低压下聚乙烯绝缘层导线火蔓延熔融滴落实验分析

低压导线火蔓延的研究对于飞机和航天器的防火安全具有重要意义。针对镍铬合金线芯、聚乙烯(PE)绝缘层导线火蔓延过程中的熔融滴落现象,在低压舱内开展了不同气压、不同氧气浓度的大量实验研究,获得了导线熔融滴落频率、质量和火蔓延速度,以及不同氧浓度熔融滴落的上下限。结果表明:(1)在熔融滴落过程中,由于滴落会产生向上的动量,从而使火焰在滴落后发生突然的"跳动"现象,火焰高度先增加后降低;(2)滴落上限和滴落下限随着氧浓度的增加而降低,并且可以划分为3个不同的区域:火蔓延仅存区;滴落和火蔓延共存区;无滴落无火蔓延区。滴落上限和滴落下限下降曲线在50%氧浓度、5kPa压力发生会合,此后只有火蔓延而不存在滴落现象。(3)当压力降低时,由于线芯温度增加,线芯传导热量增加,导致绝缘层熔融速率加快,从而使得滴落频率增加,同时液滴的表面张力随着压力的降低而增加,使得低压下液滴的质量变大。     

The relationship between oxygen consumption rate and temperature during coal spontaneous combustion

Spontaneous combustion is a major natural disaster in coal production. In the process of exploring coal self-ignition, a series of hypotheses have been put forward, most scholars agree that the current coal-oxygen compound theory. Oxygen consumption rate reflects the status of coal spontaneous combustion, and it is also one of the parameters necessary for numerical simulation of coal spontaneous combustion. In this paper, a coal heating and oxidation experiment was designed, Experimental device consists of heating and oxidation furnace, gas chromatograph, temperature control and data acquisition systems and other equipment components. Three coal samples whose weight each is 5 g were selected for the study. By experiment, oxygen concentration at the inlet and outlet of temperature oxidation furnace was measured. Oxygen consumption rate is calculated in the heating process of coal according to air flow. In the Cartesian coordinate system, the temperature as abscissa and the oxygen consumption rate for the longitudinal coordinates, drawing the relationship between oxygen consumption rate and temperature plot. And then regression analysis was used to analyze the relationship between oxygen consumption rate and coal temperature during the heating and oxidation process of coal. The results show that the oxygen consumption rate and temperature of coal were linear relationships both before and after the critical temperature when the coal temperature is less than 180 °C. Before the critical temperature oxygen consumption rate is low, however it increases rapidly when coal temperature reaches a critical temperature. The result is important for the prevention and treatment of spontaneous combustion of coal.     

Simulating the dynamics of sulfur species and zinc in wetland sediments

In situ measurements comparing vertical SO₄²⁻ profiles in vegetated and non-vegetated sediments showed that SO₄²⁻ concentrations in vegetated sediments increased significantly at the beginning of the growing season and then gradually decreased during the rest of the growing season. Throughout the growing season, SO₄²⁻ concentrations remained higher in the vegetated sediments than in the sediments without plants. The higher SO₄²⁻ concentrations in the vegetated sediments indicate that oxygen release from roots and evapotranspiration-induced advection by plants play an important role in the dynamics of sulfur species in sediments. Since the total pool of solid-phase sulfide is relatively large compared to the mass of SO₄²⁻ in the sediments, the gradual decrease of SO₄²⁻ concentrations may result from limitation of the solid-phase sulfide that is in direct contact with or very close to the roots and rhizomes. This would mean that the main pool of solid-phase sulfide and associated trace metals are not affected by the oxygen release from roots, and the associated trace metals will not become bioavailable during the growing season.     

River water quality management model using genetic algorithm

Conventional mathematical programming methods, such as linear programming, non linear programming, dynamic programming and integer programming have been used to solve the cost optimization problem for regional wastewater treatment systems. In this study, a river water quality management model was developed through the integration of a genetic algorithm (GA). This model was applied to a river system contaminated by three determined discharge sources to achieve the water quality goals and wastewater treatment cost optimization in the river basin. The genetic algorithm solution, described the treatment plant efficiency, such that the cost of wastewater treatment for the entire river basin is minimized while the water quality constraints in each reach are satisfied. This study showed that genetic algorithm can be applied for river water quality modeling studies as an alternative to the present methods.     

全程自养脱氨氮悬浮填料床反应器性能的研究

以NH+4-N溶液为基质建立和启运了全程自养脱氨氮悬浮填料床反应器,反应器连续运行的实验结果表明在pH为8.0～8.5、溶解氧为0.7～1.0mg/L和温度为28℃的条件下.当氨氮表面负荷为2～2.5g/(m2@d)时,其表面去除速率为1.1～1.3/(m2@d),全程自养脱氮率基本稳定在55%左右;全程自养脱氮的最适pH范围为7.5～8,5,其中最佳pH为8.0左右;最适溶解氧范围为0.5～1.5mg/L,其中尤以0.8～1.0ms/L左右为最佳.     

制氧机组噪声综合治理技术

冶金行业制氧机组噪声呈中低频特性，其声源诊断甚为困难，本文以河北省某钢铁集团公司为例，对制氧机组噪声及振动机理和特性进行了探讨。     

两种曝气设备的清水曝气充氧实验研究

根据清水充氧实验计算,比较了微孔雾化软管曝气和射流曝气的充氧动力效率和氧利用率.以及后续实验的结果,最终得出微孔曝气软管曝气是高效节能的河流整治方法.     

高速微涡活性污泥法提高氧利用效率的研究

概述了高速微涡活性污泥法的工艺特点，并对该法提高氧的转移及利用效率进行了研究和机理分析。     

SBR工艺设计经验探讨

提出了SBR工艺中,反应池容积、反应时间以及需氧量的计算方法和设计经验。同时,在研读和对比国内外相关资料的基础上,探讨了SBR工艺发生污泥膨胀的可能性和原因,介绍了控制方法与措施。     

香料生产废水的生化处理研究

某合成洋茉莉醛香料厂的生产废水中含有香料、香料副产品、降解物以及原辅材料,具有CODcr浓度高、水质波动大以及水中污染物成分复杂等特点,属于典型的高浓度难降解有机废水,而该厂现有的废水处理工艺不仅流程长、费用高且出水难以达到GB8978—1996一级排放标准。本文采用活性污泥法及MBR工艺研究了洋茉莉醛香料废水的处理效果及其影响因素,并结合GC—MS对降解产物进行了分析。试验结果表明：采用本文方法对洋茉莉醛香料废水有较好的降解作用,可经较少的步骤处理实现达标排放。