Bioaccumulation characterization of uranium by a novel Streptomyces sporoverrucosus dwc-3

The biosorption mechanisms of uranium on an aerobic bacterial strain Streptomyces sporoverrucosus dwc-3, isolated from a potential disposal site for (ultra-)low uraniferous radioactive waste in Southwest China, were evaluated by using transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), proton induced X-ray emission (PIXE) and enhanced proton backscattering spectrometry (EPBS). Approximately 60% of total uranium at an initial concentration of 10 mg/L uranium nitrate solution could be absorbed on 100 mg S. sporoverrucosus dwc-3 with an adsorption capacity of more than 3.0 mg/g (wet weight) after 12 hr at room temperature at pH 3.0. The dynamic biosorption process of S. sporoverrucosus dwc-3 for uranyl ions was well described by a pseudo second-order model. S. sporoverrucosus dwc-3 could accumulate uranium on cell walls and within the cell, as revealed by SEM and TEM analysis as well as EDX spectra. XPS and FT-IR analysis further suggested that the absorbed uranium was bound to amino, phosphate and carboxyl groups of the cells. Additionally, PIXE and EPBS results confirmed that ion exchange also contributed to the adsorption process of uranium.     

The algal toxicity of silver engineered nanoparticles and detoxification by exopolymeric substances

In this study, we report that silver ions (Ag⁺) from the oxidative dissolution of silver engineered nanoparticles (Ag-ENs) determined the EN toxicity to the marine diatom Thalassiosira weissflogii. Most of the Ag-ENs formed non-toxic aggregates (>0.22 μm) in seawater. When the free Ag⁺ concentration ([Ag⁺]_F) was greatly reduced by diafiltration or thiol complexation, no toxicity was observed, even though the Ag-ENs were better dispersed in the presence of thiols with up to 1.08 × 10⁻⁵ M Ag-ENs found in the <0.22 μm fraction, which are orders of magnitude higher than predicted for the natural aquatic environment. The secretion of polysaccharide-rich algal exopolymeric substances (EPS) significantly increased at increasing [Ag⁺]_F. Both dissolved and particulate polysaccharide concentrations were higher for nutrient-limited cells, coinciding with their higher Ag⁺ tolerance, suggesting that EPS may be involved in Ag⁺ detoxification.     

Measurement of atmospheric nanoparticles: Bridging the gap between gas-phase molecules and larger particles

Atmospheric nanoparticles are crucial components contributing to fine particulate matter(PM2.5), and therefore have significant effects on visibility, climate, and human health. Due to the unique role of atmospheric nanoparticles during the evolution process from gas-phase molecules to larger particles, a number of sophisticated experimental techniques have been developed and employed for online monitoring and characterization of the physical and chemical properties of atmospheric nanoparticles,...     

Chemical composition of different size ultrafine particulate matter measured by nanoparticle chemical ionization mass spectrometer

New particle formation (NPF) is the primary source of nanoparticles and contributes a large number of concentrations of cloud condensation nuclei. In recent years, field campaigns and laboratory experiments have been conducted to promote cognition of the mechanism for NPF and its following growth processes. The chemical composition measurement of nanoparticles could help deepen understanding of the initial step of particulate matter formation. In this work, we developed a nanoparticle chemical ionization mass spectrometer to measure nanoparticles' chemical compositions during their initial growth stage. Meanwhile, a non-radioactive ion source was designed for aerosol charging and chemical ionization. Time of flight mass spectrometer coupled with integrated aerosol size selection and collection module would guarantee the picogram level detection limit and high-resolution ability to measure the matrix of ambient samples. The performance of this equipment was overall evaluated, including the transmission efficiency and collection efficiency of custom-built nano differential mobility analyzer, chemical ionization efficiency, and mass resolution of the mass spectrometer. The high sensitivity measurement of ammonium sulfate and methylammonium sulfate aerosols with diameters ranging from 10 to 25 nm could guarantee the application of this instrument in the ambient measurement.     

Synthesis of nanoparticles by microorganisms and their application in enhancing microbiological reaction rates

Nanotechnology has attracted a great interest in recent years due to its expected impact on many areas such as energy, medicine, electronics, and space industries. This review provides the state-of-art knowledge on the synthesis of nanoparticles by microorganisms including bacteria, fungi, actinomycetes, and yeast, and their effect on microbiological processes. The available microbes and their predicted nanoparticle biosynthesis mechanism, the conditions to control the size/shape and monodispersity of particles, and microbiological reaction rate enhancement using nanoparticles as catalysts are presented. The current limitations and future scope for specific research are also discussed.     

Cellular uptake and mutagenic potential of metal oxide nanoparticles in bacterial cells

Extensive production and consumption of nanomaterials such as ZnO and TiO₂ has increased their release and disposal into the environment. The accumulation of nanoparticles (NPs) in ecosystem is likely to pose threat to non-specific targets such as bacteria. The present study explored the effect of ZnO and TiO₂ NPs in a model bacterium, Salmonella typhimurium. The uptake of ZnO and TiO₂ bare NPs in nano range without agglomeration was observed in S. typhimurium. TEM analysis demonstrated the internalization and uniform distribution of NPs inside the cells. Flow cytometry data also demonstrates that both ZnO and TiO₂ NPs were significantly internalized in the S. typhimurium cells in a concentration dependent manner. A significant increase in uptake was observed in the S. typhimurium treated even with 8 and 80 ng mL⁻¹ of ZnO and TiO₂ NPs with S9 after 60 min, possibly the formation of micelles or protein coat facilitated entry of NPs. These NPs exhibited weak mutagenic potential in S. typhimurium strains TA98, TA1537 and Escherichia coli (WP2uvrA) of Ames test underscoring the possible carcinogenic potential similar to certain mutagenic chemicals. Our study reiterates the need for re-evaluating environmental toxicity of ZnO and TiO₂ NPs presumably considered safe in environment.     

The impact of size on the fate and toxicity of nanoparticulate silver in aquatic systems

The increased use of silver nanomaterials presents a risk to aquatic systems due to the high toxicity of silver. The stability, dissolution rates and toxicity of citrate- and polyvinylpyrrolidone-coated silver nanoparticles (AgNPs) were investigated in synthetic freshwater and natural seawater media, with the effects of natural organic matter investigated in freshwater. When sterically stabilised by the large PVP molecules, AgNPs were more stable than when charge-stabilised using citrate, and were even relatively stable in seawater. In freshwater and seawater, citrate-coated AgNPs (Ag–Cit) had a faster rate of dissolution than PVP-coated AgNPs (Ag–PVP), while micron-sized silver exhibited the slowest dissolution rate. However, similar dissolved silver was measured for both AgNPs after 72 h in freshwater (500–600 μg L⁻¹) and seawater (1300–1500 μg L⁻¹), with higher concentrations in seawater attributed to chloride complexation. When determined on a mass basis, the 72-h IC50 (inhibitory concentration giving 50% reduction in algal growth rate) for Pseudokirchneriella subcapitata and Phaeodactylum tricornutum and the 48-h LC50 for Ceriodaphnia dubia exposure to Ag⁺ (1.1, 400 and 0.11 μg L⁻¹, respectively), Ag–Cit (3.0, 2380 and 0.15 μg L⁻¹, respectively) and Ag–PVP (19.5, 3690 and 2.0 μg L⁻¹, respectively) varied widely, with toxicity in the order Ag⁺ > Ag–Cit > Ag–PVP. Micron-sized silver treatments elicited much lower toxicity than ionic Ag⁺ or AgNP to P. subcapitata. However, when related to the dissolved silver released from the nanoparticles the toxicities were similar to ionic silver treatments. The presence of natural organic matter stabilised the particles and reduced toxicity in freshwater. These results indicate that dissolved silver was responsible for the toxicity and highlight the need to account for matrix components such as chloride and organic matter in natural waters that influence AgNP fate and mitigate toxicity.     

Controlled-release of fluazinam from biodegradable PLGA-based microspheres

Abstract

Pesticides are biological or chemical substances used to manage pests and diseases. Encapsulation of pesticides in biodegradable carriers creates a slow-release system that can improve water dispersibility and prolong residual activity. We prepared two kinds of poly (lactic-co-glycolic acid)(PLGA) nanoparticles (NPs) with polyvinyl alcohol (PVA) and sodium dodecyl sulfate (SDS) surfactants. These were used to encapsulate the fungicide fluazinam (Flu) against Rhizoctonia solani using the Shirasu Porous Glass (SPG) membrane emulsification method. Both nanoparticles had uniform spherical shapes with average diameters of 314.13?nm (SDS) and 612.80?nm (PVA). The slow-release microspheres had excellent sustained-release properties, resistance to UV degradation, storage stability, leaf surface coverage and antifungal efficacy compared to the commercial formulation.     

Aging of TiO2 nanocomposites used in sunscreen. Dispersion and fate of the degradation products in aqueous environment

Aging in water of a TiO₂-based nanocomposite used in sunscreen cosmetics has been studied as a function of light and time. It consisted initially in a TiO₂ core, coated with Al(OH)₃ and polydimethylsiloxane (PDMS) layers. Size measurement, coating alteration, and surface charge were followed by laser diffraction, TEM/EDS, ICP-AES and electrophoretic mobility measurement.The nanocomposite rapidly underwent progressive dispersion in the aqueous phase, enabled by the dissolution of the PDMS layer. A stable suspension of colloidal byproducts from 50 to 700 nm in size was formed. Their positively charged Al(OH)₃ surface was evidenced with an isoelectric point around 7-8, controlling the dispersion stability. The critical coagulation concentrations measured with NaCl and CaCl₂ was 2 × 10⁻² and 8 × 10⁻³ M respectively. The presence of natural organic matter affected the colloidal stability according to the NOM/byproduct ratio. A 2 wt% ratio favored bridging flocculation, whereas a 20 wt% ratio induced sterical stabilization.     

Synergistic effect of N- and F-codoping on the structure and photocatalytic performance of TiO2

Three types of TiO₂ nanostructures were synthesized via a facile hydrolysis method at 195 ℃. Effects of the preparation method and doping with N and F on the crystal structure and photocatalytic performance of TiO₂ were investigated. The nanomaterials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller porosimetry, ultraviolet-visible diffuse reflectance spectroscopy and fluorescent emission spectra. Their photo-catalytic activity was examined by the photodegradation of methylene blue in aqueous solution under both ultra-violet and visible light irradiation. The results show that nitrogen and fluorine co-doped anatase TiO₂ had the characteristics of a smaller crystalline size, broader light absorption spectrum and lower charge recombination than pure TiO₂. Most importantly, more efficient photocatalytic activity under both ultra-violet and visible light was observed. The obtained N-F-TiO₂ nanomaterial shows considerable potential for water treatment under sunlight irradiation.