Prenatally detected double trisomy: Klinefelter and Down syndrome

Double trisomies are a rare occurrence. We report the first case of a Down and Klinefelter's syndrome (48,XXY,+21) in a fetus that was prenatally diagnosed during the 15th week of pregnancy. Even though the nasal bone was present, and the color-Doppler study of the ductus venosus and the nuchal thickness were normal, the maternal serum test results indicated an increased risk of Down syndrome and consequentially a genetic amniocentesis was performed. A 48,XXY,+21 karyotype was observed and the patient decided to terminate the pregnancy. In this case, we did not find the typical ultrasound (US) signs that would have led us to the chromosomopathy; furthermore, we emphasize the advantages of using biochemical screening which, in our case, were crucial in arriving at the correct diagnosis. Copyright © 2006 John Wiley & Sons, Ltd.     

阴离子粘土(LDH)对DNA吸附行为的研究

以4种阴离子粘土做吸附剂,研究了阴离子粘土对DNA的吸附行为.同时,采用XRD、FTIR、UV-vis等表征手段对吸附前后的材料进行研究.吸附结果显示,二元阴离子粘土对DNA的吸附量高于三元阴离子粘土;3:1型阴离子粘土对DNA吸附力强于2:1型阴离子粘土.4种材料对DNA的吸附均符合Langmuir、Freundlich两种吸附等温模型,且Langmuir吸附等温模型拟合度更高,说明阴离子粘土对DNA的吸附为单层吸附.XRD结果显示,吸附前后阴离子粘土基本结构并未发生改变,晶形完好,层间距未有明显变化,表明阴离子粘土对DNA的吸附仅发生在表面,DNA并未进入阴离子粘土层间结构中.UV-vis及电泳结果显示,吸附前后DNA的构型并未发生改变,阴离子粘土的吸附并未对DNA产生较大的影响.     

一株Acinetobacter johnsonii的部分反硝化特性及动力学研究

从实验室A²/O小试设备中分离纯化出一株具有高亚硝酸盐氮（NO₂^--N）积累率的反硝化菌株ZY04,经过16SrDNA鉴定和基因比对后,初步鉴定为Acinetobacter johnsonii.使用Logistic模型可以很理想地拟合菌株ZY04的生长特性曲线,得到生长方程常数a=0.6588,b=24.08,k=0.2413.在维持初始基质中硝酸盐氮（NO₃^--N）浓度为100mg/L的条件下,改变碳源乙酸钠的浓度,使碳氮比（TOC/TN）为3.5,4.5,5.5,6.5,研究菌株ZY04部分反硝化性能,发现该菌株在不同碳氮比条件下均能够保持95%以上的NO₃^--N降解率,在碳氮比为3.5和4.5时,17h后NO₂^--N积累率达到70%以上;在碳氮比为5.5和6.5时,NO₂^--N积累率在更快的11h后达到85%以上,碳氮比为5.5时达到最高NO₂^--N积累率91%.使用Aiba,Edwards和Andrews模型对菌株的基质抑制动力学进行拟合,结果表明,3种模型均可以很好的拟合NO₃^--N和乙酸钠对菌株的单基质抑制动力学,在双基质抑制的9种组合中,有6种模型成功拟合了NO₃^--N和乙酸钠对菌株的双基质抑制动力学,得到了相关半饱和参数和基质抑制参数,相关系数（R²）可以达到98%.     

Efficient adsorption of Mn(Ⅱ) by layered double hydroxides intercalated with diethylenetriaminepentaacetic acid and the mechanistic study

In this study, greatly enhanced Mn(II) adsorption was achieved by as-synthesized diethylenetriaminepentaacetate acid intercalated Mg/Al layered double hydroxides(LDHsDTPA). The adsorption capacity of LDHs-DTPA was 83.5 mg/g, which is much higher than that of LDHs-EDTA(44.4 mg/g), LDHs-Oxalate(21.6 mg/g) and LDHs(28.8 mg/g). The adsorption data of aqueous Mn(II) using LDHs-DTPA could be well described by the pseudosecond order kinetics and Langmuir isotherm model. Thermodynamics study results also showed that the adsorption process of Mn(II) by LDHs-DTPA was exothermic as indicated by the negative ΔH value. Furthermore, based on the structural, morphological and thermostable features, as well as FT-IR and XPS characterizations of LDHs-DTPA and the pristine LDHs, the adsorption mechanism of Mn(II) was proposed. The carboxyl groups of DTPA were proposed to be the main binding sites for Mn(II), and the hydroxyl groups of LDHs also played a minor role in the adsorption process. Among the three common regeneration reagents, 0.1 mol/L Na_2CO_3 was the best for reusing LDHs-DTPA in Mn(II)adsorption. Besides, the Mn(II) adsorption performance could be hindered in the presence of typical inorganic ions, especially cations. Further specific modifications of LDHs-DTPA are suggested to get more selective adsorption of Mn(II) in practical applications.     

Three-dimensional biogenic C-doped Bi2MoO6/In2O3-ZnO Z-scheme heterojunctions derived from a layered precursor

Novel 3D biogenic C-doped Bi_2 MoO_6/In_2O_3-ZnO Z-scheme heterojunctions were synthesized for the first time, using cotton fiber as template. The as-prepared samples showed excellent adsorption and photodegradation performance toward the hazardous antibiotic doxycycline under simulated sunlight irradiation. The morphology, phase composition and in situ carbon doping could be precisely controlled by adjusting processing parameters. The carbon doping in Bi_2 MoO_6/In_2O_3-ZnO was derived from the cotton template, and the carbon content could be varied in the range 0.9–4.4 wt.% via controlling the heat treatment temperature. The sample with Bi_2 MoO_6/In_2O_3-ZnO molar ratio of 1:2 and carbon content of1.1 wt.% exhibited the highest photocatalytic activity toward doxycycline degradation,which was 3.6 and 4.3 times higher than those of pure Bi_2 MoO_6 and Zn In Al-CLDH(calcined layered double hydroxides), respectively. It is believed that the Z-scheme heterojunction with C-doping, the 3D hierarchically micro–meso–macro porous structure, as well as the high adsorption capacity, contributed significantly to the enhanced photocatalytic activity.     

对环境税的一般均衡分析与应用模式探讨

中国的环境污染问题伴随着经济的发展而日趋严重．因此环境问题也成为了我国CGE模型开发者关注的一个焦点。本文利用一个可计算的一般均衡模型模拟了税收改革政策对生产、消费和政府收入所产生的一系列影响。仿真结果说明了对不周行业根据污染的强度不同的税率按产值征税．可以在控制污染行业产量．保护环境的同时．促进整体税制改革，减轻企业的所得税负担和居民的纳税负担。增加政府收入．从数字上说明环境税的“双盈”效应假说是可行的。     

游离羟基及表面活性剂对乙草胺光解的影响

以高压汞灯为光源,以p-亚硝基-N,N-二甲基苯胺(PNDA)作为·OH自由基的探针,研究了H2O2及表面活性剂0206-B(苯乙烯苯酚聚氧乙烯醚和十二烷基苯磺酸钙混剂)对除草剂乙草胺在水中间接光解作用的影响.结果表明,H2O2对水中乙草胺具有光敏化降解作用,其敏化作用效应与·OH有关;而0206-B对乙草胺具有光猝灭降解作用,光猝灭降解作用效应与0206-B减少水溶液中的·OH自由基含量有关.乙草胺直接光解与H2O2作用的乙草胺间接光解相同的产物有Rf(比移值)为0.12、0.52、0.61、0.72的化合物;H2O2敏化降解抑制了乙草胺直接光解产物Rf为0.04、0.10、0.18、0.21、0.79的化合物产生,但促进乙草胺间接光解Rf为0.45、0.66的新光解产物生成.     

九畹溪大桥大跨度钢管拱分段整体吊装施工安全措施探讨

在进行缆索吊装大跨度双肋钢管拱悬拼施工中,过去多采用空中焊接横联作业,该项施工难度大,尤其在桥高、风大、两岸地形陡峭、施工条件困难的情况下,施工安全和施工质量难以保证。是否能将空中焊接作业转化成地面作业,本文详细介绍缆索吊装大跨度双肋钢管拱进行悬拼施工新技术,并结合九畹溪大桥施工实例,探讨缆索吊装双肋悬拼钢管拱施工中工艺程序、质量控制、安全措施等工程施工新方法及施工效果。     

Effect of two-stage sodium hydroxide pretreatment on the composition and structure of Napier grass (Pakchong 1) (Pennisetum purpureum)

ABSTRACT

Sodium hydroxide is ideal in removing lignin from lignocellulosic materials at an effective operational cost. Two-stage NaOH pretreatment was employed herein to investigate lignin and hemicellulose removal and understand the morphology of Napier grass (Pakchong 1) (Pennisetum purpureum), which is considered lignocellulosic due to its high carbohydrate content. NaOH was used at different concentrations (0, 1, 2, 3, and 4 wt.%) and presoak times (1, 2, 3, and 4 h). The results demonstrated that 3 wt.% NaOH at 121°C without presoak resulted in 83.5% lignin removal, with a cellulose to lignin ratio of 3.0. Moreover, the treated samples showed cracking and irregular patterns at optimal conditions.