Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

INTEGRATING SERVICE‐LEARNING INTO WATERSHED MANAGEMENT PROGRAMS: OPPORTUNITIES AND CHALLENGES1

ABSTRACT: The objective of this article is to open a dialogue on integrating service‐learning into community based watershed management programs and to discuss opportunities and challenges that a service‐learning program presents to universities and communities. The article presents the concept and definition of service‐learning, and arguments concerning why institutions of higher education and university faculty and students should be involved with community based watershed management programs. The article describes a case study for developing a service‐learning program for watershed management at Virginia Tech and discusses lessons learned from the case study. The paper concluded that to make a service‐learning program sustainable, there should be a long term plan, regular and effective communication with the stakeholders, and some incentives for faculty and students for long term commitment to the community based watershed management programs.     

COLD WATER PATCHES IN WARM STREAMS: PHYSICOCHEMICAL CHARACTERISTICS AND THE INFLUENCE OF SHADING1

ABSTRACT: Discrete cold water patches within the surface waters of summer warm streams afford potential thermal refuge for cold water fishes during periods of heat stress. This analysis focused on reach scale heterogeneity in water temperatures as influenced by local influx of cooler subsurface waters. Using field thermal probes and recording thermistors, we identified and characterized cold water patches (at least 3°C colder than ambient streamflow temperatures) potentially serving as thermal refugia for cold water fishes. Among 37 study sites within alluvial valleys of the Grande Ronde basin in northeastern Oregon, we identified cold water patches associated with side channels, alcoves, lateral seeps, and floodplain spring brooks. These types differed with regard to within floodplain position, area, spatial thermal range, substrate, and availability of cover for fish. Experimental shading cooled daily maximum temperatures of surface waters within cold water patches 2 to 4°C, indicating a strong influence of riparian vegetation on the expression of cold water patch thermal characteristics. Strong vertical temperature gradients associated with heating of surface layers of cold water patches exposed to solar radiation, superimposed upon vertical gradients in dissolved oxygen, can partially restrict suitable refuge volumes for stream salmonids within cold water patches.     

IMPLICATIONS OF C.A.R.E. VS. SOUTHVIEW FARM ON THE U.S. LIVESTOCK AND POULTRY INDUSTRY1

ABSTRACT: On May 19, 1993, a jury in the U.S. District Court for the Western District of New York found Southview Farm and Richard H. Popp guilty of violating the Clean Water Act on five occasions. The violations were the result of storm water runoff from a site used for disposal of dairy cattle manure from an unpermitted concentrated animal feeding operation. The presiding District Court judge later dismissed the jury verdict, and subsequently a U.S. Court of Appeals for the Second Circuit reversed the dismissal. The Court of Appeals concluded that the discharges were not exempt as agricultural storm water discharges, and that the manure spreaders involved were point sources. Because the use of animal manures in crop production activities will result, unavoidably, in the discharge of some pollutants to adjacent surface waters, a rational and universally applicable basis is needed to determine when such discharges are point versus nonpoint source. Current statutes and regulations do not delineate clearly such a boundary. To address this lack of specificity, I propose that application rates be based on recommended crop nutrient needs.     

TEMPORAL AND GEOMORPHIC VARIATIONS OF STREAM STABILITY AND MORPHOLOGY: MAHOGANY CREEK,NEVADA1

ABSTRACT: Detailed studies of long-term management impacts on rangeland streams are few because of the cost of obtaining detailed data replicated in time. This study uses government agency aquatic habitat, stream morphologic, and ocular stability data to assess land management impacts over four years on three stream reaches of an important rangeland watershed in northwestern Nevada. Aquatic habitat improved as riparian vegetation reestablished itself with decreased and better controlled livestock grazing. However, sediment from livestock disturbances and road crossings and very low stream flows limited the rate of change. Stream type limited the change of pool variables and width/depth ratio, which are linked to gradient and entrenchment. Coarse woody debris removal due to previous management limited pool recovery. Various critical-element ocular stability estimates represented changes with time and differences among reaches very well. Ocular stability variables tracked the quantitative habitat and morphologic variables well enough to recommend that ocular surveys be used to monitor changes with time between more intensive aquatic surveys.     

INTEGRATED RIVER BASIN OPTIMIZATION: MODELING ECONOMIC AND HYDROLOGIC INTERDEPENDENCE1

ABSTRACT: This paper presents an integrated optimal control model that optimizes economic performance of reservoir management in watersheds in which there are significant economic and hydrologic interdependencies. The model is solved using the General Algebraic Modeling System (GAMS). Results show that application of this model to New Mexico's Rio Chama basin can increase total system benefits over historical benefits by exploiting complementarities between hydroelectricity production, instream recreation, and downstream lake recreation.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.