气浮装置在化工废水中的应用

针对某化工集团废水处理及回用工程采用气浮装置预处理化工废水,研究主要对气浮装置的原理、设计参数、药剂投加等进行实践与探讨。运行结果表明,在稳定运行阶段,可实现进水量2083 m3/h。进水CODcr平均浓度为600 mg/L,SS浓度为220 mg/L,石油类平均浓度为50 mg/L,处理出水CODcr≤490mg/L、SS≤46.2mg/L、石油类≤1mg/L。该工艺处理效果稳定,对悬浮物和石油类处理效果显著。     

Insight into the safety distance of ground and underground installations in typical petrochemical plants

Petrochemical plants are continuously turning into large-size corporations, the installations of facilities show a developing trend from ground to underground because of the difference in land using rate. In this regard, the safety distance of petrochemical equipment buried in both ground and underground cases were investigated based on risk assessment. As a case study, gasoline tank and LPG tank set on the ground and underground are singled out to compare the risks involved. The research showed that the setting case of installation had a great influence on safety distance. Two cases have 80% reduction of equivalent safety distance compared with the rest of the cases. It was found that when the gasoline storage tank was placed underground alone, the PLL value decreased by 36.7%. Only LPG tank was placed underground, and the PLL decreased by 6.33%, and the gasoline and LPG storage tanks were placed underground simultaneously, the PLL value declined by 42.3%. Thus, the layout of plants could be further optimized, which can greatly improve the performances of land use efficiency and safety. In addition, this paper, the selection of embedding methods and the sensitivity of underground case to overpressure was resumed from two aspects: soil properties and burial depth. For the soil properties, it was found that the water saturated sandy soil with high air content and the low density unsaturated sandy soil had better effects on weakening overpressure. Such properties are particularly beneficial to reducing the occurrence rate of accidents. In terms of burial depth, it can be observed that as the burial depth was changed from 0.5m to 1.1m, the value of overpressure has dropped dramatically. When the burial depth was 2m, the damage to personnel and buildings has been greatly reduced beyond 2m from the explosion center.     

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.     

Modeling and optimizing efficiency gap between managers and operators in integrated resilient systems: The case of a petrochemical plant

The reliability issue in complex industrial systems such as oil, gas, petrochemical companies, nuclear and aviation industries has been of great importance. Resilience engineering (RE) is a new attitude toward the improvement of safety and reliability in the stated systems. One of the challenges a resilient system might face is the gap between work as imagined by managers and work as actually done by operators. This study will introduce a new framework named integrated resilience engineering (IRE) as a result of developing the concept of RE. The data used in this research have been obtained by means of questionnaire from a petrochemical company. Thereafter, the efficiency of operators and managers are calculated in RE and IRE frameworks through data envelopment analysis (DEA) approach. Then, the gaps between managers and operators are analyzed in two frameworks. The results are indicative of a significant growth in the number of efficient operators and managers in IRE framework compared to RE framework. Besides, the efficiency mean of managers and operators in IRE framework has experienced the growth of 1.8% and 5% compared to RE framework, respectively. The efficiency gap between managers and operators in IRE framework has also enjoyed the improvement of 88% compared to RE framework. Generally, it can be said that the suggested items of this research has led to the betterment of managers and operators’ efficiency and of the efficiency gap between them. Therefore, these items can improve the resilience and safety of complex systems. The results of Spearman test show that there is a strong direct correlation between the DEA results in two frameworks. This is the first study that examines the efficiency gap between operators and managers based on the RE principles and by means of DEA approach.     

我国石化企业建立环境管理体系的意义及建议

介绍了ＩＳＯ１４０００环境管理体系的内容。通过分析我国石化企业的现状和建立ＩＳＯ１４０００环境管理体系的意义，提出了建立ＩＳＯ１４０００环境管理体系是提高企业管理水平的有效途径的观点。最后，探讨了现阶段石化企业建立ＩＳＯ１４０００环境管理体系的步骤。     

利用"双膜法"对石化污水进行深度处理

介绍“双膜法”工艺的流程及运行情况，并对影响装置稳定运行的因素进行分析，提出建议。     

原子吸收光谱在石化领域的应用

简述了近十几年来原子吸收光谱在我国石油化学工业领域的应用及进展，全文分原油及其加工产品，化工物品，催化剂添加剂等几类样品阐述。     

湿式氧化处理剩余污泥反应动力学研究

针对剩余污泥湿式氧化处理过程。以污泥中挥发分的去除为目标污染物，进行了化工废水剩余污泥．炼油废水剩余污泥湿式氧化过程动力学研究，并对湿式氧化两阶段一级动力学模型和广义动力学模型的动力学进行求解。两阶段一级动力学模型说明化工污泥．炼油污泥湿式氧化过程均属于快速反应期接慢速反应期。但不同污泥其活化能和指前因子相差较大：而用广义动力学模型可以建立通用的剩余污泥湿式氧化反应速率方程，该模型应用于城市废水剩余污泥湿式氧化过程，计算值与试验值有很好的相关性（P^2≥0．98）。     

国内石油化工行业节水减排综评

分析当前国内石油化工行业新鲜水消耗和废水排放的现状，强调加快污水回用进程、提高水资源综合利用水平的必要性和紧迫性。介绍国内外石油化工行业节水理论，并在分析国内石油化工行业实施节水减排存在困难的基础上，提出节水减排的具体措施。     

福建某石化企业废气排放及土壤污染现状调查及研究

石化工业园区造成的累积环境影响随着其蓬勃发展而逐步显现,其污染物质在周边土壤与河流底质中的积累影响较为显著[1],目前,我国已有不少关于化工园区环境污染的研究,多集中在水和空气污染问题的研究[2-5],较少针对石油化工园区土壤累积影响的研究[6-7]。本文以我省某石化园区为调查对象,通过该园区废气污染物排放监测及土壤环境现状调查,了解我省新型石化工业园区环境污染状况,对提高石化行业土壤污染防控有重要指导意义。