was validated using 33 months of data on four pasture fields in northwestern Arkansas. This tool has been extensively applied in the Lake Eucha/Spavinaw Basin in northeastern Oklahoma and northwestern Arkansas. PPM Calculator allows conservation planners to take advantage of the predictive capacity of a comprehensive hydrologic water quality model typically reserved for use by hydrologists and engineers. This research demonstrates the applicability of existing water quality models in the development of user friendly P management tools.     

Australia and Russia: How do their environmental policy processes differ?

This paper focuses on comparative review and analysis of the systems of environmental protection, national environmental strategies and fundamentals of environmental legislation in Australia and the Russian Federation. These countries have many socioeconomic similarities, such as low population densities and richness in natural resources which are largely exported. The main disparity between Australia and Russia is in the types of economy. This paper ‘continues’ the sequence of recent scholarly publications on comparison of various features of environmental policies in the countries from all over the world. Comparative analysis in this research has been based on examination of scholarly publications, legislation, government documents, mass media sources and NGO responses. The analysis has revealed a number of differences including top-down implementation of policies in Russia whereas in Australia, each State (Territory) implements policies with significant independence from the Commonwealth Government. At the same time, similarities between the countries have been identified: for example, in deficits in the budget of local environmental authorities and in the presence of contradictions in legislation at national and regional levels of government. Suggestions resulting from this analysis include further integration of sustainable development strategies at all levels of Australian government to encourage further protection of the environment and, for Russia, creating a separate Ministry of Environmental Protection. These approaches should assist facilitation of sustainable development for both nations. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Development and Use of a Sedimentation Risk Index for Unpaved Road‐Stream Crossings in the Choctawhatchee Watershed1

Abstract: Unpaved road‐stream crossings increase sediment yields in streams and alter channel morphology and stability. Before restoration and sedimentation reduction strategies can be implemented, a priority listing of unpaved road‐stream crossings must be created. The objectives of this study were to develop a sedimentation risk index (SRI) for unpaved road‐stream crossings and to prioritize 125 sites in the Choctawhatchee watershed (southeastern Alabama) using this model. Field surveys involved qualitative and quantitative observations of 73 metrics related to waterway conditions, crossing structures, road approaches, and roadside soil erosion. The road‐stream crossing risk analyses involved elimination of candidate metrics based on redundancy, skewness, lack of data, professional judgment, lack of nonzero values, unbalanced box plots, and limited ranges of values. A final selection of 12 metrics formed the SRI and weighed factors involving soil erodibility, road sedimentation abatement features, and stream morphology alteration. The SRI was organized into narrative categories (excellent, good, fair, poor, and very poor) based on the distribution of scores. No excellent sites (scores ≥55) were found in this study, 17 (20.7%) were good (low sedimentation risk), 37 (45.1%) were fair (moderate sedimentation risk), 26 (31.7%) were poor (high sedimentation risk), and two (2.5%) were very poor (high sedimentation risk). There was no significant difference in SRI scores among crossing structure type (round culverts, box culverts, and bridges) (H = 4.31, df = 2, p = 0.058). A future study of the Choctawhatchee watershed involving the same study sites could assess the success of restoration plans and activities based on site score improvement or decline.     

Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

试论新疆工业发展与清洁生产水平及潜力分析

通过对新疆工业产业结构、规模、资源配置优化程度、工业发展区域等工业现状及其发展趋势分析,从宏观的角度以实例对新疆工业的清洁生产水平及新疆工业重点行业清洁生产潜力进行分析,提出新疆清洁生产总体发展思路,为新疆经济管理部门、环境管理部门贯彻《清洁生产促进法》,制定相应的清洁生产政策和法规提供参考。