Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell

Waste incineration fly ash was successfully recycled to calcium phosphate hydrogel, a type of fast proton conductor. The crystallized hydrogel from incineration fly ash had a lower electric conductivity and a lower crystallinity than that from calcium carbonate reagent. However, the difference in electric conductivity between these crystallized hydrogels decreases with temperature. This was due to the presence of potassium in the incineration fly ash. The fuel cell with a membrane electrode assembly (MEA) using the calcium phosphate hydrogel membrane prepared from incineration fly ash was observed to generate electricity. The performance of this fuel cell was almost equal to that of a mixture of K₂CO₃ and CaCO₃ reagents; further, the performance of the former was superior to the fuel cell with a perfluorosulfonic polymer membrane at temperatures greater than approximately 85 °C.     

Scaling of spontaneous imbibition data with wettability included

Wettability is a dominant parameter governing spontaneous imbibition. However less attention has been paid to the effect of wettability on the scaling of spontaneous imbibition data. Actually few models can include wettability in scaling of spontaneous imbibition data. To this end, a scaling model has been developed for NAPL (oil)-saturated porous media with different wettability based on the fluid flow mechanisms in porous media. Relative permeability, capillary pressure, initial water saturation, and wettability are considered in the scaling model. Theoretically this scaling model is suitable for both cocurrent and countercurrent spontaneous imbibition. The experimental data of countercurrent spontaneous water imbibition at different wettability cannot be scaled using the frequently used scaling model but can be scaled satisfactorily using the scaling model developed in this study. An analytical solution to the relationship between recovery and imbibition time for linear spontaneous imbibition has also been derived in the case in which gravity is ignored. The analytical solution predicts a linear correlation between the recovery by spontaneous water imbibition and the square root of imbibition time, which has been verified against experimental data.     

Multiphase flow and transport through fractured heterogeneous porous media

The migration of Dense, Non-Aqueous Phase Liquid (DNAPL) and dissolved phase contamination through a fractured heterogeneous porous medium has been investigated through the use of a multiphase compositional model. The sensitivity of the timescales of migration and the distribution of contaminant in the subsurface to the mean permeability, the variance of the permeability, and the degree of fracturing of the domain were examined. It was found that increasing the mean permeability of the domain allowed the DNAPL to penetrate deeper into the subsurface, while decreasing the mean permeability caused the DNAPL to pool at shallower depths. The presence of fractures within the system was found to control the infiltration only in the most fractured domain. Moment analysis of the nonwetting phase showed that large-scale movement had ceased after approximately 9 years (maximum duration of the source-on condition was approximately 4.5 years). This tended to be due to a redistribution of the DNAPL towards a residual configuration, as was evidenced by the gradual trending of average nonwetting phase saturations within the domain to a static value. The dissolved phase plume was found to migrate at essentially the same rate as the nonwetting phase, due to the reduced relative permeability of lenses containing DNAPL, and due to diffusive losses of mass to the matrix of fractured clay and silty-clay lenses. Some exceptions to this were found when the DNAPL could not overcome the displacement pressure of a lens, and could not by-pass the lens due to the lack of available driving force after the source had been shut off.     

Preparation conditions and swelling equilibria of biodegradable hydrogels prepared from microbial poly(γ-glutamic acid) and poly(ε-lysine)

Biodegradable hydrogels prepared by -irradiation from microbial poly(amino acid)s are reviewed. pH-sensitive hydrogels were prepared by means of -irradiation of poly(-glutamic acid) (PGA) produced byBacillus subtilis IFO3335 and poly(-lysine) (PL) produced byStreptomyces albulus in aqueous solutions. The preparation conditions, swelling equilibria, hydrolytic degradation, and enzymatic degradation of these hydrogels were studied. A hydrogel with a wide variety of swelling behaviors has been produced by -irradiation from a mixture solution of PGA and PL.Paper presented at the 4th International Workshop on Biodegradable Plastics and Polymers, October 11–14, 1995, Durham, New Hampshire, USA.     

负载型TiO2固定相光催化降解水中偏二甲肼

以多孔硅胶为载体，采用简单工艺制得的负载型化剂ＴｉＯ２，经实验证明，具有催化活性良好，性能稳定，不易脱落，可重复使用等优点，在紫外光条件下降解水中偏二甲肼，光照２h降解率达到６５％，通入空气，加入Ｃｕ＾２＋Ｈ２Ｏ２等都有利于偏二甲肼的降解，光照２h的降解率分别提高到７０％。９０％和９５％。     

光驱动水凝胶用于非常规水源处理的研究进展

近年来淡水资源短缺问题日趋严重,使用非常规水源作为淡水资源的补充受到了广泛关注.海水和大气水是非常规水源中很重要的组成部分,最近十年水凝胶逐渐被应用到处理这些水源的技术之中,如光热蒸馏、正渗透、水富集.由于水凝胶与水分之间独特的相互作用,使得水凝胶与之前所研究的水处理材料相比在吸水性能和脱水性能方面都具有极大的优势.此外,其在自然光照条件下就可以实现水处理工艺的运行,从而使得水处理过程更加低碳环保.本文首先介绍了海水淡化和大气集水方法的发展历程,之后分别介绍了水凝胶应用于海水淡化和大气集水方面近几年来的研究进展,从评价指标、处理原理、影响因素、净化能力等方面对各种处理工艺进行总结,最后提出了光驱动水凝胶用于非常规水源处理方法的研究前景.     

Bimetallic nickel molybdate supported Pt catalyst for efficient removal of formaldehyde at low temperature

Efficient removal of formaldehyde from indoor environments is of significance for human health.In this work,a typical binary transition metal oxide that could provide various oxidation states,β-NiMoO_4,was employed as a support to immobilize the active Pt component(Pt/NiMoO_4) for catalytic formaldehyde elimination at low ambient temperature(15℃).The results showed that the hydrothermal preparation temperature and time had a noticeable impact on the morphology and catalytic activity of the samples.The catalyst prepared with hydrothermal temperature of 150℃ for 4 hr(Pt-150-4) exhibited superior catalytic activity and stability mainly due to its distinctly porous structure,relative abundance of adsorbed surface hydroxyls/water,and high oxidation ability,which resulted from the interaction of Pt with Ni and Mo of the bimetallic NiMoO_4 support.Our results might shed light on the rational design of multifunctional catalysts for removal of indoor air pollutants at low ambient temperature.     

Brilliant red X-3B uptake by a novel polycyclodextrin-modified magnetic cationic hydrogel: Performance, kinetics and mechanism

A novel polycyclodextrin-modified magnetic cationic hydrogel (PCD-MCH) was developed and its performance, kinetics and mechanism for the removal of reactive brilliant red X-3B (X-3B) were studied. The results showed that the zeta-potential of PCD-MCH was 32.8 to 16.7 mV at pH 3.0–10.5. The maximum X-3B adsorption capacity of PCD-MCH was 2792.3 mg/g. The adsorption kinetics could be well-described by the Weber–Morris model and the homogeneous surface diffusion model (HSDM). Diffusion stages corresponding to surface or film diffusion, intra-particle or wide mesopore diffusion, and narrow mesopore/micropore diffusion occurred at 0–120, 120–480 and 480–1200 min, respectively. The latter two diffusion stages were rate-controlling for X-3B adsorption kinetics. At the initial X-3B concentration of 600 mg/L, the diffusion coefficient (D_s) and external mass transfer coefficient in the liquid phase (k_F) were 3 × 10^?11 cm²/min and 4.68 × 10^?6 cm/min, respectively. X-3B approaching the center of PCD-MCH particles could be observed at 360 min. At the end of the third diffusion stage, the C_p at q/q_e = 0 was 45.20 mg/L, which was close to the homogeneous C_p value of 46 mg/L along the radius of PCD-MCH particles. At pH 3.0–10.0, PCD-MCH showed stable X-3B adsorption capacities. After five regeneration-reuse cycles, the residual adsorption capacity of regenerated PCD-MCH was higher than 892.7 mg/g. The corresponding adsorption mechanism was identified as involving electrostatic interactions, cyclodextrin cavities and hydrogen bonds, of which cyclodextrin cavities showed prominent capture performance towards dye molecules through the formation of inclusion complexes.     

Catalytic activity of porous manganese oxides for benzene oxidation improved via citric acid solution combustion synthesis

Various manganese oxides (MnO_x) prepared via citric acid solution combustion synthesis were applied for catalytic oxidation of benzene. The results showed the ratios of citric acid/manganese nitrate in synthesizing process positively affected the physicochemical properties of MnO_x, e.g., BET (Brunauer-Emmett-Teller) surface area, porous structure, reducibility and so on, which were in close relationship with their catalytic performance. Of all the catalysts, the sample prepared at a citric acid/manganese nitrate ratio of 2:1 (C2M1) displayed the best catalytic activity with T₉₀ (the temperature when 90% of benzene was catalytically oxidized) of 212℃. Further investigation showed that C2M1 was Mn₂O₃ with abundant nano-pores, the largest surface area and the proper ratio of surface Mn⁴⁺/Mn³⁺, resulting in preferable low-temperature reducibility and abundant surface active adsorbed oxygen species. The analysis results of the in-situ Fourier transform infrared spectroscopy (in-situ FTIR) revealed that the benzene was successively oxidized to phenolate, o-benzoquinone, small molecules (such as maleates, acetates, and vinyl), and finally transformed to CO₂ and H₂O.     

海藻酸锆/聚N-异丙基丙烯酰胺半互穿网络凝胶球的除磷性能

利用离子交联和自由基聚合反应制备了一种海藻酸锆/聚(N-异丙基丙烯酰胺)半互穿网络凝胶球(ZA/PNIPAM),用于吸附水中的磷酸盐.考察了溶液初始pH、吸附剂投加量、初始磷酸盐浓度和共存阴离子等因素对凝胶球吸附性能的影响.结果表明:ZA/PNIPAM在pH=2时可获得较大的吸附能力;随着投加量的减少、初始磷酸盐浓度的升高,凝胶球的吸附性能逐渐增大;SO_4~(2-)对吸附性能影响较Cl~-和NO_3~-明显.准二级动力学模型和颗粒内部扩散模型可以较好地拟合动力学吸附数据,表明表面吸附和颗粒内部扩散是吸附速率的主要控制步骤.吸附等温线数据可以较好地被Freundlich模型描述,表明吸附过程为非均匀多分子层吸附.FTIR、XPS、零电荷点(pH_(pzc))的结果以及相关吸附数据揭示凝胶球吸附磷酸盐的机制为静电吸附(物理吸附)以及配位交换(化学吸附)的共同作用.经过4次循环再生后,ZA/PNIPAM吸附性能保持稳定,具有良好的重复使用性.