Development of chemically produced hydrogen energy-based impact bonding process for dissimilar metals

There has been a growing demand in the fabrication of dissimilar metal parts for application in the automotive, aerospace, defense, chemical and nuclear industries. Welding of dissimilar materials can be accomplished via impact welding, which can minimize the formation of a continuous inter-metallic phase, while chemically bonding dissimilar metals. This paper discusses an innovative technique for bonding dissimilar metals by chemically produced hydrogen energy by reacting aluminum powder and water. Experiments were carried out to study impact bond characteristics using copper and stainless steel cylindrical billets. The influence of nosed flyer billet angle and billet mass on bonding characteristics were studied. The test results have demonstrated that the nosed flyer billet angle has significant influence on wavy bond patterns at the interface. Among the three flyer billet nose angles of 9°, 12° and 15°, the billets with a flyer angle of 15° resulted in a complete wave morphological pattern along the whole sample cross-section. This study shows the potential of developing a cost effective system/machinery where discrete metal parts can be bonded at near net shape.     

节能降耗技术在污水处理中的应用

通过对污水泵进行变频调速改造及污水处理工艺优化,实现了污水处理的降耗节能。     

夏季东海和南黄海一氧化碳的浓度分布、海-气通量和微生物消耗研究

于2013年7月对东海和南黄海海水中CO的浓度分布、时空变化、海-气通量和表层海水中CO微生物消耗进行了研究.夏季东海和南黄海大气中CO的体积分数范围为68×10-9~448×10-9,平均值为117×10-9(SD=68×10-9,n=36),呈现出近岸高、远海低的特点.夏季东海和南黄海表层海水中CO的浓度范围为0.23~7.10 nmol·L-1,平均值为2.49 nmol·L-1(SD=2.11,n=36),CO的浓度受太阳辐射影响明显;不同站位CO浓度的垂直分布特征基本相同,CO浓度最大值一般出现在表层,随深度增加CO浓度迅速减小.夏季东海和南黄海海水中CO浓度具有明显的周日变化,最大值是最小值的6~40倍.各层最大值基本出现在中午,最小值基本上出现在凌晨前后.CO明显的周日变化特征进一步证明海水中CO主要由光化学产生.调查期间东海和南黄海表层海水中CO相比大气处于过饱和状态,过饱和系数变化范围为1.99~99.18,平均值为29.36(SD=24.42,n=29),表明调查海域是大气中CO的源.调查期间CO的海-气通量变化范围为0.37~44.84μmol·(m2·d)-1,平均值为12.73μmol·(m2·d)-1(SD=11.40,n=29).调查海域CO的微生物消耗培养实验中,CO的浓度随时间增长呈指数降低,消耗过程符合一级反应的特点,微生物消耗速率常数KCO范围为0.12~1.45 h-1,平均值为0.47 h-1(SD=0.55,n=5),微生物消耗速率与盐度之间有一定的相关性.     

海洋环境水下电场时频特征分析

目的掌握海洋环境水下电场主要能量来源和衰减规律。方法结合理论研究环境电场幅值随时间的变化规律,重点分析水下环境电场不同频带的频谱分布,最后计算得到海洋环境水下电场不同频点的幅值在整个频带所占比重。结果海洋环境水下电场随海水电导率和海水运动强度的减弱,幅值降低,能量主要集中在0.01~1 Hz的低频以及工频处,在一定的空间范围内海洋环境水下电场的一致性较强。结论实验结果与理论分析结果具有一定的吻合度。     

北京市生活垃圾焚烧厂耗能排污特征及节能减排潜力

将生活垃圾焚烧厂从整体到局部分为场站-工艺-单元三个层次,通过现场调查,获取了北京市生活垃圾焚烧设施在2009~2011年不同层次耗能排污数据。分析表明,在焚烧工艺中焚烧单元处理单位垃圾的电耗达到60.83 kW·h,余热发电单元水耗最大,尾气处理单元的电耗和水耗相对较小。不同场站在处理单位垃圾时烟气和炉渣产量比较接近,但飞灰排放差异较大,在2.92~24.78 kg/t垃圾之间。渗沥液水量年际变化较大,水质相对稳定,MBR单元对污染物的去除效果最好,但其耗电量较大,占渗沥液处理工艺总耗电量的87.55%。焚烧工艺发电最优值为423.77 kW·h/t垃圾,产生的电能除满足自身需求外,还剩余1.8×108 kW·h的电能,可用于渗沥液处理工艺或输向场站外部。每吨渗沥液处理最多可产生中水0.962 t,全北京市每年产生中水196456 t/a,使用潜力大。     

下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟

介绍了一种新型的钢框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能(自定心),设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架梁柱节点的构造和工作原理,以节点的低周反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在...     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

风能资源开发利用的社会需要和发展前景

开发风能资源、利能风力发电在我国虽然只有数十年，但发展却很快。作为可再生的清洁能源越来越受到重视。不仅有巨大的环保意义，也有突出的经济效益。本文从风能利用的意义和社会需要展开论证，结合我国风能资源利用的概况，特别是结合风电装机最多的新疆的实际情况进行估算，从多侧面论述了风能资源的开发利用问题。     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.     

Urban Energy Efficiency from Cities in China and Policy Implications

Using 1995-2006 panel data for 210 cities, this article firstly measures total factor energy efficiency for Chinese cities with constant return to scale data envelopment analysis model,and then describes the features of regional differences. The results show that the changing trend displays four "reversed U" shapes. A turning point of widening gap occurred among cities in 2000 and there was a certain convergence among four regions. Urban energy efficiency level is unstable. Cities with low efficiency and high energy input will be the focus of energy-saving and reducing emissions. According to Tobit model, resource endowment, temperature, industrial structure, technology level and variety of policy factors should be treated differently in different situations.