Zn-TiO_2纳米管的光催化活性

采用水热合成-浸渍法制备锌掺杂TiO2纳米管（Zn-TiO2纳米管）,透射电镜照片显示Zn-TiO2纳米管为两端开口形貌均一的中空管状结构,管径约6～8 nm,壁厚约1 nm,长度约50～200 nm。研究了Zn-TiO2纳米管对甲基橙的光催化性能,结果表明：掺杂适量锌提高了TiO2纳米管对甲基橙的光催化降解性能,0.4%Zn-TiO2纳米管的光催化性能最佳。同时还探讨了Zn-TiO2纳米管用量和初始pH值等因素对光催化降解甲基橙的影响,结果显示Zn-TiO2纳米管能有效地降解甲基橙。随着光催化反应进行,CODCr去除率和脱色率变化规律不完全相同,可能是由于芳基和烷基降解速率不同所致。     

三维有机LDH的制备及其对有机物的普适性吸附

以表面活性剂十二烷基硫酸钠(SDS)为软模板剂,制得有机三维花状层状双金属氢氧化物(3D-SLDH).采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线能谱仪(EDS)和N₂吸附-脱附等表征手段对3D-SLDH的结构进行表征,确定最佳合成尿素浓度,并通过静态吸附实验考察了3D-SLDH对金橙Ⅱ(AO7)、罗丹明(RhB)以及萘(NAP)的吸附性能.结果表明,室温下,3D-SLDH对AO7、RhB和NAP的吸附容量分别为454.9,46.8和43.7mg/g,表明其对有机物的吸附具有普适性.3D-SLDH对AO7、RhB和NAP吸附过程均符合准二级动力学模型,对AO7和RhB的吸附等温线符合Langmuir模型,而对NAP的等温吸附行为符合partition-adsorption模型.升温有利于3D-SLDH对AO7和RhB的去除,不利于对NAP的去除.此外,结合反应前后固样XRD,FT-IR和XPS分析,可知3D-SLDH对AO7的去除机制主要是层间离子交换作用,对RhB的去除机制主要是疏水及表面吸附作用,而对NAP的去除机制主要为分配作用.     

紫外波长与粒径对纳米TiO_2光催化效果的影响

以甲基橙为光催化降解对象,研究了不同波长紫外灯与不同粒径TiO2组合(365 nm紫外灯+10 nm TiO2,365 nm紫外灯+50 nm TiO2,254 nm紫外灯+10 nm TiO2,254 nm紫外灯+50 nm TiO2)光催化降解甲基橙的效果。结果表明,不同波长紫外灯与不同粒径TiO2组合影响光催化降解甲基橙的效果。其中,254 nm紫外灯+10 nm TiO2组合降解效果最好,其次为254 nm紫外灯+50 nm TiO2组合,再其次为365 nm紫外灯+10 nm TiO2组合,降解效果最差的为365 nm紫外灯+50 nm TiO2组合。由此可见,254 nm紫外灯+10 nm TiO2组合的光催化降解甲基橙的效果最好。     

ZnO包覆Al_2O_3的制备表征及光催化性能研究

采用化学沉积法制备了ZnO包覆Al2O3光催化剂,并通过X射线衍射(XRD)、扫描电镜(SEM)进行了表征。在自制的光化学反应器中,以中压汞灯作光源,一定浓度的甲基橙为光催化反应模型化合物,研究了光催化剂的活性。考察了甲基橙初始浓度、催化剂加投量、pH值、温度、光照强度、反应液体积等因素对脱色率的影响。实验结果表明,ZnO包覆Al2O3复合光催化剂具有较高的光催化活性。在250W中压汞灯下光照3h,0.10g复合光催化剂能使200mL,10mg/L甲基橙溶液的脱色率达到92.21%。     

A field experiment characterizing variable detection rates during plant surveys

Surveys aimed at finding threatened and invasive species can be challenging due to individual rarity and low and variable individual detection rates. Detection rate in plant surveys typically varies due to differences among observers, among the individual plants being surveyed (targets), and across background environments. Interactions among these 3 components may occur but are rarely estimated due to limited replication and control during data collection. We conducted an experiment to investigate sources of variation in detection of 2 Pilosella species that are invasive and sparsely distributed in the Alpine National Park, Australia. These species are superficially similar in appearance to other yellow-flowered plants occurring in this landscape. We controlled the presence and color of flowers on target Pilosella plants and controlled their placement in plots, which were selected for their variation in cover of non-target yellow flowers and dominant vegetation type. Observers mimicked Pilosella surveys in the plots and reported 1 categorical and 4 quantitative indicators of their survey experience level. We applied survival analysis to detection data to model the influence of both controlled and uncontrolled variables on detection rate. Orange- and yellow-flowering Pilosella in grass- and heath-dominated vegetation were detected at a higher rate than nonflowering Pilosella. However, this detection gain diminished as the cover of other co-occurring yellow-flowering species increased. Recent experience with Pilosella surveys improved detection rate. Detection experiments are a direct and accessible means of understanding detection processes and interpreting survey data for threatened and invasive species. Our detection findings have been used for survey planning and can inform progress toward eradication. Interaction of target and background characteristics determined detection rate, which enhanced predictions in the Pilosella eradication program and demonstrated the difficulty of transferring detection findings into untested environments.     

Dawson结构磷钨钒杂多酸的表征及其光催化性能

通过FTIR、UV、循环伏安法对自制的Dawson结构磷钨钒杂多酸催化剂的结构及电化学性能进行表征.以甲基橙溶液模拟工业染料废水,考察了磷钨钒杂多酸光催化降解性能的影响因素.实验结果表明:自制磷钨钒杂多酸具有Dawson结构,表现出良好的电化学性能;在磷钨钒杂多酸加入量为1.5 g/L、初始甲基橙质量浓度为10 mg/L、紫外灯功率为500W的条件下,经紫外光照射200 min,甲基橙降解率可达98.3％.     

Application of a Second-Order Kinetic Model to a Complex Melt Polymerization Reaction

A novel copolymer system has been synthesized using methyl hydroquinone diacetate (MHQDA), 1,4 naphthalene dicarboxylic acid (1,4 NDCA), and polybutylene terephthalate (PBT) using the melt polymerization technique. The optimum kinetic parameters pertinent to this system are reported in this study. A simple second-order reaction sequence summarizes catalyzed and uncatalyzed reactions between MHQDA, 1,4 NDCA, and PBT. The kinetic parameters for the copolymerization reaction were determined using a new second-order model. This technique was used to compute the moles of acetic acid generated in the polymerization process. The model was compared to that of the experimentally determined data. Close comparison (percentage error of less than 5%) was obtained between the experimental and theoretical data. The kinetic data support block copolyester formation. The thermal data also supports formation of block polymers.     

可见光/H2 O2/海藻酸铁非均相催化降解吖啶橙的研究

由海藻酸钠和氯化铁反应制备了海藻酸铁凝胶小球催化剂,考察了该催化剂的吸附和可见光下催化降解吖啶橙的性能.结果表明催化剂的吸附能力随pH升高而提高,且催化剂用量为40个凝胶小球时,可见光下吖啶橙能够在较宽pH值范围内脱色,脱色速率随H2O2的用量增加而增加,该反应符合Arrhenius规律,其表观活化能为49.6 kJ/mol.自由基清除剂的加入不会降低脱色速率,表明催化反应不是羟基自由基的机理,而与高活性的类{ Fe(Ⅳ)=O}高价铁中间产物有关.     

Mn~(2+)-WO_3-TiO_2光催化降解甲基橙的研究

溶胶-凝胶和浸渍相结合的方法制备Mn2+-WO3-TiO2光催化剂,进行甲基橙的光催化降解实验,考察WO3和Mn2+掺入量、焙烧温度及时间对光催化性能的影响。结果表明,500℃焙烧2h,掺杂量n(Mn2+)∶n(WO3)∶n(TiO2)=0.8∶1∶100时,光催化活性最高,光催化降解甲基橙溶液,120min后,降解率达84%,比单纯TiO2的光催化活性提高83%。     

固定化微生物法处理含甲硫醇恶臭气体

采用液相曝气方式驯化培养污水厂活性污泥，获得具有降解甲硫醇能力的优势微生物菌群。同时用海藻酸钠包埋固定化微生物，研究固定化微生物颗粒填充床去除甲硫醇恶臭气体的工艺过程。液相曝气培养研究表明：降解甲硫醇的微生物菌群适宜的ｐＨ值为５．２～９．０，最佳ｐＨ条件为弱碱性。已驯化微生物的离心浓缩回收率为７１．２％，颗粒填充床生物脱臭塔运行实验表明：在空塔停留时间不大于１３ｓ，对低浓度甲硫醇气体（〈１２．９ｍ