污泥停留时间对污泥减量化的影响

污泥停留时间不但决定系统剩余污泥的排放量,还直接影响到污泥的絮凝沉降性能及活性等。由实验可知:污泥停留时间延长,可导致微生物缺乏营养,减少污泥产生量;从而导致SVI升高,污泥负荷降低。因此,延长污泥停留时间减少剩余污泥量,可以节省尿素和KH2PO4投入量,从经济上节省运行成本。     

Research on the recycling industry development model for typical exterior plastic components of end-of-life passenger vehicle based on the SWOT method

In-depth studies on the recycling of typical automotive exterior plastic parts are significant and beneficial for environmental protection, energy conservation, and sustainable development of China. In the current study, several methods were used to analyze the recycling industry model for typical exterior parts of passenger vehicles in China. The strengths, weaknesses, opportunities, and challenges of the current recycling industry for typical exterior parts of passenger vehicles were analyzed comprehensively based on the SWOT method. The internal factor evaluation matrix and external factor evaluation matrix were used to evaluate the internal and external factors of the recycling industry. The recycling industry was found to respond well to all the factors and it was found to face good developing opportunities. Then, the cross-link strategies analysis for the typical exterior parts of the passenger car industry of China was conducted based on the SWOT analysis strategies and established SWOT matrix. Finally, based on the aforementioned research, the recycling industry model led by automobile manufacturers was promoted.     

Seismic risk assessment of liquid overtopping in a steel storage tank equipped with a single deck floating roof

Major earthquakes have demonstrated that Natech events can be triggered by liquid overtopping in liquid storage tanks equipped with floating roofs. Thus, research on the dynamic behaviour of steel storage tanks with floating roofs is still required. In this paper, the seismic risk against liquid overtopping in a real steel storage tank with a floating roof was analysed using a simplified model that was validated by a refined finite element model based on the arbitrary Lagrangian-Eulerian approach. The simplified model utilizes the Lagrangian of a floating roof-fluid system and is capable of providing a response history of the floating roof. It was demonstrated that it could predict the maximum vertical displacement very accurately, while some differences were observed in the response history of vertical displacement. The computational time for a single response history analysis based on the simplified model amounted to a few minutes, which is significantly less demanding compared to hours required for response history analysis in the case of the refined FE model. The simplified model is thus appropriate for the seismic fragility analysis considering the overtopping limit state. It is shown that the fragility curves are significantly affected by the liquid filling level. The risk for liquid overtopping is quite high in the case of a full tank. However, by considering the variation of filling level during the year, the overtopping risk was observed reduced by approximately 30%. Alternatively, the approximate fragility analysis for the liquid overtopping can be performed by utilizing the Eurocode formula for the vertical displacement of liquid. This approach is straightforward, but the formula does not account for the higher mode effects, which may result in overestimated seismic intensity causing overtopping, as discussed in the paper.     

Establishment of Aqueous Film Forming Foam extinguishing agent minimum supply intensity model based on experimental method

In recent years, serious fire and explosion accident in petrochemical storage tanks have taken place frequently. Therefore, increasing the firefighting force in petrochemical parks is particularly important. The ambition of the paper is mainly studying the supply intensity of Aqueous Film Forming Foam (AFFF) extinguishing agent. Fire extinguishing agent demand calculation method that can be capable of matching fire scale is established by carrying out series of fire extinguishing experiments. 6% AFFF is chosen to carry out three groups of experiments respectively: fire extinguishing agent fluidity determination, series groups of small size simulation oil pool fire and 177 square meters of large oil pool fire extinguishing experiment. The situation of fire extinguishing on fuel surface of AFFF can be explored through experimental means under cold and hot conditions. The data obtained from experiments prove a higher conformity between covering process and covering model under the cold condition. The model can predict the cold coverage of AFFF effectively. After unifying the supply flow from each experiment, the statistics can be fitted and come to the minimum supply intensity algorithm of AFFF against the target storage tank specifications. The algorithm is used to estimate the minimum supply intensity when extinguishing full liquid surface fire. This model also can be used as reference for petrochemical fire protection.     

Water resource conservation promotes synergy between economy and environment in China’s northern drylands

•Considering evenness provides a more accurate assessment of sustainable development. •Water resource conservation drives industrial transformation. •Synergy between economic development and environmental protection is achieved. •Regional collaboration over water could promote sustainable development in drylands. Water resource availability is the major limiting factor for sustainable development in drylands. Climate change intensifies the conflicting water demands between people and the environment and highlights the importance of effective water resource management for achieving a balance between economic development and environmental protection. In 2008, Inner Mongolia, typical dryland in northern China, proposed strict regulations on water exploitation and utilization aimed at achieving sustainable development. Our study is the first to investigate the effectiveness and performance of these long-standing water conservation regulations. Our analyses found that the regulations drove industrial transformation, evidenced by the decreasing proportion of environmentally harmful industries such as coal and steel, and the increasing proportion of tertiary industries (especially tourism). Following industrial transformation, economic development decoupled from industrial water consumption and subsequently led to reduced negative environmental impacts. Based on these results, adaptive strategies were developed for 12 cities by revealing and integrating their development pathways and relative status in achieving sustainable development. Integration and cooperation between cities were proposed, e.g., a water trade agreement between eastern Inner Mongolia (an economically underdeveloped region with relatively abundant water resources) and central Inner Mongolia (an economically developed region with high water stress). Such an agreement may enable the holistic achievement of sustainable development across regions. By integrating the findings of our research, our study presents a reproducible framework for water-management-based sustainable development strategies in drylands.     

Joint management of energy and environment

According to the Kyoto Protocol, by 2012 Norwegian emissions of greenhouse gases must be reduced by about six per cent lower than the 1996 level. In order to achieve this target, the Norwegian Government intends to give greater priority to energy efficiency measures, renewable energy sources and the use of heat pumps.Even though Energy Management should be integrated in EMS, empirical data indicates that it is not. Energy Management is separated from EMS in Norwegian industry. Focusing on the quality of the energy consumed, facilitates the utilization of wasted, low temperature energy sources. However, empirical data indicate that energy intensive food companies do not emphasize the portion of renewable energy sources they consume, or the quality of their energy consumption. This paper discusses integration of Energy Management into EMS. Better integration of existing energy and environmental schemes represents a CO₂ reduction potential that may be realised at short-term, net cost savings. This paper argues for the joint management of energy with the environment.     

The use of state workers' compensation administrative data to identify injury scenarios and quantify costs of work-related traumatic brain injuries

PROBLEM: Traumatic brain injury (TBI) is a public health problem but little is known about the nature of that problem in the working population. METHOD: The author used a national definition to identify cases in Washington State from workers' compensation (WC) hospital billing data, quantified the cost of WC insurance benefits using actuarial cost estimates, and identified high risk industries using ANSI Z16.2 typology. RESULTS: There were 928 cases of TBI with a lifetime claim cost of $159 million from the Washington State Fund (1994-2001). Sixty percent of injuries resulted in death or disability. The highest risks of TBI are concentrated in 16 industrial insurance risk classes and the highest costs in 19 North American Industry Classification codes. Injury scenarios were identified for nine industrial insurance risk classes. CONCLUSIONS: TBI is a disabling and costly workplace injury in the state of Washington, affecting even teenagers and seniors who are not generally considered to be part of the workforce. Injury typology codes provide useful information for improving workplace safety. IMPACT ON INDUSTRY: This research provides industry with quantitative information regarding the cost of work-related traumatic brain injury and the usefulness of using workers' compensation claims data to reduce the burden of workplace injury.     

A Decision-Aid Framework to Provide Guidance for the Enhanced Use of Best Available Techniques in Industry

Best Available Techniques (BATs) contribute significantly to the reduction of industrial environmental burdens with respect to air pollution, wastewater, and solid wastes. In Europe, the application of BATs is prescribed by Directive 96/61/EC, which, however, leaves the selection of specific BATs to plant operators. In making their choices, installations have to consider not only the environmental benefits of BATs, but also all relevant cost components. In assessing the economic attractiveness of potential BATs and their combinations, as well as incentives and disincentives to be instituted, the cost of environmental externalities, usually not reflected in market prices, should be taken into account. In this paper, a decision-aid framework combining an assessment of environmental externalities and the utilization of multicriteria methods and, more specifically, Multiobjective Mathematical Programming, capable of addressing all these issues in a comprehensive and coherent manner, is presented. This is illustrated by its application for the region of Attica in Greece, where over 50% of the industrial basis and Athens, with its 4 million inhabitants, are located. The implementation of the framework and its associated tools to 800 installations led to the identification of the specific BATs, alone or in combination, that provide the most cost-effective reductions of four air pollutants (PM10, SO₂, NO_x, VOC) and CO₂. The results also clearly demonstrate the increased pollution reductions that would result from the adoption of BATs made economically attractive by the inclusion of externalities. Estimates of investments and net present values with and without incentives/disincentives are also provided.     

Initiatives and outcomes of green supply chain management implementation by Chinese manufacturers

This paper aims to explore the green supply chain management (GSCM) initiatives (implementation) of various manufacturing industrial sectors in China and examine the links between GSCM initiatives and performance outcomes. We conducted a survey to collect data from four typical manufacturing industrial sectors in China, namely, power generating, chemical/petroleum, electrical/electronic and automobile, and received 171 valid organizational responses for data analysis. Analysis of variance (ANOVA) was used to analyze the data. The results are consistent with our prediction that the different manufacturing industry types display different levels of GSCM implementation and outcomes. We specifically found that the electrical/electronic industry has relatively higher levels of GSCM implementation and achieves better performance outcomes than the other three manufacturer types. Implications of the results are discussed and suggestions for further research on the implementation of GSCM are offered.     

基于投资结构视角的企业环保投资与财务绩效

通过回归分析法研究造纸与印刷业上市公司的环保投资与财务绩效的相关性,发现两者之间呈显著的正向线性关系。将环保投资按不同结构分类,发现污染预防投资比末端治理投资带来的财务绩效更明显,环保固定资产投资比技术投资在短期内带来的财务效益更明显。