Incorporating layer- and local-scale heterogeneities in numerical simulation of unsaturated flow and tracer transport

This study characterizes layer- and local-scale heterogeneities in hydraulic parameters (i.e., matrix permeability and porosity) and investigates the relative effect of layer- and local-scale heterogeneities on the uncertainty assessment of unsaturated flow and tracer transport in the unsaturated zone of Yucca Mountain, USA. The layer-scale heterogeneity is specific to hydrogeologic layers with layerwise properties, while the local-scale heterogeneity refers to the spatial variation of hydraulic properties within a layer. A Monte Carlo method is used to estimate mean, variance, and 5th, and 95th percentiles for the quantities of interest (e.g., matrix saturation and normalized cumulative mass arrival). Model simulations of unsaturated flow are evaluated by comparing the simulated and observed matrix saturations. Local-scale heterogeneity is examined by comparing the results of this study with those of the previous study that only considers layer-scale heterogeneity. We find that local-scale heterogeneity significantly increases predictive uncertainty in the percolation fluxes and tracer plumes, whereas the mean predictions are only slightly affected by the local-scale heterogeneity. The mean travel time of the conservative and reactive tracers to the water table in the early stage increases significantly due to the local-scale heterogeneity, while the influence of local-scale heterogeneity on travel time gradually decreases over time. Layer-scale heterogeneity is more important than local-scale heterogeneity for simulating overall tracer travel time, suggesting that it would be more cost-effective to reduce the layer-scale parameter uncertainty in order to reduce predictive uncertainty in tracer transport.     

城郊排水沟渠溶质传输的暂态存储影响及参数灵敏性

选择Na Cl为示踪剂,于2013年9~10月在合肥城郊的关镇河支渠开展5次瞬时投加示踪实验.从暂态存储、侧向补给和对流-扩散等作用机制层面,设置4种模拟情景,解析暂态存储作用对于排水沟渠溶质传输规律的影响,并对OTIS模型参数进行灵敏性分析.结果表明,暂态存储对于主流区Cl-模拟浓度穿透曲线(BTCs)峰值大小影响很大,相对偏差高达24.23%~117.26%,显著高于对峰值出现时间的影响,且暂态存储影响显著超过了侧向补给作用;由相关性分析,主流区Cl-模拟浓度BTCs峰值大小和出现时间的相对偏差与As/A具有极显著相关性;4个主要参数的灵敏度排序为AAsαD.     

示踪技术用于气体泄漏扩散模拟的多元线性回归分析

采用江苏工业学院油气储运安全综合实验模型平台,利用示踪技术(以CO2为示踪剂),模拟了有害气体瞬时泄漏扩散的整个过程.并结合多元线性回归分析的基本方法,定量分析了气体泄漏扩散过程,建立了多元线性回归模型,初步确定了泄漏气体浓度与相关物理量的变化关系,在此基础上得到了2个定量评价指标:确定性系数R=0.991,相关系数r=0.995.研究表明,在实验室建立的试验模型能较好地反映现实情况,模型仿真度较高,数据拟合效果较好.研究可为评价模型的相似性提供理论参考,对有害气体泄漏扩散事故应急救援、实施有效的现场控制,具有一定的科学参考价值.     

土壤和沉积物中重金属积累及其Pb、S同位素示踪

对榨子厂附近一个废弃多年的古老土法炼锌点土壤和沉积物中重金属的积累及污染程度进行了研究。研究区土壤、沉积物样品中Pb、Zn、Cd含量已大大高于该地区的背景值,zn的积累明显大于Pb的积累程度。相关分析表明,土壤和沉积物中Fe2O3对重金属有强烈的固定作用。沉积物和土壤中有很高的综合污染指数,显示出重金属的污染程度很高。化学形态分析表明重金属以碳酸盐结合态、残渣态和铁锰氧化物结合态为主,有效态所占的比例很低,但其含量并不很低,在酸性条件下,有释放导致污染的可能性。同位素示踪结果显示,研究区土壤和沉积物中积累的Pb、S为矿山物质来源。     

基于中性盐提取的土壤重金属固液分配与自由态金属离子浓度测定

采用0.01mol·L-1CaCl2、0.002mol·L-1Ca(NO3)2和纯水(UPW)3种常用提取剂对我国南方两种典型农田重金属污染土壤进行提取试验.同时,应用土壤重金属固液分配多表面模型来预测提取液中重金属含量,结合道南膜技术(DMT)测定Ca(NO3)2提取液中自由态金属离子浓度,并与ECOSAT模型计算值进行比较.结果表明,提取剂中Ca2+浓度增加能显著提高土壤重金属溶出率,而提取液pH、溶解态有机碳(DOC)浓度却随溶液Ca2+浓度增加而降低.多表面模型(Multi-Surface Model)对大部分提取液金属浓度有较好的预测效果,部分土样提取液Cu、Pb、Zn浓度的预测效果较差.DMT测定的Ca(NO3)2提取液自由态重金属浓度与模型计算值较为一致,能够较准确地测定土壤溶液自由态重金属离子浓度.     

海水中痕量元素测定及其在重金属污染源判别方面的应用

利用电感耦合等离子体质谱(ICP-MS)研究了胶州湾及莱州湾这两个海域中痕量元素污染水平,发展了ICP-MS海水环境中痕量元素的测定方法,同时找出海水环境中具有保守性的数种元素作为污染示踪元素.达到对于海水环境中痕量污染物被动示踪的目的.对18个真实样品进行了识别率试验,识别率可达90%以上,在选取3个海水样品及1个河水样品混合后的模拟分担率实验,也取得了满意的结果,其误差平均值仅有1.17%.     

Evaluation of trajectories calculated from ecmwf data against constant volume balloon flights during etex

This paper validates trajectories calculated from ECMWF analyses against the tracks of constant volume balloons (CVBs) released during the European tracer experiment (ETEX). The altitudes of the calculated trajectories were adjusted to the altitudes of the respective balloons in short intervals to allow direct comparisons. The agreement between the calculated trajectories and the balloon tracks was very good for the first experiment (individual errors from 1 to 26%, average 15%), and excellent (errors from 2 to 11%, average 6%) for the second one. The agreement for the second experiment was probably partly better because the CVBs travelled above the planetary boundary layer, but the small errors also indicate that the ECMWF fields of the horizontal wind were of exceptionally good quality in the second experiment. This is in sharp contrast to the results of the dispersion models which all failed in the prediction of the perfluorocarbon tracer dispersion for the second experiment. A likely explanation for this is that vertical motions, possibly on small scales, were not correctly captured by the ECMWF analyses, but it is not possible to clarify this with the CVB data.     

Environmental Isotopes for Resolution of Hydrology Problems

The use of environmental isotopes as tracers in the hydrosphere is increasing as analytical instrumentation improves and more applications are discovered. There exists still misconceptions on the role of isotopes in resolving hydrology problems. Naturally occurring isotopes in the environment describe hydrological processes, estimate ages, fingerprint sources and pathways, yet are not subject to the regulatory restraints of artificial isotope injections nor the limited extent of many chemical tracers, particularly dyes and particulates. A short review is presented for practicing hydrologists on the basis for employing stable and radioactive isotopes and a synopsis of recent isotope hydrology applications is provided. Special focus is presented on the emergent role of water isopopes (¹⁸O, ²H, ³H) in wet-weather flow research in urban watersheds. A brief technical approach for an experimental site in the Mill Creek Watershed, Ohio is outlined.     

基于能位测定和示踪检测法的地下煤火漏风状态研究

应用能位测定法和示踪检测技术联合检测了鸡西老二井火区地下漏风状态。通过测试计算相对总压值得出了火区范围内井巷系统与采空区的风流关系,进而定性确定了火区内老二井与胜利井之间存在的可能漏风路径。在此基础上,利用瞬时释放示踪气体法确定了胜利井和老二井间的漏风方向和漏风速度,计算得出了火区下采空区内平均直线漏风风速为0.13m/s,漏风量为776m3/min。研究结果为矿区采取针对性的防灭火措施提供依据,并为同类问题的解决提供参考。     

基于PLIF的混合气温度和浓度测量及其应用

缸内混合气温度和浓度分布,对发动机稳定运行,保障行车安全、避免发生路上人身伤亡或财物损失有重要影响。为了测量发动机缸内混合气的温度和浓度分布,建立了利用单波长激光诱导双示踪剂产生双荧光的测试系统,并拍摄了不同混合气温度、压力和浓度下的荧光图像,获得了不同示踪剂的荧光强度及其比值随温度、压力和浓度的变化关系,并将标定结果用于光学发动机缸内混合气的温度和浓度测量。结果表明,荧光强度及荧光比值均受到环境的压力、温度和混合气浓度的影响。利用PLIF方法得到的片光源穿过的缸内水平截面内的平均温度与用气缸压力计算的同一曲轴转角下的缸内平均温度变化趋势相同,两者之间的差值随着活塞上行而逐步减小。