生产工艺参数对高碳钢线材力学性能的影响

用正交试验的方法研究了不同工艺参数对高碳钢力学性能的影响.分析了82MnA钢线材的生产工艺参数.     

七台河矿区采空塌陷引起的地表变形

以实际观测为依据，以七台河地区地质条件为背景，给出该区塌陷变形，诸如不均匀沉降、地面倾斜、曲率变化、移动等力学量的估算。     

Compression Molding of Phenolic Resin and Corn-based DDGS Blends

With the rapid growth in the ethanol fuel industry in recent years, considerable research is being devoted to optimizing the use of processing coproducts, such as distillers dried grains with solubles (DDGS), in livestock diets. Because these residues contain high fiber levels, they may be amendable to incorporation into bio-based composites. Thus, the goal of this study was to demonstrate the viability of using corn-based DDGS as a biofiller with phenolic resin, in order to produce a novel biomaterial. DDGS was blended with phenolic resin at 0, 10, 25, 50, 75, and 90%, by weight, and then compression molded at 51 MPa (3.7 tons/in²) and 174 °C (345°F). Molded specimens were then tested for tensile strength. Tensile yield strengths ranged from 32 MPa (4,700 psi) to 7.6 MPa (1,100 psi), while the engineering strain ranged from 0.6% to 1.25%. Results indicate that DDGS concentrations between 25% and 50% retained sufficient mechanical strength and thus represent reasonable inclusion values. Additionally, data were similar to those from other studies that have investigated biofillers. Follow-up studies should quantify the effects of altering molding parameters, including molding pressure, temperature, and time, as well as pretreatment of the DDGS. Additionally, strength of the DDGS composites should be optimized through the use of coupling agents or other additives. Mention of a trade name, proprietary product, or specific equipment does not constitute a guarantee or warranty by the United States Department of Agriculture and does not imply approval of a product to the exclusion of others that may be suitable.     

Modification of Soy Protein Plastic with Functional Monomer with Reactive Extrusion

Chemical modification of soy protein with monomers such as maleic anhydride, glycidyl methacrylate and styrene was accomplished using reactive extrusion technology. Thermal and mechanical properties of the modified soy protein plastics were characterized with differential scanning calorimetry (DSC), a dynamic mechanical analyzer (DMA) and a United Testing System load frame. It was found that the denaturation temperature and the glass transition temperature of soy protein plastic changed. In addition, the tensile properties of modified soy protein plastic improved. Attenuated total reflection Fourier transform infrared (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure of modified soy proteins. A suggestion of the interaction between soy protein and functional group in functional polymers is given. Through the in-situ interaction between the polymer and soy protein plastic, the mechanical properties of the soy protein plastic can be adjusted and controlled.     

Engineering practice of mechanical soil aeration for the remediation of volatile organic compound-contaminated sites in China: Advantages and challenges

In recent years, many industrial enterprises located in the urban centers of China have been relocated owing to the rapid increase in urban development. At the sites abandoned by these enterprises, volatile organic compounds have frequently been detected, sometimes at high concentrations, particularly at sites abandoned by chemical manufacturing enterprises. With the redevelopment of sites and changes in land-use type associated with these sites, substantial amounts of contaminated soils now require remediation. Since China is a developing country, soil remediation warrants the usage of techniques that are suitable for addressing the unique challenges faced in this country. Land shortage is a common problem in China; the large numbers of contaminated sites, tight development schedules, and limited financial resources necessitate the development of cost-effective methods for land reclamation. Mechanical soil aeration is a simple, effective, and low-cost soil remediation technique that is particularly suitable for the remediation of large volatile organic compound-contaminated sites. Its effectiveness has been confirmed by conducting laboratory studies, pilot tests, and full-scale projects. This study reviews current engineering practice and developmental trends of mechanical soil aeration and analyzes the advantages and disadvantages of this technology for application in China as an emerging soil remediation market. The findings of this study might aid technology development in China, as well as assist other developing countries in the assessment and implementation of costeffective hazardous waste site soil remediation programs.

Open image in new window

     

核废料深埋处理安全性分析的热-水-力耦合模型新进展

本文介绍了国际合作项目ＤＥＣＯＶＡＬＥＸ在核废料深埋处理安全性分析的热—水—力耦合模型研究方面的新进展。     

Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750

This paper addresses the weldability of 6 mm thick plates of super-duplex stainless steel by electron beam welding (EBW) process. Microstructure investigations conducted using optical and SE microscopy showed the presence of large ferrite grains with intra- and inter-granular austenite. Ferrite content studies on the weld zone estimated that there is no significant element partitioning between austenite and ferrite phases. Hardness studies portrayed that the weld hardness is found to be greater than the parent metal which is acquainted due to the solid solution strengthening effect. Tensile results corroborated that the joints obtained by EB welding process have better strength than the base metal. A detailed structure–property relationships has also been carried out through point and line mapping EDAX analysis across the weldment to substantiate the discussions.     

基于ANSYS Fluent系统的炉排炉垃圾焚烧过程数值模拟

为系统深入地研究机械炉排式垃圾焚烧炉内的焚烧特性,利用ANSYS Fluent软件进行了炉排炉内垃圾焚烧特性的数值模拟,模拟结果与实际运行数据基本一致。在此基础上,对炉排运行速度、进料含水率及助燃风含氧量等关键燃烧特性参数对垃圾焚烧过程的影响规律进行了模拟研究。     

Problems and issues in laser beam welding of aluminum–lithium alloys

Aluminum–lithium (Al–Li) alloys are very attractive for potential aerospace applications due to their lower density, higher specific strength and rigidity, better corrosion and fatigue crack growth resistance properties, compared to conventional aluminum alloys. Laser beam welding (LBW), being an advanced joining method, has already been approved for applications involving aluminum alloys. However, there are still a number of problems and issues to be answered and solved in LBW of Al–Li alloys. In this review, the properties of Al–Li alloys and the characteristics of LBW are introduced, the formation and prevention of the main weld defects such as porosity and hot cracking are discussed, and then the weld microstructure and the joint mechanical properties are described in highlight. At the end, an outlook on future trends is presented.     

机械制造厂综合废水处理工艺

提出了机械制造综合废水污染处理方案。为了减少投资,减少总占地面积和降低运行成本,将涂装废水、机加工切削废液、饭堂的生活污水等混合起来进行集中综合处理。为了确定最佳的处理方案,进行了预处理工艺试验,取得了一系列的试验数据,并将这些结果和生化处理经验,应用于机械制造厂的废水处理,取得良好效果。