From proposal to decision: Suggestions for tightening up the “NEPA process”

Although the process of documenting compliance with NEPA (the National Environmental Policy Act) requires no drastic revisions, it can be managed more rigorously. Suggestions for revision can be grouped under five major steps: 1) getting a complete proposal from the applicant; 2) getting the decision-making process onto the right decision-making path; 3) modifying the applicant's proposal 4) going down a shorter path through the EA/FONSI (environmental assessment and finding of no significant impact) or through categorical exclusion review; and 5) going down the longer path through the EIS. Step 2 is perhaps the most critical, because there a decision must be made whether to write an EA/FONSI or an EIS, on the basis of whether the proposal would “significantly affect … the … environment.” In the past, this decision has not always been made promptly or rigorously. Accordingly, we suggest that the agency responsible for NEPA compliance should develop a system (a “black box”), consisting of a core group of specialists working with an interdisciplinary team, using sophisticated techniques for modeling impacts and directing both their research and their writing according to the concept of significance. By determining more efficiently and reliably whether the impacts of a proposal would be significant, such an approach would improve management of the total process.     

COMBUSTIVE APPROACH FOR MEASURING TOTAL VOLATILE PHOSPHORUS CONTENT IN LANDFILL GAS

A technique was developed to measure the total gaseous phosphorus content in biogas. The amount of air needed for a neutral to oxidising flame was mixed with the biogas. The gas mixture was burnt in a closed quartz burner and the combustion gasses were bubbled through a nitric acid solution. The phosphate content in the bubbling liquid was determined with sector field ICP-MS. The technique was validated in the lab with phosphine. Afterwards the set-up was installed on a landfill. The total gaseous phosphorus content in the landfill gas, measured with the combustive technique, ranged from 1.65 to 4.44 g P/m³. At the same time the phosphine concentration in the landfill gas was determined gas chromatographically (GC). The phosphine (PH₃) content measured with GC ranged from 7.6 to 16.7 g PH₃-P/m³. Since the phosphine-P content (GC) was consistently higher than the total gaseous phosphorus content (burner/ICP-MS), the hypothesised presence of highly toxic gaseous phosphorus compounds other than phosphine could not be demonstrated.     

基于B-P神经网络的环境质量评价方法

提出可将环境质量评价的无论是定量指标还是定性参数转化成"二进制"的"1"或"0",进而将这种二进制数引入B-P网络.通过实例探讨,这种新的B-P网络既适用于定量指标的水质参数又适用于定性指标的水质参数.     

伊犁地区矿泉水资源及水化学特征

在介绍伊犁地区矿泉水资源与形成的水文地质条件的基础上，分析了矿泉水的化学组成及其特征，并给出了水化学类型。     

兰州城区大气粒子态汞的污染状况

通过调查发现在市工业区，粒子态汞浓度高，冬，夏平均值为０．９１和１．００ｎｇ／ｍ＾３，最高达１．９２ｎｇ／ｍ＾３，冬夏季无显著性差异，秋季浓度低，交通频繁区和交通商业混合区冬季平均值０．４５ｎｇ／ｍ＾３，夏季０．４９ｎｇ／ｍ＾３在清洁区大部分在０．１０ｎｇ／ｍ＾３左右，最低０．０７０ｎｇ／ｍ＾３，显示夏季和城区粒子态汞浓度偏高的特征。工业区粒子态汞主要是由人为污染产生的气态汞吸附在同一污染源的粒尘     

无机痕量分析中预富集技术的应用现状及前景

综述了预富集技术在无机痕量分析中的应用，概述了国内外最新进展，介绍了主要技术及方法的特点，大量文献表明预富集技术用于痕量分析取得满意的效果，降低了检测限，提高了灵敏度。     

我国海洋环境污染监测质量保证的回顾与展望

我国海洋环境污染监测质量保证的发展历史可大致分为三个阶段：孕育阶段（１９７２～１９７７年）起步阶段（１９７８～１９８３年）和发展阶段（１９８４～）。各个阶段有不同的特色和侧重点，１９７８年前主要探索与污染物质的分析方法，１９８４年后是监测质量保证工作进入管理时期。     

分光光度法测定染色废水的色度

为消除测定染色废水色度的主观误差，采用分光光度法测定染色废水的色度，与稀释倍数法相比，具有精确，重现性好，适用范围广等特点，ＰＨ值对色度的测定有明显影响，控制ＰＨ值为７．６０，测定色度具有可比性。     

合成洗涤剂对小鼠诱变性研究

连续５天腹腔注射同一剂量（１／５ＬＤ５０）的合成洗涤剂，取小鼠骨髓细胞测定嗜多染色红细胞的微核率，研究表明，３种合成洗涤剂（加大香洗衣粉，洁牌餐具洗涤剂，恩威高级餐具洗洁精）使小鼠微核率有所增高，但恩威，洁牌餐具洗涤剂与对照无显著性差异。